Download Vista SP1 does not load

Similar Questions

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• I recently reinstalled vista, SP1 does not appear as my OS, why it appears as my OS?

  I recently had to reinstall vista as windows not loading.

  Using the automatic update all loaded successfully. Service pack 1 has been installed successfully, but now everytime I open a 1.9 MB patch wants to install update checker, it has produced 12 times now after each one told me its success.

  I need to install SP2, but it cannot find the SP1, I can try?

  GedBrown

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you what Service Pack you have installed. If necessary.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Vista Lite does not load

  I have a Toshiba with Vista Lite netbook. I can't load in any mode. I tried the normal, safe mode, safe mode with command prompt and debug mode. I get a screen indicating the loading files Windows that changes eventually Windows is loading files with a status bar, then the typical with a status bar Microsoft company as if Windows loads. After that, I have a black screen with a mouse. Nothing else happens. Because it's a netbook, I don't have a disk drive, and I never remember getting one any boot disk. I don't have an external drive anyway, if the disc would be useless. Any help would be greatly appreciated! Thank you.

  Hello

  What do you mean by Vista Lite?

  If you are referring to what is in this link, Microsoft does not support:

  http://www.vLite.NET/about.html

  _____________________

  All I can suggest is try to reinstall using the builtin Toshiba recovery options.

  With a Toshiba, you press 0 (zero) to the starter to start the process of recovery back to the factory settings.

  See you soon.

• When I turn on my HP Pavilion dv7-1245DX Turion 64 windows vista computer does not load

  My laptop is a HP Pavillion DV7 1245 DX/Turion 64 bit running Windows Vista. When I turn on my laptop, the fans run, the lights are on, but windows only is not loading. I left on for a few hours and windows not loading always not. I would like to know if there is a way to solve this problem. My laptop is not quite 3 years old.

  Thank you
  Cori827

  Hello

  When you turn on the power, you do not get the HP Splash Screen Logo?

  The screen remains completely black?

  If so, you have a hardware problem.

  If under warranty, contact HP.

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• Windows defender does not load and cannot download Adobe flash player

  I think I have a security problem with windows defender, because it does not load. In addition, a file I have download must have the permissions of the administrator to continue, which was also changed and I had checked him to ask permission. For this reason, I can't download adobe reader. It has an error that keeps coming back whenever I try to download it, and after I executed the file, he's just in a display type of backup file, where it was downloaded, but it will not work on the second stage, when you need the permission of an administrator. I has not yet come. Can someone tell me what to do?

  "It is said that I need adobe flash player.

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  I have the fire threat and no other protection against the virus.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• Urgent - Vista does not load

  OK, I guess I better start from the beginning. My computer came with Vista and I installed Xp with it only to remove it later. Once I took it off I tried to delete the windows startup menu, because he still had listed XP. I read on a website that I had to remove the c:\boot directory and this should solve the problem. Now vista does not load. It says "missing system32\hal.dll"

  I have the HP recovery disk, but I would lose all data. I have a copy of Vista, but it does not seem to be initiated. I can't cross the screen with the error message. Can anyone help?

  Hello

  Download Windows Vista Recovery Disc to correct and choose repair system.

• Vista recognizes the printer but does not load the drivers - error 0x000003eb

  Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

  Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

  Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

  I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.

  After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
  Mac OS X 10.7.1
  Firefox 6.0.2
  Flash 10.3.183.7

  The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox

• Install Microsoft updates yesterday & today I click on Firefox and it does not load. If I go to download a new Firefox, it tells me to close Firefox before downloading. I can't see Firefox open anywhere.

  Firefox does not load and I can not download a new Firefox because it says that I have to close the existing one. I can't find an existing open anywhere. When I went to download, I got a warning that the new Firefox can damage my computer.

  The procedures described in article Firefox does not start - solutions can help, in particular, that resembles this error, error message "Firefox is already running but is not responding" - how to fix

• Why Windows Vista does not load user profile?

  When logging on it says unable to load the user profile, but the profile is there when I log in Administrator account, how do I recognize my account that I used to use? Everything worked fine until I went to reboot my Dell Vosstro 220, running Vista SP2 with all latest updates... He went to the Startup Repair, and after awhile, I was dirrected to restart the computer. When it restarted, it went to a temporary user profile named after one it starts normally, but there was 3-0 and temp after the profile. So the desktop icon were almost all gone and when you run a temp profile nothing is saved in it when you use... I've logged on to the administrator account and under C:\computer\users my account, I used to use with 2 temporary accounts. One was exactly like my normal account (mountain), but with temp000 after her. I went to Microsoft Answers and he said to go to regedit and find the profiles under machine\software\microsoft \windows NT\profiles and change the name of the supposely accounts 2 so it would not load the Temp account. I followed the instructions to a T and everything is OK except that now it does not load the Temp file, it just says: windows could not load the user profile. I have to hit Control, Alt, delete to bring up the Task Manager and then type Administrator and password that works very well. When I click on administrator, it displays the screen with all that on the computer. MountainMan used to be there under administrator, but he disappeared. If I go down to users in a subcatigory under computer and users it lists all of the accounts that I should be able to access. All the information is there, it doesn't seem right to see as an account profle to load up. I've always had it set to start on MountainMan account without password. Now it takes forever to load the administrator account. It must also be typed in each time instead of remember accounts. How can I get MountainMan load again? The info is there, but he doesn't seem to know the location more. Even when I type in MountainMan it just says unable to load the user profile. I don't know if typing in the name of the account is the same problem or if I have 2 problems. I appriciate any help to correct this situation. Also just FYI, I deleted temporary files after changing names, in which case they were confusing.

  Hi James,

  1. When you created a new user account, have you configured it as an administrator?

  2. When you connect to the old user profile you are able to view your data?

  You can check out the following link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-do-i-change-folder-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed

  The above link contains third party links.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please consult the following link:

  Troubleshoot "access denied" when opening files or folders

• "Review updates" Vista sp2 page does not load.

  My computer has windows Vista Home Premium sp2 32 x and updates are checked for every day. There are 2 updates important and 2 Optional updates listed at this time. When I try to "review updates" category either important or optional page does not load. It is a problem for several months now. I wonder what are these updates and why I am not able to view them. I am the administrator and the only user of this computer. It's not part of a corporation, company or home network...

  Hello

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  I would temporarily disable all security software and check if the problem persists.

   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.