Drag between the problem of trees

Similar Questions

• See link and navigate between the problem of pages...

  Hello world! Hope someone can help with my problem. DB, I have a table with information on employees and employment. This one table I did an OS where I did 2 VO - EmployeeVO and JobsVO. I connect these two VO with ViewLink - EmpJobVL (realtionship 1 to 1).
  
  Then I created 2 .jspx pages. In a page I droped EmployeeVO but on the second page I droped JobsVO. I put the button with which I can navigate between these two pages in the page template.
  
  The problem is when I start my employee page and navigate to the correct folder with the 'next' button and then try to navigate to the jobs page and then in the jobs page I can't see correct record. I still see everything first save. Why this is so and what can do?
  
  Hope that someone help me,
  
  Best regards, Debuger!

  Hi Debuger,

  No probs, you can keep your Jspx so u just have to clean your PageDefs... More fight urself its such an easy task...
  Remove all entries def of your page and then have a copy of your jspx coding in a notebook that also remove...
  Drag your def jspx and page a new re-make your your and paste your new jspx encodings
  your your get binded automatically... :)

  Kind regards
  Suganth.G

• Disabling drag between the articles

  Hello.

  I'm a portfolio design in InDesign as an iPad application.

  There are 3 pages where the spectator glides (introduction to the company) until they get to the 4th page (article), which is the central/main menu navigation page, which values net asset of all articles (via the navto command). However, I don't want viewers to swipe more beyond this point - I use the return home navigation rather that slip through articles 50 or so are not in order any beneficial. Is it possible to disable drag it horizontally beyond article 3, or at all? There are a few articles with multiple pages so I need viewers to slide vertically between the pages.

  Thanks in advance

  Steve

  You could put a State two full-page MSO with no content on it value

  swipe to change the slides and loop.

  That would be effective kill the ability to swipe, but you would not be able

  to go back, either.

  Bob

• The scale and the relationship between the problem of points

  I had a few problems with setting the scale of the objects and their appearance before and after the scaling.

  The relationship between the points change when I change things, and it's a little embarrassing.

  Before that I put across that circle with an arrow, it looked like this:

  

  Then after that I put across it, the lines on the arrow were not in place:

  

  It happens very often when I am scaling of paths in illustrator. Is there something I can do to prevent it? Often I make things evolve upwards or downwards and it is a little painful when I know I'm going to screw up the path.

  

  

  Go to the drop down at the top right of the Panel processing and disable "Align new objects to the pixel grid."

  Edit: If you select 'Web' in the new Document dialog box, "Align new objects of pixel grid" is enabled by default, at the bottom of the box. You can choose to disable it there before OK-ing the creation of the document.

• Drag / drop the problem

  Hiya-

  Im still new to Flash and some need urgent help (photo attached).

  It will probably seem like a fundamental problem in a Flash guru, but if anyone has the answer I would appreciate it greatly as Im stumped!

  I have an image that has been converted into a MC and is on frame 1. On the image of MC, I placed the following basic code:

  {We (Press)}

  startDrag (this);

  }

  {We (Release)}

  stopDrag();

  }

  I also put 1 framework to stop.

  Right, so that WORKS perfectly well. But the problem is that I have a MC in the corner of this image of MC (and it serves mainly 'zoom' button ') and opens another series of images if clicked, but I can't seem to get this new MC' actionscript to work AND "drag and drop" with the MC underneath. I only seem to be able to get the MC (zoom button) to operate if its on its own.

  How can I get a MC with actionscript to work on top another MC? And drag and drop both together in their corresponding exact position?

  Help appreciated!

  B

  The purpose of the code on my button was simply to demonstrate that the button still works all sharing the room with the mc who has the code drag are entrusted to him.

  If you have converted the container of a graphic symbol, then you have removed any feature that she could have as a movieclip.  Graphic symbols have essentially no life, they are simple occupants of space that cannot be controlled with actionscript (they have no identity instance).

  I watched the modified version, you did and it works for what you tell it to do.  You probably do not realize just what you said to do.  The button is tell the movieclip it sits in of gotoAndPlay (2)..., but didn't the movieclip in which he sits a frame 2.  In addition I don't really know what you're trying to do.

  I see that you added another frame in the main timeline, so if that's where you meant in terms to go to box 2, then for the button, you will need to either use...

  on (release) {}
  _parent.gotoAndPlay (2);
  }

  OR

  on (release) {}
  _root.gotoAndPlay (2);
  }

• Between the problem of dates

  Hello world

  We try to get a SQL sentence for our data model, and we have 2 parameters of date as "MM-dd-yyyy".

  When we put them inside our SQL query, we saw that it needed the date as "MM-dd-yyyy HH24:mi:ss", and the HH24 Gets the value of a ' 11:00 ", so if I have a record in 11:10, or one in 10:50, it is filtered differently for the same day, depending on whether we use it in the parameter 'Start Date' or in the parameter 'End Date'.". "

  The filter in our query is like:

  'TIME' BETWEEN (: STARTDATE) AND (: ENDDATE)

  Can someone explain to me how this works exactly? because I need to get all day in the filter and is not only the half hours.

  Thank you.

  Simple thing is cast to date and use, simply go by date without taking account of the time.

• I made a mobile site. No support for dragging between the Muse

  In this State there is no possibility. How do underside, use the arrows to change the page, do the drag that is common in mobile sites?

  See my website www.imagensecores.com.br which itself leads to mobile

  I answered your previous post.

  Thank you

  Sanjit

• Question about left right dragging between the articles

  (I'm new to Adobe DPS, so I apologize in advance if this question makes me look like a complete beginner)

  I'm working on a folio with two articles. I want the second article to be accessible only when the user clicks a button on a page which will link to the second article. I got the button functionality to work, but now no matter what the user is on the page, when they shift to the left the second article is displayed. Is there a way to avoid this?

  Also I build it in CS6 to work on a Tablet (a Samsung Galaxy), if that makes a difference.

  There is no way supported to block slide them between articles.

  Neil

• Network problem between the machines Win XP and Win 7

  I have 2 machines, a desktop and a laptop.  The office is currently running Windows 7 Pro (installed on 2010-01-01) and the laptop is running Win XP Pro.

  The desktop (Win 7) can see the laptop (XP) on the network and can access the shared folders.

  However, the reverse is not true.  The laptop can detect the office as a computer on the network.  I can double click the icon and see the files of office that are shared.  But when I try to access the content of the files, I get a message that says I don't have permissions and contact the system administrator.

  I also have a problem with the shared printer (connected to desktop Win 7).  Before the upgrade both machines can print, after the upgrade, the laptop (Win XP) stopped printing.  I installed the XP drivers for the printer (using the functionality of additional drivers) on Win 7, deleted the printer on the XP computer connection and he still added.  The XP machine was able to find the printer on the network, but when I try to print, I get an arror message saying that "(l'imprimante peut être désactivé, pas branché ou les pilotes ne sont pas installés)."

  I think that the two problems are related, but I can't understand where is the problem.  Print and file sharing is 'on' on both computers, the firewall is configured to allow printing the file and shares, folders are set to 'share', with "everyone" under permissions and both machines have the same network name.

  Any ideas? Am I missing something?  Is it possible to reset all default values so I can set up the network again from scratch?

  Thanks in advance a lot.

  Probably, you have a misconfigured firewall and/or do not have matching accounts/passwords user on both machines.
  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  The problem is that I can't remember the arrangement of the original tree of my photo folders when I r

  I have a problem of my catalogs of PES 10 displacement and the photos attached from my old computer with Windows XP on my new computer with Windows 10.  How can I keep my original photo folders tree arrangement when I restore backups of catalog on the new machine?

  The problem arises because Windows 10 is equipped with a new tree structure with new names for many of its branches.  Tree of Windows XP starts to Local Disk (C), and then does the following: Documents and settings, Susan [it's me the user], My Documents, SusanPhotos (the folder that I created that contains my photos) and then several subfolders and subfolders with my photos grouped by theme, for example the Puglia Italy and Italy-Roma.  My new computer Windows 10 has a different tree and different names for a large number of branches from early on: OS (C) [instead of Local Disk (C)], users, Susan, Documents [instead of the old My Documents], SusanPhotos [what I created] and then the subfolders and so on.

  Because of the new tree and the new names of the branch, I can't find a way to restore my PES 10 catalogues and photos attached to them to where I want to that they.  What I want to do is put the files from SusanPhotos to the Windows 10 Documents folder so that I find myself with the following tree, essentially the same as what I had on my old machine: OS (C), users, Documents, Susan, SusanPhotos, then the original subfolders with my photos.  Apparently 10 PSE does not allow me to move folders of photos in the Organizer, so that the pictures stay connected.

  PES 10 offers 3 options for restoration: Original, personalized and customized, keeping the original structure of the file.  Here's what happens to each:

  (1) original creates new folders with the old names and the structure of the tree, parallel to the tree Windows 10 has instead of inside the tree Windows 10.

  (2) custom with the original structure of the file is the restaurant where I want (within the SusanPhotos) but retains all branches superfluous-instant initial tree of Windows XP, production: BONES (C), users, Documents, Susan, SusanPhotos, Documents and settings [carried over from the old computer], Susan, My Documents, SusanPhotos, Roma-Italy and Italy-Puglia and so on.

  (3) custom (without checking the original file structure box) makes every SusanPhotos but without any organization: OS (C),..., SusanPhotos, Italy-Puglia and Italy-Roma and all other folders at the same level instead of in their original nested groups with subfolders.

  The first two methods you end up with a tree that is chaotic with two parallel trunks or a single trunk but with several redundant layers carried over from the old computer.  The third ends with no tree at all.

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.  With thousands of photos in hundreds of cases, the time required for the movement of individual pictures is prohibitive.  PSE10 allows me to move the catalog folder, but apparently not the folders containing the photos.

  The result is that at this time I have no solution to my problem.  Can you help me find a way to restore my photos while keeping their original organization?

  One solution would be to make a Custom Restore with the original structure of the file and then use PSE10 to move the folders that I would like.  However, AFAIK, PSE10 I cannot move entire folders of photos, only of individual pictures.

  You simply use the 'Files' Panel on the left. Your folder tree appears. Simply, you drag and drop the folder to move with all its subfolders in the desired master file. That works exactly as in Solution Explorer, so be patient, you receive no message of progress until it is completed.

  You did a good job to understand the situation. I think that might help you is to understand that changes in the way default folders are created in a different version of Windows can be ignored if you do not use these structure 'default', from the shortcuts to your main folder of the user.

  I create a master folder 'My Photos' directly under the C: root.

  When I restore, I use the "custom" choice, as you have discovered, I only specify this folder in the restore process, and I completely ignore the default shortcuts to 'Documents' or 'Image '.

• Wonder about the difference between the element and symbol with draggable drag

  I'm trying to understand the difference between a symbol and a with draggable element.

  She is the example I did: https://www.box.com/s/v2s8ueeqof9litu4zvwm

  • for the Rectangle element, drag works very well. The item dragged from where he is.
  • the symbol of the box which is initially 0 left and top 0, no problem
  • the symbol of the boxCopy which is placed on the left 100 and top 100, on the trail, he jumps to this amount.

  I guess drag Gets the original position of the symbol on the stage box and add these numbers to the position of the step. I have the symbol arround medication and it seems that the scene is translated left and top of the amount of the left and top of the symbol.

  This does not happen with the Rectangle element.

  Obviously there is something I don't understand.

  Ok. Joel gave me the solution.

  After you have placed your symbols on the stage, remove the left and top lines in the symbol. This will reset to (0,0).

  Here is the corrected file. In the left panel, you will see that there is no left and top except one to show the difference.

  https://www.box.com/s/v2s8ueeqof9litu4zvwm

  

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• Problems with the transmission of data between the screws

  Hi all.

  I have a question where my program slows considerably during the race.

  The program is a producer-consumer, where I have the main consumer loops and loops producer for USE comms, measure the output power, input for measuring the power, thermal control, etc..

  Regarding the issue, the measures of output loop takes readings and transmits the data to a separate VI which remains running (measure of output processor). This VI summarizes and on average the data and also displays data for the operator to see details if necessary. The operator shows and hides the front panel of this VI with a button on the main program. This VI also returns the summary data to the main VI, where it is read by my loop of consumer.

  The main measures output VI loop takes about 200mS to run when the program is first started. Less than a minute, it is 400 MS, and it's all downhill from there.

  I've isolated the problem to the way I pass data back (I think). I couldn't find a way to pass the reference of the queue between two screws not connected by wires. I open a reference to the VI processor and use Ctrl Val.Set and Get to pass the data back. If I take the intersection of the Subvi data, there is no slowdown.

  My questions are:

  (1) why the data passing by invoking a node of the control on the target would cause the downturn?

  (2) how would I get/pass information of queue between the two screws are not connected?

  (3) Alternately, could I start the VI processor in my main program, run and pass data in and out of it? I want to keep it running, because it is also part of the user interface.

  I don't know that I have not explained this very clearly. I took some screenshots of my code, but don't see how to download here.

  Thanks in advance,

  Jim

  
  

• How to increase line spacing between the tree of elements in a modern tree control

  I have a VI where I used a tree of modern pallate control, that I need to increase the space between the elements of the tree. and should be retained, even if I have to add or remove items from the tree

  PS: Property "AutoRowHt" doesn't seem to help here

  Unfortunately, I didn't have time to play with or not this propgates of new entries created in the control tree programmatically, but if not, you could always just to revive this section of code (or specify the specific line because you'll know that the index of the inserted item).

  

  Specification-2 in the number of line property will specify that the change should be made for all rows in the tree.