DPC violation watchdog 8.1 windows

Similar Questions

• Satellite C50-A428 - dog of GUARD of DPC VIOLATION error message

  Hello

  Recently, I do factory reset for a C50-A428 laptop with recovery media
  After completing the copy and installing during startup it goes black screen for awhile and displays this error DPC_WATCHDOG_VIOLATION

  Please suggest me what can be the reason, the cause and the solution for this error...

  Hello

  Try to put the HARD drive as first boot device in the BIOS and save the changes.
  If this does not help, perform the procedure of recovery once more.

  Your comments would be appreciated.

• CPD WATCHDOG VIOLATION WINDOWS 8

  Hello! I have been reading posts on this violation of dog guard, but unlike the others, I have no idea what is causing my laptop (VAIO E series) freeze and restart with "dpc violation of guard dog. I use my laptop primarily for surfing the internet and download torrents. also, I don't know how where and how to register my windows minidump to a temporary location. Thank you!

  Hello

  Check with Sony Support, their online documentation and drivers, diagnostics and ask for their
  Forums about known problems.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forums
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  ======================

  Check out these resources:

  Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">
  http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspx

  BBCode: 133 0 x 00000133<-- read="" this="">
  * 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate these methods of Windows 8 (there is little real difference):

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =======================================================

  Run checkdisk (chkdsk /f r)

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8 - why isn't Windows find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If the driver verifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CPD Watchdog Violation on my Toshiba Satellite and impossible to verify updates

  I had Violation Watchdog DPC on my Toshiba Satellite. It's frustrating to worm. How can I solve this problem?

  Here's my minidumps files https://skydrive.live.com/redir?resid=67BCFC4F8EC6B99B 107

  Hi Sheikh R,.

  You seem to have two software antivirus/firewall in real-time installed, Norton and Avira which can cause stability problems.

  Can you uninstall Norton and Avira and see if that helps.

  For security software consider using just firewall and antivirus integrated Windows 8 (Windows Defender).

  I would also uninstall the c:\windows\system32\drivers\sptd.sys pilot who has been known to cause blue screen errors in some configurations.

  Uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it's Daemon Tools or Alcohol 120%.

  Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:

  http://www.duplexsecure.com/en/FAQ

• Watchdog on the emulator Windows work?

  Two questions:

  (1) where I see the State of the identified bugs (ie: MOUR-xxxx)?

  (2) is the functional watchdog for the Windows on Java ME emulator shipped 8 EA?

  This code closes just immediately, rather than wait for 60 seconds.  Subsequent starts indicate the

  Watchdog due to reboot.

  SerializableAttribute public class WatchdogIMlet extends MIDlet {}

  private WatchdogTimer guard dog;

  Private final String watchDogName = "WDG";

  Private final int watchDogID = 30;

  Private final long ChiendeGardeExpiration = 60000; 1 minute

  @Override

  public void startApp() {}

  Open the watch dog

  try {}

  Guard Dog = PeripheralManager.open (watchDogName, WatchdogTimer.class, (String []), null);

  If (watchDog.causedLastReboot ()) {}

  System.out.println ("restart result is a timeout of dog look!");

  }

  System.out.println ("Starting WatchDog Timer...");

  watchDog.start (watchDogTimeout);

  } catch (IOException ex) {}

  System.out.println ("creating/starting IOException watchdog:" + ex.getMessage ());

  }

  new timer() .schedule (task, 30000);

  }

  ....

  Hi tmcginn, unfortunately it is not possible to verify the State of bug because it is marked for developer access only. About WD, I confirm the problem. As a workaround, I recommend using the SDK3.4 until what ME8 release. / Sergey

• PXI-8110 update to Windows 7 image

  I was wondering if someone has updated their controllers to a new OS?  Specifically, we received earlier this year a couple of PXI-8110 controllers incorporated with the gradient to XP option.  But now we wish we had Windows 7.  I was jumping that NEITHER would be able to provide the Windows 7 CD recovery of for this controller (because Windows 7 is an option) and I would have to pay the Bill for a license of Windows 7.  However, they said that it was not possible (OR - Please correct me if I'm wrong) and I have to install it myself.  So, any advice on this process would be appreciated.

  Thank you

  Paul

  Here are two INF files for drivers who have not installed correctly the first time.  Sara had sent to you about a month, there are and said they worked for you.  I am posting here in case someone else needs them as well.

  Note: This is not the ideal way to install drivers for a PXI controller.  The controller should come image correctly with all necessary drivers and the recovery disc as well.  If however you encounter the same situation, then you can try these.  They are drivers for the delivery of trigger PXI and WatchDog Timer for Windows 7 on the PXI-8110.

• I get the error access violation

  I was do an access with third party software Violation, three, four, five times a day. I end the process in my 3rd party and Outlook program in the Task Manager / processes. But I'm still the access violation error.

  Access to the 008BC16F address violation

  Access to the 00523588 address violation

  I have Windows 7 and office 2013-32 bit. The 3rd party program is compatible with it. The extension is .msi

  I am the administrator of my machine.

  Please, can someone help me?

  Thank you

  Response of Linney here--> http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/access-violation-error/19d85a13-e416-4842-9646-93bfd115cff1

  If this does not help, you might mention the name and the version of the program 3rd party or ask for help for technical support for this program.

  Linney mention looking for malware.

  instructions

  What is the name and version of your anti-virus program?

  If you did not recently, download, install, update and run these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

• BSoD after updating drivers

  Mini092811 - 07.dmp 28/09/2011-14:59:23 KERNEL_MODE_EXCEPTION_NOT_HANDLED 0x1000008e 0xe0000001 0xb83d8925 0xb2c30e9c watchdog.sys 0 x 00000000 watchdog.sys + 925 Watchdog Driver Microsoft® Windows® operating system Microsoft Corporation 5.1.2600.5512 (xpsp.080413 - 2108) 32-bit watchdog.sys + C:\WINDOWS\Minidump\Mini092811-07.dmp 2 15 2600 94 208 925

  Mini092811 - 06.dmp 28/09/2011-14:40:10 KERNEL_MODE_EXCEPTION_NOT_HANDLED 0x1000008e 0xc0000005 0xbd09b7f0 0xb2678bb8 0 x 00000000 nv4_disp.dll nv4_disp.dll + 897f0 NVIDIA Windows XP Display driver, Version 280.26 NVIDIA Windows XP Display driver, Version 280.26 NVIDIA Corporation 6.14.12.8026 32-bit nv4_disp.dll + 897f0 C:\WINDOWS\Minidump\Mini092811-06.dmp 2 15 2600 94 208
  Previous error DIRECTLY above was due to obsolete Nvidia drivers

  Current error must be due to defective drivers... Please advise on what could be the problem, because I always get the BSoD when I watch Youtube videos.

  SPEX system: Microsoft Windows XP... SP3... /4gig 1.80 GHz RAM Dual Core 4300 / PCI Geforce 8500GT Graphix

  Hello Vic_007,

  If this started after updating Nvidia drivers, you can reinstall the previous drivers series that you were using for the moment, keep an eye on new Nvidia drivers in the meantime.

  Also, can you zip the contents of the C:\windows\minidumps folder and post it in a public folder on http://skydrive.live.com?

  After that, post the link on this thread so that we can look at landfills.

  Best regards

  Matthew_Ha

• Hotmail is blocked & the other email is it not my friend to us how to change back to the top e-mail account

  my friend tried to access her hotmail account * address email is removed from the privacy * & got a response that his account has been blocked, someone could have used his account to send lots of spam or anything else that violates the provisions direct windows & then when it supported on continue he said where do we need to send you a verification code & the only option she has is * address email is removed from the privacy * & this is not at him & she cannot reset his password, & then responded that a verification code sent to * address email is removed from the privacy *.  With his permission, you can send the authorization code to myself or * address email is removed from the privacy * is the email from his work.

  Thank you

  Hello

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/

• Windows 8 How can I solve violation of CPD watchdog

  Hi everyone I have this violation of watchdog of dpc error or problem

  I have no anti virus I use windows defender
  Here's my minidump files
  https://SkyDrive.live.com/redir?RESID=4FA3638D1C4E9D1B! 393 & authkey =! APe7M18qfTisH0o
  Thank you

  Of course, it's a driver problem.  Please run the Driver Verifier to find what's wrong to behave

  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  But sometimes it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Click Start and type "auditor" (without the quotes) and press enter
  Select 'Create a custom settings (for code developers)' and click 'Next' (or Type "check/standard/all" (without the quotes) If you want to check each of them (this will slow down your computer))

  Choose "Select custom settings from a full list" and click "Next".
  Select the entire document except for "Low resource Simulation" to win 8 do not check concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select driver names from a list", then click "next".
  Select all drivers that are NOT provided by Microsoft, and then click "Next".
  On the next page, select "Finish".
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  Further reading
  http://support.Microsoft.com/kb/244617

  Words of driver verifier
  Information check driver driver Windows Vista - Microsoft Search Verifier
  Questions of Verifier within Vista / Windows 7 http://support.microsoft.com..default.aspx?+verifier1&res=20
  Pilot feature pool http://support.microsoft.com/kb/188831

• Windows 8 Pro - blue screen with CPD Watchdog continuing Violation coming

  I just installed Windows 8 Pro four days ago on my new PC (two months) that came with Windows 7.  I randomly get the blue screen with Violation of CPD watchdog, and the PC restarts.  It is very frustrating and never had this problem with Windows 7.

  Also, on my desk, get Ezupdt window warning and I was wondering if it is related?

  Hello world

  Problem solved.  My free version of AVG 2012 was the root cause of the problem.  I was able to get a free through Microsoft consultation as my warranty period of Windows 8 is still valid (less than 90 days).

  Time AVG has been removed, the problem has gone.

• Windows 8 - repeated screens CPD Watchdog Violation blue

  Separated from this thread.

  Hello

  I have the same problem also when I use MSI afterburner windows crash and displays the DPC_WATCHDOG_VIOLATION message.

  Can u please help me

  THX

  Hello

  Well check with MSI Support, their drivers and documentation online and ask in their forums
  on the known issues and solutions. Obviously you shouldn't use MSI Afterburner if she is originally
  blue screen problems, the cause is obvious.

  Support MSI
  http://www.msi.com/index.php?func=service

  MSI - Downloads (drivers and BIOS)
  http://www.msi.com/index.php?func=downloadindex

  MSI - Forums
  http://Forum-en.msi.com/

  MSI - Service
  http://us.msi.com/index.php?func=service

  MSI - Live Update online
  http://www.msi.com/index.php?func=downloadindex

  MSI - Contacts - USA - North America value
  http://www.msi.com/index.php?func=HTML&name=aboutus

  ===============

  Check out these resources: the real solution will probably come from MSI.

  Bug check 0 x 133 DPC_WATCHDOG_VIOLATION<- read="" this="">
  http://msdn.Microsoft.com/en-us/library/jj154556 (v = vs. 85) .aspx

  BBCode: 133 0 x 00000133<-- read="" this="">
  * 1340.html? order = date http://www.faultwire.com/solutions-fatal_error/the-DPC-Watchdog-detected-a-prolonged-Run-Time-at-an-0x00000133-

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1
  
  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =======================================================

  Run checkdisk (chkdsk /f r)

  Windows 8/8.1 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8 and 8.1
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names (and BIOS and chipset).

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ========================================================

  Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC (Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to update Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a USB Flash Drive recovery or other methods:

  How to create a recovery USB in Windows 8 & 8.1

  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  How to start on the "System Recovery Options" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  Boot to the tip "Startup parameters" in Windows 8 & 8.1
  http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

  ----------------------------------------------------------------------------------------

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If the driver verifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• CPD Watchdog Violation Windows 8 [SOLVED]

  Hello!
  Occasionally I get the DPC_WATCHDOG_VIOLATION. Used when I play games. I use the laptop Asus n56vz and SSD OCZ vector 512 GB. I tried to update all drivers, BIOS, and Firmware of the SSD, but I still get the error.  I have used NOD32 Antivirus I uninstalled it but still have this error.

  Here's the C:\Windows\Minidump:

  https://SkyDrive.live.com/redir?RESID=E828D84DFAA824B6! 147 & authkey =! ADvi_ktAtwgPGMg

  Thank you for your help.

  I think the question can be counted as solved now. No more BSOD after installing the seller of the laptop ASUS NVIDIA driver.

  Thank you all for the help.
  I hope that this thread will also help other people.
  I can't mark my reply - as the answer to the Question. So I only renamed the 1st post.

• Windows 8 will not start, violation of CPD watchdog, freezes on login/black screen with no cursor.

  I'm in my intelligence ends right now haha.

  In December, I bought a PC mainly for gaming
  basic specifications are: GTX 770 2 GB
  Intel i7 4770 k
  16 GB of ram
  I use windows 8 - and it happens when I start my pc I get the screen of the bios/Mo to be greeted with a black screen or a frozen login screen which then proceeds to a BSOD with error DPC_WATCHDOG_VIOLATION.
  I solved this problem several times but he returns
  The first time that it was because of windows download old graphics drivers through automatic updates, so there was a pilot clash and windows wouldn't load, so I fixed that by just go into safe mode and uninstall said drivers. It happened again a week later, but had automatic updates and had not downloaded a new software/firmware...
  So I did the same thing once again, just uninstall some drivers and everything was going well until I tried to restart my computer and just again got the bsod...
  Could this be something else? SSD firmware? Device Manager indicates its up-to-date.
  Something more - my integrated gpu does not work (screen does not receive a signal) if it seems a little suspicious.
  I cannot uninstall the nvidia drivers (which seem to be the problem) and therefore can not solve my problem.
  ANY help appreciated. Knowing me I am probably missing something super base hehe
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  We prefer at least 2 DMP files to track trends and to confirm the cause.

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Just curious, are you overclocking?
  

• CPD Watchdog Violation when connecting to Internet

  I just built a new computer and I had a problem with the connection to the Internet.

  After you have installed the network adapter and the drivers that come with the CD I have connected to my home network.  It worked for maybe a minute or two, but then my computer would freeze for maybe about 5 seconds then blue screen with the message «Violation of Watchdog DPC»  This happens whenever I try to connect to the Internet.

  As far as I know all my drivers are up to date, as I installed them directly from disks accompanying parts.

  I don't have any installed programs other than the stuff that comes with Windows and some drivers.

  DPC_WATCHDOG_VIOLATION (133)
  The CPD watchdog detected an extended operation to an IRQL of DISPATCH_LEVEL level
  or higher.
  Arguments:
  Arg1: 0000000000000000, just a DPC or ISR exceeded his time d. Delinquency
  component may generally be identified with a stack trace.
  Arg2: 0000000000000501, counting from the time the DPC (in ticks).
  Arg3: 0000000000000500, DPC time of bids (ticks).
  Arg4: 0000000000000000

  Bug check 0 x 133 DPC_WATCHDOG_VIOLATION.

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/jj154556 (v = vs. 85) .aspx

  Resolution error blue screen in Windows.

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Unfortunately, this crash dump failed to identify the driver responsible. Run the Verifier (DV) according to the instructions in the link below.

  Note: Be sure to read and remember the steps to reset the DV in a collision. Please download the Minidump generated recently to your onedrive and share the link here.

  Driver Verifier - stalking a bad driver to behave. Created by ZigZag3143, Co.authored by JMH3143
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/driver-verifier-tracking-down-a-mis-behaving/f5cb4faf-556b-4B6D-95b3-c48669e4c983