Download windows vista with additional recovery process recorder monitor disk 1 and 2 more system treats... recovery time remaining 16; will not simply stop 39: 30

Similar Questions

• Restart the error for Windows Vista with the recovery disk

  I bought a Toshiba Satellite A355D-S6889 about two years ago. It came with Windows Vista. I subscribed to Norton AntiVirus and it totally messed up the computer. We lived with a duration of 5 to 10 minutes from start-up. In addition, many programs crash and it takes a lot of time for anything to work. I decided to for a recovery and a restore using the disks provided with the laptop. I followed the instructions, but it keeps hanging up on the second disc.

  I tried to use a method that I found searching for forums (restart the computer by pressing '0', but I got lost on the loading cycle.) I'm not very strong programming and I guess when a CD provided by the company must be used for recovery, it should work.  All my programs were legitimate, I want just my OS back so that I can use my computer.

  Help, please. Thank you.

  I bought a Toshiba Satellite A355D-S6889 about two years ago. It came with Windows Vista. I subscribed to Norton AntiVirus and it totally messed up the computer. We lived with a duration of 5 to 10 minutes from start-up. In addition, many programs crash and it takes a lot of time for anything to work. I decided to for a recovery and a restore using the disks provided with the laptop. I followed the instructions, but it keeps hanging up on the second disc.

  I tried to use a method that I found searching for forums (restart the computer by pressing '0', but I got lost on the loading cycle.) I'm not very strong programming and I guess when a CD provided by the company must be used for recovery, it should work.  All my programs were legitimate, I want just my OS back so that I can use my computer.

  Help, please. Thank you.

  Hey stileaux

  each manufacturer has its way of using their own recovery process

  for the best support, please contact toshiba to the below link and ask them how to use their recovery process

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Walter, the time zone traveller

• I would like to re - install Windows Vista, but my drive does not all service packs. Download Windows Vista with service pack already on it?

  so, I'm running vista 64 bit basic, I want to do a fresh install,

  but my drive is very early (noservice packs ect) can I download of ms a basic family of complete up-to-date vista 64-bit with sp2 with my cd key? or should I shut up and make from my cd and cope? If I do a reinstall should I reinstall all my programs as well?

  Hello yaleblor,

  You can download the full SP2 for Vista from here: http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Save the file to a CD/DVD or USB key.

  Once you have the service pack downloaded file, you can use your current Vista CD to install a fresh copy of Windows Vista on your C: drive. Once you have installed Vista you can install service pack 2 directly from the CD/DVD or USB you originally stored it on. All you then need to do is to run the Windows updates to update your system completely.

  You can find out how to do a clean install by looking at this link from my Web site: http://vistasupport.mvps.org/install_windows_vista.htm

  After you install Windows Vista, you will need to re - install all your programs, so make sure that you have all the programs by hand before starting to consider reinstalling Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• When opening my windows email he invites me to verify my user name and password are correct for my mail server, but will not accept the information upon entry

  Account: 'mail.luckyinloveweddings.com', server: 'mail.luckyinloveweddings.com', Protocol: POP3, server response: '-ERR failed authorization ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  This is the error message.  This problem started only yesterday.  I have since uninstalled AVG and installed Microsoft Essentials and removed/added my e-mail account.

  Hello

  1. What on the computer email client do you use?
  2. who is your provider of mail Service?
  3. don't you make changes on the computer before the show?

  4. you use Windows mail to access this email?

  If you have problems with Windows Mail, you can consult the links provided.

  Working with Windows Mail in Windows Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail
  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish
   
  If you are using a different e-mail client, you can reply back with more information to help you best.

• Windows (vista) could start even in safe mode. disk repair and system restore do nothing. all comes back to the same error screen

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\config\system

  Status: 0 x 0000225

  Info: Windows could not load because the system registry file is missing or corrupt.

  Enter = continue or esc = exit

  I put in the repair disk and need to "select" system none were so I click Next and let it run for the night, about 12 hours later the blue progress bar was still in progress on the same window so I guess it doesn't work anymore. I would like to reinstall windows, but I can't drive to format...

  Go into the BIOS

  Then look for boot options, or boot order
  Change the boot order to boot from the CD / DVD rom (i.e. does not start from the HD, boot from the cd to install disks).
  Now you can do a full reinstall but that your last resort.

• Satellite Pro L300 - what I can reinstall Vista with the recovery disk?

  Hey

  I dual-boot (running Windows Vista & Win7) and if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  And I have another drive on my computer for recovery Partition so I can use my recovery CD to reinstall Windows vista if I want once I got rid of him and would it erase my win7 disk or remove the duel boot?

  My specs are:
  Intel Pentium
  2 GB OF RAM
  Hard drive 160 GB

  > if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  You can use the recovery disk to reinstall Vista on your laptop but as Luke mentioned, the recovery disk would format the whole HARD drive. It would erase all partitions on the HARD drive and you will lose also the installed Win 7!

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Reinstalled Win Vista with the recovery CD that I got with my HP Pavilion, now get quick activate Windows with a new product key.

  Reinstalled Win Vista with the recovery CD that I got with my HP Pavilion, now get quick activate Windows with a new product key.  MS sticker on the tower is one that says 'Vista', no product key.  When I go to activate Windows, I offer the choice to buy another copy of Windows or enter a new product key.  A run the Genuine Advantage tool and he says it's "authentic."  HP will not help, they say I have to buy another copy of Windows from MS, but I already paid for it when I bought the machine.  What can I do?
  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 27HYQ - XTKW2-WQD8Q
  Windows product key hash: U8YEZzymoD4DMyaMb32rPrNIS90 =
  Windows product ID: 89578-OEM-7332157-00061
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {168A88C1-E5B9-4D60-9CED-7F52DA3B003F} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.101014 - 0432
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {168A88C1-E5B9-4D60-9CED-7F52DA3B003F}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-WQD8Q89578-OEM-7332157-000612S-1-5-21-1435749754-187019022-2857907007HP-Pavilion,RK573AA-ABA a1710nPhoenix Technologies, LTD 5,0720070319000000.000000 + 000B5303507018400F810090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500061-02-1033-6000.0000-0852011
  Installation ID: 012511236930294740295602407015475991935936271095890640
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: WQD8Q
  License status: initial grace period
  Time remaining: 15840 minute (s) on (11 day (s))

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OAAAAAEAAgABAAEAAwACAAAAAwABAAEAJJSQuYpR4jtIJGQJ9DG0EIC68vQa7DYXAnisVr34jrY =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Your tour definitely had a COA sticker initially (or at least if it does not, the HP was in breach of its contract with MS conditions).

  Let's try a possible alternative solution...

  Note that the key comprehensive OEM_SLP used here is * removed the product key for privacy * and you must enter if asked...

  Your license store is perhaps corrupt - please try the following...
   
  Please try the steps below to re-create the files of the Bank.  This can solve the problem.
   
  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.
  (12) you may need to enter you product key and activate it.
   
   
  Once complete, please post back with a new report MGADiag

• Need for basic Windows Vista Home Edition recovery media

  I lost my windows vista home basic DVD. I have my key windows vista with me. can I get a duplicate dvd or can I use another dvd with my cd key?

  Read the info below re borrow a Vista DVD.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Download Windows 7 with product key and activation

  Hello

  Can someone help me how to reinstall and activate windows 7?
  I bought the computer dell laptop a few years ago that came with Windows 7 home premium.
  Now my system is not at all start due to a problem. My recovery disk also does not work.
  I have a product key that is written on the battery label.
  So are there any why I can download windows 7 with this product key from the Microsoft Web site? and reinstall the OS?
  Please help me!
  Thank you best regards &,.
  Sadanand

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots

  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• My computer will not download windows vista sp1

  I tried the update of windows vista sp1, and it continues to fail. I even tried manually upgrade and still nothing. I recently bought an external hard drive and I thought that I formatted it to my pc and mac. Well my pc does not recognize it because sp1 is not installed. I can't yet do a clean restore and download windows vista because I don't have the CD. Is there anything I can do to receive sp1. I see that many people have had this problem.

  Hello

  How have you tried to manually install SP1?

  SP1, SP2, and then should be installed years ago

  ___________________________________________________________

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  To reinstall Vista.

  You can contact your computer manufacturer and ask them to send you a set of recovery discs, IF it is still available.

  They should do this for a small fee.

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Restore factory settings doesn't work does not and did not reinstall Vista drive, download Windows Vista Home Premium

  Original title: Vista

  I need to re download windows vista home premium because: 1-workstation is not come with a disk and 2 - my system back to factory settings does not work

  Hello

  Here are the different methods to reinstall Vista; See suits you the method...

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Need to download Windows Vista Premium Home Edition

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  Hey mklafert

  Sorry for the eve of Christmas, but there is no legal or free vista doesn't download only internet pirated versions that you would not want t for a gift

  I suggest that you contact acer and ask them to send you a set of disks of replacement for recovery of the acer link below but it will take time

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  But if you can borrow a microsoft dvd vista not acer hewlett-packard or the like discs of recovery of a friend or relative you might try to install vista in this way using your product outside of the laptop case key to install the family version correct vista premium of the dvd, and then go to acer and get the right drivers for your computer laptop model number

  Just make sure you get the good dvd vista

  There are two microsoft vista DVD produced is 32-bit and the other is 64-bit

  most of the computers came with 32 bit installed unless he asked a 64-bit

  and if you happen to also have a recovery on your computer partition acer laptop, you can start the recovery to factory standards by pressing Alt + F10 at startup

  There used to be a password you need to enter too

  It was 5 or 6 zeros

  If necessary, contact acer for this information

  I hope that you have a happy holiday season

  Merry Christmas

  Walter, the time zone traveller

• Where to download Windows Vista Italian?

  My client to have Windows Vista Italian, finally he left the original CD to the Italy, so where I can download Windows Vista full in Italian?

  Thank you

  Windows Vista is not available for download in any language.  I'm sorry.

  If your customer has purchased the computer with Vista already installed then your customer can order recovery DVDs of the manufacturer of the computer, taking care to order discs in the original Italian.

• Unable to reistall Windows vista on a recovery disk

  Unable to reistall Windows vista from the recovery disk, he asks a second disc that I do not have... .and then say bootmgr is missing... tried on the Startup Repair option sistem recovery... .then attempted to rebuild the BCD store by using bootrec.exe in the recovery window, etc. etc.. all help would be really appreciate. Thank you

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts