Dpc_watchdogs_violation help, which driver might be causing it?

Similar Questions

• DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033). I'm not able to determine which driver is causing the problem

  I get a blue screen everytime I reboot my laptop.  I run Win Vista. The error I get is DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS, STOP: 0X000000CB (0 X 82478022, 0X93211B98, 0X870C7DED, 0 X 00000033).  I am not able to know which driver is causing this problem, please help.  Thank you

  In addition, it can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• should which driver I download? Help me

  Hello

  probook HP 4540 s base model

  my product number: A5S82AV

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  should which driver I download?

  me the direct download link.

  Thank you

  Hi 14saba14

  MediaTek (Ralink) 802.11 b/g/n wireless network (WLAN) card

  Windows 7/8 (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66089.exe

  8.1 for Windows (32/64-bit)

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63302.exe

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• My Mac has crashed. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Suite?

  I bought my Macbook Pro 17 (it's a Mid-2009, running Cougar 10.8.4) used on eBay, and it came with Adobe Master Suite CS5. I pursued a degree in graphic design, and the computer had everything that I needed to start. Now that I'm out of College, I rely heavily on InDesign and Photoshop to get the job done. However, after five years of loyal service without problem, my Mac has crashed and I have never used time Machine. I might have to reinstall Mountain Lion or replace the hard drive. Reinstalling my operating system or hard drive replacement will cause me to lose my Adobe Master Collection of applications? I can save them somehow?

  Any reply and help would be greatly appreciated.

  Thank you for your time.

  Caleb P.

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  -page includes links to the programs to find a serial number installed on Mac or Windows

• which driver to download for my hp probook 430 g1?

  which driver for wireless download for my hp probook 430 g1? in support, there are a lot of what I can download?

  I have a mediatek mt7630e

  Hello

  Yes, you are right, you said. I'm sorry for the lack.

  I see that there are two versions of the driver that can be used for your card Mediatek and it's the most recent:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5379212 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_122653_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  MediaTek and Ralink companies are now one after their merger.

  Please support me by clicking on the star of congratulations, if you like my post and "Accept as Solution" if my advice were answered or helped your situation. What are the best ways in which you can thank me.

  I am an employee of HP.

• Satellite C660d-102 Wlan does not appear in Device Manager - which driver?

  My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
  Which driver should be used to solve the problem?

  I am using Windows 7 64 bit on it...
  Tried my level best to install the wifi adapter...

  Please help: (...)

  Hello

  Laptop seems to support the Realtek RTL8188CE WLan card.
  You have the Realtek Wlan driver that you can download here.
  http://APS2.toshiba-tro.de/WLAN/

• Which driver should be used to connect HP 34401 using RS 232

  Hello

  I'm using labview for the first time. I want to use the RS 232 cable to connect between Labview and HP 34401 multimeter. Which driver should be used for this purpose? Help, please.

  Thanks in advance!

  A search for the HP 34401A on the Instrument Driver Network reveals this page, which should have what you need. If you're using LabVIEW, you will want one of the first two projects.
  
  
  Also, for future reference, this board is for NI DMMs. For future instrument driver assistance, you will receive more timely and expert information on NI's Instrument Control forum.
  
  
  Please let us know if you require any further assistance.
  
  
  Thank you,
  
  
  Tobias
  Software Engineer
  Precision DC/Modular Instruments
  National Instruments
  

• We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this. .

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this

  My pc does not have a hard drive. I can't restart in any mode.

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  · What options have tried advanced startup options?

  Remove all external devices such as printers and scanners connected to the computer and then try to start.

  As you mentioned you don't have a CD/DVD drive on the computer and you are not able to boot in any mode, there are only two options:

  a. you will need to connect external CD/DVD drive to the computer for further troubleshooting.

  b. you must contact the manufacturer of the computer.

• Should which driver I install adobe flash

  When trying to install adobe flash, there is a yellow question mark. I take this to mean that the hardware is installed, BUT windows cannot find

  a driver for it. How can I check to see which driver I need?

  Hello

  This can help you:

  Flash Player can get damaged.

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• Determine which drive is alert (infrastructure cartridge)

  Hello

  We use the cartridge of the Infrastructure to draw attention to the capability file Foglight. For the moment is the alert that we see:

  WARNING: SERVERNAME: disk high capacity use 91.00%

  Reported to Jan 01 00:00:00 BST 2012

  What we would like to add to this alert, it is which drive is causing the alert.

  Is this possible?

  Thanks in advance

  Hi Ewan,

  Yes, it is possible. The ability to file rule should probably include the disc name in the alert message as it does in the dashboard of the alarms and the alarm detail view.

  But since it isn't in the current version, you can easily make changes to include this information.

  Since he is an out-of-the-box rule, the best practice is to copy this rule, use a naming convention in the copied rule and modifed and disable the out-of-the-box rule.

  You can make these changes from the dashboard of the rule management.

  Once you have copied the file system of the cartridge of the Infrastructure capacity rule and disabled the original, modify the copied rule and add the Variable rule "diskName" as shown in this screenshot.

  

  Then go to the caution of the rule condition and change the 'Matière2' variable in the Variables of severity level to include '@diskName ':

  

  Repeat this process for the other severities of rule and you should be good to go.

  When I tested this change, I got an alarm like this message:

  From: [email protected] [mailto:[email protected]] Sent: Thursday, October 04, 2012 10:14 AMTo: Brian WheeldonSubject: agent99 : Warning: High Disk Capacity Utilization on /agent991 (/dev/vg00/lvol4): 90.93%
  
  Warning: agent99 : High Disk Capacity Utilization 90.93% Reported at Thu Oct 04 10:14:19 EDT 2012. Please use the following URL to obtain alarm details. http://myfmshost:8080/console/task/showAlarm?alarmId=/alarms/9aa60450-37f4-48b1-81fa-cfddc5a9d609
  

  Kind regards

  Brian Wheeldon

• which driver atheros ar8121/ar8113/ar8114 pci-e ethernet controller I need for windows 7?

  I'm trying to upgrade to Windows 7, and the Upgrade Advisor tells me that I need to download the Win7 driver first; the thing is that when I go to the website of Atheros, they have all kinds of drivers available, but I can't find a single to their subject description, so I know not which driver I need.

  Please help :)

  You know, you're right. I was involuntarily about as vague as Microsoft or Atheros. But I advanced and ignored the warning, upgrade to Windows 7, and you know what, the drivers worked fine. It turns out that I have has no need to do anything.

  Thanks for your help, however.

  ~ Aaron

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• Which driver Apple opens the door to disc in Windows 10?

  Which driver Apple opens the door to disc in Windows 10?  I have a Mac Pro 64 bit and updated since Windows 8.1 for Windows 10.  I've updated the Boot Camp Assistant support files and the door does not open.  I do not use the player a lot more, but it would be a pain to have to start on Mac, open the drive and Windows to use a boot disk. The F keys seem to work in Word.  Software update in Windows can find nothing more.  I could try to fix the driver if I knew that one...

  You are asking questions on the eject button and eject the optical discs? Can you put a picture of the specific training you are interested in?

• HP ENVY 17-j005tx Notebook PC: network card wireless Intel N 2230 sporadic but recurrent connection Wi Fi problems. Which driver to use?

  I have an old HP Envy computer of 12 months with a 2230 Intel® Centrino® wireless-N wireless adapter.

  In the last 6 months, the PC has suffered sporadic but recurrent problems of WiFi connection with the failure of the connection or drop-outs. The PC connects to the router, but fails to obtain or maintain an IP address. It has been with Intel driver version 15.12.0.6, pilot day February 25, 2014, installed by Windows Update, on June 16, 2014.

  When I contacted HP support on January 9, 2015, I have been instructed to download the software from the HP Web site. This driver has an HP publication date of 1 November 2013 and installed the driver version 15.10.0.12 with a release date of June 25, 2013.

  Updated Windows ran later that day there and I wanted to install the drivers updated Windows 8.1

  • Important update - update the Intel driver for Intel® Centrino® wireless-N 2230 published on 17/10/2013, 2.4 MB
  • Optional update - update the Intel driver for Intel® Centrino® wireless-N 2230 published 07/10/2014, 101.9 MB

  If Windows Update has been set to automatic the provided HP driver would likely have immediately deleted by Microsoft update.

  The Intel Web site offers the 15.14.0.1 or 15.14.0.2 driver version as the last driver for the adapter N-2230 but Intel "recommends obtain you and use the software provided by the manufacturer of your laptop. (even if it's more than a year to date)

  It's very complicated to have the latest version on the Intel site, older versions installed by Microsoft Update and even older versions on the HP website.

  If the user must install the OEM version, how the user to treat Microsoft Update overwriting the OEM version?

  Which driver should be used?

  Why didn't the driver software HP Support was updated to resolve known issues with this wireless card driver?

  HP would provide only a pilot who has been tested on the device that is installed on a particular type of material.

  Intel would release the driver first, but then it would take some time for HP to the test pilot and release it to the public for use on their units. Some customizations can apply in order to get the driver to work on the material.