Download windows vista service pack 1 issue

Similar Questions

• Code800F900 'unknown error in windows update' trying to download windows vista service pack 2

  try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter

  * Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl

  Why did you delete your post where you said that Norton application has been installed at some point in the past?

  There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!

  Let's cut to the Chase. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After downloading Windows Vista service pack 1, my computer screen had the blinking message "!" Oxc 0000034! 250/92313 (program_files_windows_calendar_4998559750

  I restarted bit keep getting option start normally or run repair program. ATER prog of running repair, he says he could not solve the problem and only asked if I wanted to report it. Computer wont even start in safe mode. Damage in the registry? Anyway my computer software was loaded at the factory and I don't have a recovery with her disk. Is there anyway that I can enter the partision to reload Vista? Otherwise, someone ' one can suggest how to fix my startup boot up?

  Hi coopervane,

  You can try a system restore by booting from the Windows Vista disc. Will need you the Windows Vista disc to do an offline system restore. You may need to contact the manufacturer of the computer or make arrangements for any Windows Vista disk that will help you start the computer and go to optins Startup Repair tool.

  To use offline system restore, you must have a Windows Vista CD or DVD. In addition, your computer must be configured to start from the CD-ROM or DVD drive. In some cases, you may need to change the settings of the BIOS on the computer to configure the computer to start from the CD-ROM or DVD drive. For more information on the configuration of the computer to start from the CD-ROM or DVD drive, see your computer documentation or contact the manufacturer of the computer. A recovery disk will not help, because it will erase all your data.

  First of all, start the computer from the reader. To do this, follow these steps:

  1. Insert the Windows Vista CD / DVD and restart the computer.

  2. When you receive the following message appears, press a key:

  Press any key to start from the CD or DVD.

  3. set the following preferences, and then click Next:

  o language to install

  o time and currency formats

  o keyboard or input method

  Then, use the offline System Restore to remove the service pack of Windows Vista. To do this, follow these steps:

  1. click on repair your computer, select the operating system you want to repair if necessary and then click Next.

  2. click on System Restore, and then click Next.

  3. click about to restore that corresponds to the date of installation of the service pack. The Restore Point will be labeled either install: Windows Update or install: Windows Vista Service Pack .

  4 confirm the disk hard that you want to restore, and then click Next.

  5. click Finishand then click Yes when you are prompted.

  6. when the system restore process is complete, click restart to restart the computer.

  7. when the computer restarts, click close to confirm that the system restore completed successfully.

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning

  Rehman - Microsoft Support

• I have Vista 64 and when I download Windows Vista Service Pack 1, I lose my system. I'm trying to upgrade to Windows 7 64.

  My Vista system has crashed into two different time after I was told to put in Vista Service Pack 1 level. The system tells me to do Service Pack 1 before I can run Windows 7 64.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Vista 64-bit.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  After taking care of all the foregoing, Windows Update will eventually offer several SP1 prerequisite updates (e.g., http://support.microsoft.com/kb/955430;) ( http://support.microsoft.com/kb/947821) and then SP1 itself. After that you got SP1 installed, you will be able to run Win7 64-bit.

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent computer (i.e., not BigBoxStoreUSA) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I cancelled the update of Windows Vista Service Pack 2 (KB948465) and now I can't get it to download?

  I have started to download Windows Vista Service Pack 2 (KB948465) but cancelled it.. and now I want to download and update, but it does not display on my update list... any help?

  You can download the Vista SP2 standalone installer:

  • Download the SP2 32-bit from the Download Center

  • Download the SP2 64-bit from the Download Center

  To see if you have Windows 32 or 64-bit:

  1 open the system by clicking the Start button, right-click computer, and then clicking Properties.

  2. in respect of the system, you can view the type of system, it will say 32 or 64 bits.

• Windows Vista Service Pack 1 download failed (Error 80070002)

  original title: failed to download Windows Vista Service Pack 1

  Running Windows Vista Edition Home Premium.  Get the error number 80070002 trying to download Service Pack 1.  Have tried all fixes listed without result.  Help, please!  Thank you.

  Have you tried this one also?

  http://support.Microsoft.com/kb/910336

  If you have had and without his help, you can ask in a more technical forum.

  Try is:

  Windows Vista IT Pro - Windows Vista Service Packs Forum

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/threads

• Error Windows Vista Service Pack 1 (KB936330)

  I have Windows Vista and I tried to download Windows Vista Service Pack 1 (KB936330), but when I do I get an error message, "WindowsUpdate_80071A91" "WindowsUpdate_dt000"

  Hi Isaac,.

  Please contact the Microsoft Community Forums. I understand that when you try to download Windows Vista Service Pack 1, you get an error message indicating "WindowsUpdate_80071A91".

  Follow the steps for troubleshooting steps.

  Method 1:

  I suggest that you run repair.

  Check out the link to run repair.

  The problem with Microsoft Windows Update is not working.

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  I suggest you link and perform the steps of troubleshooting from the link.

  How to troubleshoot the installation of the service pack, Windows Vista and Windows Server 2008 issues.

  http://support.Microsoft.com/kb/947366

  WARNING:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  I suggest you link and perform the steps of troubleshooting from the link.

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the issue still persists after completing the steps of troubleshooting from the links and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• Need to install Windows Vista Service Pack 2 64-bit

  Can what link I download Windows Vista Service Pack 2 for 64 - bit? Windows updates do not invite me to this update/upgrade to update after I erased from my hard drive and reinstalled Windows. Any help is appreciated.

  http://support.Microsoft.com/kb/935791#Method3

• Windows Vista Service Pack 2 (SP2)

  When I download windows vista service pack 2 (SP2), it will erase all my data and files?

  Hello

  It should not affect your data by downloading and installing a Service Pack.

  But having said that, in the calculation, there is no guarantee

  Make sure that you have a backup

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• Don't have Windows Vista Service Pack 2 installation

  My computer has downloaded Windows Vista Service Pack 2, but he never finished the installation. It will start the installation, but after waiting for two or three hours, it still shows zero installed. Someone at - there experience this problem, and if so what needs to be done about it?

  Adequate preparation may make all the difference when you install a service pack.

  How do I install the Vista SP2

• Problems after downloading windows vista service packs__

  After you download Windows Vista service pack 1 and 2 javascript no longer works in Internet Explorer, also firewall is still disabled.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• I am repeatedly offered Windows Vista Service Pack 1, even though I downloaded and installed successfully.

  Original title: Windows Vista SP1 64 bit (KB936330) 1.5 MB update.

  I just reformat my computer and am trying to do the update process.  I use Microsoft Vista 64 bit and got most of the SP1 is installed.  TI completed most of it restarted, full of a few other updates and is now stuck on 1 part of the update.

  He keeps asking to install "Windows Vista Service Pack 1 for x 64-based Systems (KB936330) which is a 1.5 MB file.»  I go through the process.  He told me that I downloaded and installed successfully, and then when I hit the button to Windows Update, there is still wanting to be installed.

  I'm sure that this issue has arisen before but most of what I saw refers to the two error codes or problems with the installation of SP1 together.  Help, please!

  I had the same problem, I must have downloaded and installed sp1 about 10 times and there is no way that he was only 1.9 MB.

  I finished downloading it manually from the main site of Microsoft.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30
  Once you are done installing the update and Windows update tent always updated sp1, simply click on "check for updates" at the top left of the window, and who should confirm that sp1 has been updated and it should not try sp1 update more.
  It took about 1-2 hours in total, but it worked for me, hope this helped.

• WINDOWS VISTA SERVICE PACK 1 (KB936330) says it is downloaded, but it is not

  My PC recently had to be rebuilt from scratch. It now seems to work fine except that this update is continually need to be downloaded.
  When I try to install the update by "preparation for installation" create a restore point, and then opens a box saying "Welcome to Windows Vista Service Pack 1", then me to accept the terms and conditions then produces a window telling me that it can take several hours to install etc. When I click on install it instantly tells me that it has been correctly installed. Meanwhile the PC continues to tell me (and remind myself whenever I start) that I need to install a major update - WINDOWS VISTA SERVICE PACK 1 (KB936330)!

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• My Windows Vista Service Pack 1 (KB936330) will download but not install it on my PC.

  My Windows Vista Service Pack 1 (KB936330) will download but not install it on my PC.  Clues on how to install?  In addition, SP2 is eventuallu\y installation.  Should I still SP1 so had installed SP2?

  Hello

  1. what anti-virus software do you use?

  2. What is the exact error message that you receive?

  Service Pack 1 is a prerequisite for installing Service Pack 2. It could be the Service Pack 2 for some other day.

  Reference:

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

• I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

  original title: Error Message 0 X % 1 in the message file for %2
  I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

  How I can fix

  Hi SusanReid,

  1. what email program are you using?
  2. you are trying to download from webmail or any mail client?
  3. don't download you and save the attachment or open it directly?
  4. What is the brand and model of the printer?

  I suggest to save the attachment and then print.