Windows 7 experience side freezes at the base of 10 lots direct 3d

Similar Questions

• Microsoft Windows Vista Home Permium freezes to the logon screen or gets stuck

  Microsoft Windows Vista Home Permium freezes to the logon screen or crashes on the black screen with Copyright Microsoft Corporation with the load with six green bars moving through bar. It will start in safe mode. I ran the auto repair (recommended) when starting after being forced to stop. After it says its full it restarts and remains stuck on the black screen with Copyright Microsoft Corporation with the load bar with six green bars that cross so I force disable it again.

  I had no problem with this computer, he got in last seven. It was working fine yesterday and then the without wire came out, so I restarted the computer to find the connection again as I had done several times before. That's when it froze on the opening of session and password screen. Who started this cycle of freezing or stuck on the black screen with the loading bar permanently running.

  UPDATE:
  Start safe mode then made the instructions on the clean boot. Not checked, all iteams he says and rebooted and it worked. So I went to the next step to select only half to refine the list. Restarted and when at the loading screen for a little over 30 sec - 1 min (which is more short than the time it took to work initially after the first stage of the boot with all unchecked), but it goes to a completely black screen that has not happened before. So now, a little lost, or do I have to keep trying to refine?

  Hi Greg,.

  It will not harm the computer to run it in a boot environment.  Some programs do not work properly because they were probably responsible for their own services and rely on them to work.  You have disabled all non-Microsoft services, and things like printers and software can be difficult.

  Click Start, then options type power and press ENTER.  Let us make sure that the system is not configured to sleep.  Go ahead and put the power plan to High Performance, then click on change Plan settings below.  There will be a framework for "put the computer to sleep".  The value than ever.

  If it continues to turn black in clean boot mode, you may have a hardware problem.  One thing you could do if it's a desktop system and really need to use it now, it is the lid of the machine and aim a fan in the box.  This will help if it is overheating.

  Please complete the steps to diagnose the problem with the boot when you have the chance.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 49 Firefox windows aero theme change (7) at the base once opened

  However once I have start firefox in safe mode, it retains the victory aero theme. This is a new installation of firefox and the only thing I noticed is in the new version of firefox the output and minimize buttons disappeared. and when I start in safe mode, they come back with firefoxes ability to run without changing my windows again basic theme. been searching the Internet for days on it and can't find a conclusion thank you for your help

  We will try this; Type of topic: preferences #advanced in the address bar. Under Advanced, select General. Find and stop using hardware acceleration.

  Type of topic: addons in the bar addresses to open the Add-on Manager. Access key; (Mac=) A)

  On the left side of the page, select appearance. Then select Default.

  Now restart Firefox.

• How to fix Windows 7 64 bit freezes on the sleep/hibernate?

  My computer freezes constantly just before the sleep/hibernate or just after waking you. I had this experience with SP1 and without. Before you remove SP1, the HD will start to charge about 17 minutes to leave inactive. Almost exact to the minute, it will crash after 25 minutes to leave inactive.

  After removing the SP1, the system will NOT crash before going to sleep. However, it will crash as soon as you wake up. Below is summary dumps of two representative falls.

  032011-28688 - 01.dmp 20/03/2011 16:45:38 (after SP1 has been deleted)
  PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
  fffff981'0 c 002690
  00000000 00000000'
  fffff880'0143f4e0
  00000000'00000005
  NTFS.sys Ntfs.sys + c9836

  26317 031911 - 01.dmp 19/03/2011-21:20:34 (before SP1 was removed)
  PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
  fffff981'13 has 02690
  00000000 00000000'
  fffff880'01239460
  00000000'00000005
  NTFS.sys Ntfs.sys + c47b6

  As a backdrop, the system:
  HP Pavilion Elite m9400t
  Intel Core 2 Quad Q6700 @2.66 Ghz
  6 GB DDR2 2400 (Micron Tech and Hynix Semiconductors)
  ATI Radeon HD 3650
  750 GB HD Samsung HD753LJ
  OEM: Vista Ultimate x 64
  Current (academic): Win7 Professional 64-bit
  H/w bought November 2008
  Operating system: any new installation

  Programs:
  In addition to Windows, I just installed Office, Chrome, Firefox. I have installed but removed ScanSnap of UBWALL scanning software, Windows Live, Windows Security Essentials

  Devices:
  No devices are attached

  Tests already performed:
  Memory tests (memtest86, memtest86 +, WIndows)-no error
  Chkdsk/f/r (twice) - no error

  I'd appreciate any help. Thank you.

  Updated - I deleted Windows 7 Pro and re-installed Vista Ultimate OEM. It works perfectly. This excludes any possibility of h/w issue.

  I think to re - install Win 7 Pro and see if the error. Any ideas/suggestions?

• Windows 7 64 - bit freezes on the home screen with 8 GB memory

  Hello I have a Dell Dimension 5150 (64-bit) with 2 GB of RAM. I installed Windows 7 64 bit and it worked very well. Now, I have updated the memory and equip 4x2gb bars of memory. At startup, the (A07) Bios recognizes 8 GB of memory, but when the "Starting Windows" screen it freezes and it goes no further. I can get out of 4 GB of memory and it still works very well on 4 GB. I looked for answers, but I can't see clearly how to get the full memory of 8 GB works on Windows 7 64 - bit for the Dell Dimension 5150. Would appreciate someones help with this. Thank you, Tony

  Hello MaxLo,

  Thank you for visiting the Microsoft answers community.

  From the information you have provided, you are right.

  Support for memory dual channel DDR2	Up to 10.7 GB/s of bandwidth and 4 GB addressability memory for faster system responsiveness and support for 64-bit computing.

  According to the Intel site

  You need to upgrade your board or settle for 4 GB.

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New Windows 7 pro machine always prints the first page in a direction, but all other pages are printed in a different orientation

  We bought a new PC for one of our employees that is running Windows 7 Pro 64 bit. We have several printers throughout our office area. There are three printers that this person will print to the two Ricoh printstations and a Brother Laser printer. Any printer that employee uses printers still print the first page, a focus on the next page and all other pages in the other direction. The first page is always printed in the opposite direction of whatever orientation has been selected.

  If it has a four page document and select landscape as the orientation, the first page prints in portrait orientation while the other three pages will be printed in landscape. She can go back and print the document again and all four pages will be printed in the right direction. This happens no matter which printer she uses, as well as any program (Word 2010, Excel, Adobe, web pages, etc...). Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

  I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

  Hello Kluggerjo,

  Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

  I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

  If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

  If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

  If you experience any problems or have any questions, please let us know. The entire community is here to help.
  -Best regards

• For Windows Vista experience Index will be updated to reflect the Wei even than Windows 7?

  Original title:
  SCORE OF BASIC WINDOWS 7 EXPERIENCE INDEX OF 7.9

  I HAVE WINDOWS VISTA ULTIMATE 64 BIT. AND THE BASE SCORE IS 5.9 ON ALL LEVELS! HAVE YOU TRIED WINDOWS 7 RC AND THE BASE OF THIS SCORE WAS 7.9 AT ALL LEVELS! YOU DO AN UPDATE FOR THIS PROBLEM? I AM A VERY AVID GAMER AND LIKE TO KEEP THE BEST EQUIPTMENT IN MY COMPUTER! AT THE PRESENT TIME, I CAN'T SAY WHAT I MAY NEED TO UPGRADE TO INCREASE MY BASE SCORE AND I'M NOT HAPPY ABOUT IT! I KNOW THERE ARE OTHER PLAYERS OUT THERE WHO ARE HAVING THE SAME PROBLEM! I HAVE A FEW FRIENDS WHO ARE EXPERIENCING THE SAME THING. COULD YOU PLEASE GIVE ME SOME KIND OF ANSWER? I WAS ASKED THIS QUESTION TO YOU MEMBERS OF THE TEAM FOR ABOUT 6 MONTHS NOW AND DO NOT HAVE A DIRECT ANYONE ANSWER! WANT TO A RESPONSE FROM SOMEONE AT MICROSOFT! THANK YOU FOR YOUR TIME, DAVE EMRICK

  I need advice on how to upgrade my computer! Mr. TEEN geek! If I did, I would have asked!
  Obviously, microsoft has hired incompitent people manage their business for them!
  Oh by the way if you knew what that this SSD are not as fast as a raid to date configuration!
  Compared to the money that you spend and if you kept processors you would have told me that a new processor was underway to replace the 975!
  And it's MY money that pays your salary!

  You did ask what it takes to upgrade Mister! I quote: at the MOMENT I can NOT SAY this THAT I may NEED TO upgrade TO INCREASE MY BASE SCORE AND AM NOT HAPPY ABOUT IT!
  I am not an employee of Ms.
  SSD can reach speeds of up to 1 Gbit/s while PCI-Express. Hard drives, even in RAID 0 can not.
  I didn't know that Intel has been relseasing a new processor, is simply not yet out.
  If you pay my pay check you are breaking Canadian Law, as a person of 15 years I'm not allowed to work for anyone but family.
  You said: SO GO COME AND MAKE FUN OF MY QUESTIONS SILLY! I did fun to all your questions. I gave you a compliment (you have a great computer!). But you do care, you act as if you're the boss and you are the only person on Earth.

• Windows 7 freezes all the time

  Constantly crashes any program I am or what I do. Freezes when it is sitting idle. I just bought a Sony VPC F11PFX/H. 64 bit. I use MS Office Enterprise 2007 and Windows 7. Help.

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to for many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 freezes on the splash screen of Windows - in Recovery Mode, start DVD, Normal start, etc.

  Having a 64 bit Wondows 7 Home Premium on an HP Omni 120-1123w.  It freezes at normal boot and safe mode boot startup.  Get the "Windows is loading files', as the horizontal bar fills from left to right. When the bar is full the screen goes black for a second, then the phrase "Start window" will appear.  And that's all.  No converging balls.  It does the same thing if I boot from a DVD (once I get the message while pressing any key to boot from the disk).   He did the same thing when I boot from a USB flash on which I have installed Windows 7.  He even did the same thing when I hit escape to the Start Menu and press F11 for recovery of the system.

  I try to save anything on the PC.  Obviously something is damaged somewhere.  I don't know where.  I set the BIOS to default level.   I used the start menu F2 to run diagnostics.

  • CPU Test - passed
  • Connection hard drive test - passed
  • Start - passed test
  • S.M.A.R.T test - passed
  • Memory test - passed

  I then ran a sort of HARD drive test in BIOS called a DPS Self Test.   He ran for a long time, but finally passed.
  When the screen freezes, all devices lose power.  All the lights on the keyboard turns off.  If I boot from a flash drive, the flash player will Dim.

  Hello! It seems that you do every thing right and diagnostics of material seems good. IMHO you have a power supply problem or your mother Board has failed. Search

  bulging capacitors. A power supply can go wrong and get out your motherboard. Even if you have the side, turn, try to remove the RAM, using a stick at a time in different locations to see if you can start windows or load the operating system.

  Dokie!

  

• Satellite L300-1AQ freeze on the Welcome window

  Hello

  Can anyone help please. I have a satellite L300-1AQ

  the problem I have is:

  It was working OK. One day the next it would freeze on the Welcome window.
  The only way I could get it to start was F8 safe mode.
  And then it would freeze once a few minutes done repair my computer and Toshiba HDD recovery now it starts without going into safe mode but it still freezer a few minutes.

  I also tried swapping the ram from this laptop. with that out of a friends, I always freeze

  Thank you
  MB

  OS vista Home premium 6.0.6001 service Pack1
  Processor inter (R) Core 2 duo CPU T5800 @ 2.00ghz
  2048 MB RAM

  > the only way I could get it at startup has been F 8 then mode.then course it would freeze after a few minutes did fix my computer and Toshiba HDD recovery

  As I see it, * Toshiba Hdd recovery * does not solve your problem. You checked with the other memory, but it always freeze. so, I guess that a hard drive can be a troublemaker. If your laptop is still under warranty, you should contact them (SAV)

• Tiara 2012 freezes on the screen of boot on Windows 7 mahcine

  I recently had a problem starting Diadem 2012 on a Windows 7 64-bit machine. The program worked without any problems for over a year. With no other change of Diadem 2012 system freezes during the initial startup/initialization window. I tried several reboots and also tried to uninstall and reinstall Diadem 2012. None of these strategies have correctd the problem. I was curious if anyone else has had problems similar to this, and if they have found a solution to fix the problem. Any help to be a great help.

  Thank you in advance.

  Thank you, Brad. I'll keep you posted if encounter us the problem again once and it may further assess at this time.

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• Windows Vista - How can I move the buttons in the taskbar to the left side of the taskbar?

  Windows Vista - How can I move the buttons in the taskbar to the left side of the taskbar? Someone has used my computer and now they are on the right side you can see 2 programs at once. I want that they start on the left and run through the whole (not just two value windows) task bar so I can see all and switch between them by clicking on them.

  Right-click on the taskbar and unlock it. There will be low vertical bars between the sections of the taskbar. Place the cursor on one and drag it to the left. You have to play a little, but you will get it.
   
   

• The size of the base operating system Windows Vista on my Aspire 3680 282 is larger than 20 GB, is this normal

  The size of the base operating system Windows Vista on my Aspire 3680 2682 is larger than 20 GB, is this normal?

  Hello

  Yes; It's normal.

  In addition to the original operating system, you have updates, restore points of the system (set at 15% of the capacity of the hard drive) etc, etc.

  It will continue to grow.

  If you are worried about anything whatsoever, do a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  You can download this program for FREE and see what fits on the disc.

  http://www.Jam-software.com/treesize_free/

  And always scan your system for malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.