Drag n Drop works but is not accessible

Similar Questions

• DownThemAll is installed but is not accessible

  I installed the add-on Downthemall, but is not accessible. I mean that, although Downthemall appears in the list of Extensions installed and active, there is no other evidence of its existence - for example, no button or right click on the menu. (I am a user of long date Downthemall (on another machine), so I have some experience with the program.) Also, when I click on Downthemall preferences in the Extensions list, nothing happens.

  I'm on a Macbook Pro 15 "screen Retina running 10.8.4 Mountain Lion and Firefox 23.0.1.

  Thanks for your suggestions on how to solve this problem.

  I found the problem. I disabled the module additional own links and menus of the DtA appeared. DtA works fine now.

• Options expenses, but are not accessible. Unusual small box described in the Center. Win 10 64 istalled operating system. Have you tried disableing extensions.

  Loads Options page but are not accessible. Small box (without text) appears in the middle of the page. Have you tried various installs Firefox (current edition of Foxstart). Tried to disable extensions. Win 10 64 operating system. Chrome is by default because it can not reset Firefox because of issue of Options.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• own original iPod, USB-Firewire used cable, works but will not go up in iTunes.

  I own the original iPod. used USB to firewire cable. A big mistake. now, it works but will not mount on iTunes. tried reset-no good version 1.5 OS

  I don't think there is such a thing as a USB-to-FireWire, not a single cable that actually works.  USB and FireWire are very different, including the power voltage which is used to load.

  So you're saying that he is no longer connects to iTunes, even when you use a FireWire cable and connect to a FireWire port?  Still, he does pay when you connect it to your FireWire adapter?

• Drag and Drop works is not in Windows 7

  I have a new problem that has arisen in the last week or two. I can no longer drag and drop my files and folders in Windows Explorer. I have Windows 7 on a HP laptop. It is installed on the computer in last December when I bought (09). I've never had a problem with it since then, and I do not know how to find settings to allow drag and drop or re - activate. I know that I've done before on this machine, several times - and just noticed first in Thunderbird, (my e-mail desktop application), then in Solution Explorer. I recently installed the SP1 (spelling?) a few weeks ago and have installed a few other programs of odds and ends, but I'm sure that drag and drop was working fine until a few days ago.

  Any help would be appreciated. As a writer of genealogy is a must have feature.
  Thank you.

  This happened to me yesterday.

  In Windows Explorer, click a file with the left mouse button and hold down the key. Then press the ESC key. Drag-and - déposer is miraculously revived.

  I think that just by pressing escape works too, but I'm more able to test this. I got this http://it.thelibrarie.com/weblog/2010/06/drag-and-drop-stops-working/

  I can't be bothered reading all to see if this has been mentioned.  The fix for the escape has worked for me with Win 7.  The only thing I have that is unique with respect to colleagues is a wireless keyboard and mouse.  I hope that this has something to do with my problem.

  Thank you Brigitte!

• Captivate 9 Drag and Drop DropIncorrect State does not

  Hello!

  I ve done a Drag and Drop interaction, where I have 4 targets and 4 drag only one correct answer for each of the sources. I've added States for Drop targets:

  DropCorrect State, The target turns Green when pressing submit, and the answer is correct.

  DropIncorrect State, target Drop becomes Red when press submit and answer is incorrect.

  I thought that it would be a good way to show the user which targets Drop are correct and which aims to drop they must change to get the right answer.

  When the answer is correct, Drop targets turns green and I made an action that says "OK, click anywhere to continue."

  BUT when the answer is wrong, nothing happens to the colors of the Drop target. It s just a failed, Try Again message. Nothing more.

  Why isn´t the State DropIncorrect showing when I press the submit button and the answer is incorrect?

  I just checked the file of this article, which was created on an earlier version of 9 and it works well also for the State of DropInCorrect, but I have only 1 attempt! I suspect that your endless attempts are the cause of the DropIncorrect does not. Compare it with actions on a question slide: success action will be performed when the answer is correct, but the other action will be done only at the last attempt is finished and the answer is wrong. Since you have endless attempts, this last attempt event never occurs.

  Sorry for the late reply, wanted to check a second time and has been very busy today.

• Air drop works quite simply not-go back to Hello or email!

  Air drop does not work, but APPLE does not update their system

  Look at that stupid thing again on the Web site

  • If the receiver Mac is a 2012 model or, click "Don't see you looking?" in the drop window or the sharing of the sending of the Mac spreadsheet. Then click on "Search for an older Mac."

  There is no such 'SEARCH for a FORMER MAC'

  the LIE of ¥!

  It's like I go back...

  iMac doesn't even see my iPhone and iPad... I've updated this CAPTAIN EL... but this isn't MY CAPTAIN... it's LOST in SPACE...

  STEVE? Please resurrect you... come back and launch these * holes who are ruin and confuse everything with products that don't work and take back...

  It's like every six months... the landscape come blow immediately with a noisy gas blower and say you "EASTERN GRASS GREEN!"

  but you realize there is no grass... because you have a cement way walk!

  APPLE you have changed from FCP to a ROAD BLOCK

  you're HELLO DELAYED...

  and you AIR DROP in SYRIA... that's what you do... nothing absolute...

  unnecessary garbage must be taken on the software if it does not work... I have screenshots to prove... but have you fine fine fine subtleties that says:

  Oops it works on a NEW as yesterday Mac... Sorry...

  Writing an effective question of communities of Apple Support

• "Cannot access working group on some computers running XP - ' < name of working group > is not accessible. You might not have permission to use this network resource ".

  I have a home with 4 PC network - one of them is running Windows 7 Home Premium (with homegroup disabled) and others running XP Pro.  The XP machines is called 'Server' and the server and the computer services browser running and set to automatic.  Two other computers, called "Notebook" and "Dell", as well as the machine Windows 7 have no file and sharing printers enabled and have specifically the Server service is disabled.

  My problem is that one of the two XP client machines cannot access the working group.  Let me be clear about this: I open Windows Explorer and click on "My network places"-> "entire network"-> "Microsoft Windows network", there is then a second 5-10 break and then my workgroup name is displayed.  When I click on the name of the Working Group, there is another ~ 10 second pause and then I get a message that says error " is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have permissions.  A device attached to the system does not work. ', where is the name of my group to work for other days, after some of the computers are restarted, I find that the XP client has absolutely no problem with that; but the other now has this same problem.  In other words, the problem going on between two XP clients.

  Let's analyze: I have Windows on all PC firewall and any other firewall program.  I tried to disable the Windows Firewall and my anti-virus (temporarily), program without effect.  This may not be a problem with the way I've set up my actions because the error occurs when I try to click on the task force rather than a shared resource.  This cannot be a problem with a specific XP client because at different times, each of the two PCs worked perfectly without any changes of configuration made between the two.  It could be a problem with the server settings; but I don't see what it could be.  I tried editing

  HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters and changing

  IRPStackSize from 21 to 45, then 50.  I also tried to change the size of 2 to 3.  I restarted the server and the client XP and had no effect.

  I don't have the same account of user configured on all three machines.  However, this cannot be the issue because the problem occurs when I click on the task force, before the server name is still displayed.  In addition, each of these two XP clients have connected with their existing user accounts at times.

  I tried the Wizzard of configuration network running on all four machines, without effect.  I tried a lot of things, most of which I can't remember.  I'm at the end of my mind.  Help, please.

  JW,

  Thanks for the continued support.

  By the advice of IPCONFIG, I looked at the registry for all computers and found EnableProxy wasn't there.  According to the documentation by default to 0, which is what we want.  However, I added it to all the computers and left it set to 0 and restarted the computer.  The node Type still said 'unknown '.

  Thanks for the info on the master browser.

  The ""Network location cannot be reached"when you access actions."
  the article talks about Windows 2003 Server and none of the symptoms mentioned relate to this situation.

  The "network adapter advanced troubleshooting for Windows workstations" is on hardware troubleshooting.  I think that it's probably not a problem because the computer has no trouble to access the internet, which is not possible if the card network are not working.

  I went through the AutoCorrect entry to reset the TCP/IP stack, even if the article describes symptoms such as difficulty to access the internet...  And...  THIS MARKET!

  After re-booting, the PC that was in trouble can now access the working group.  All other PCs can always too (have not tried to restart all over again).  AWESOME!  I can't thank you enough!

  I re-post if the syptoms happen; but for now, we can consider this issue RESOLVED.

  Thank you 1 million,

  Adam

• BEFSR41 appears in ipconfig, but are not accessible

  Hello.

  Problem is described in the title. Just bought this new linksys router after reset my netgear router whenever I used a p2p program cause I've heard of linksys is "better". Now what? The configuration is very strange alrdy and it won't work at all.

  Have a SmartBox of T - Com, this router and a DSL Modem from Arcor. Before that everything works perfectly with Auto IP.

  Now my PC (2) is connected to the router and all two get their own IP address and the router appears as gateway 192.168.1.1, but it is not accessible, with this configuration on the CD for beginners, nor with the mask of browser.

  However, if I use the CD and it seems to scan my system, a bad LAN connection symbol will blink in the taskbar.

  It seems that the router is not completely broken, LEDs do not show anything out of use as well, but something is wrong.

  Any ideas?

  PS: I know there are tons of similar problems in this forum, but I have not found any case solved...

  O.K. Your modem assigns IP addresses inside 192.168.1. *. In addition, you have a PPPoE connection. I assumed that the modem is a modem/router device hybrid is smart enough to do a crossfeed PPPoE if you do a PPPoE connection.

  Otherwise, it could also be that your modem also has a USB port through which you establish a direct PPPoE connection. If your modem has a USB port not in use. If you want to use the ethernet port on the modem to make sure that nothing is connected to the USB port on the modem.

  I suggest that you test the following:

  1. disconnect the BEF of other devices. The son of a single computer to the BEF.

  2. open http://192.168.1.1/ and change address local IP of 192.168.1.1 to 192.168.2.1.

  3. on the same page change auto/DHCP internet connection for PPPoE settings. Enter your user name and password needed.

  4. now save the settings. You will lose the connection. The router reboots with the new IP 192.168.2.1. Open a command prompt window and type "ipconfig/release *" followed by "ipconfig / renew *" or restart the computer. The computer now get an IP 192.168.2.100.

  5. open the web interface of the router on the new address http://192.168.2.1/

  6. now wire the ethernet port of the modem to the internet port of waiting for a while. Click the router status page and check whether it connects or not. If it does not connect and see if it changes anything, or if you get an error message, press the button connect.

  If it connects, and you see an IP as the 89.*. *. * you saw in the ipconfig/all command in your last message, then you must have an internet connection now.

  7 if it does not and you do not get an IP address on the internet connection, try changing the type of internet connection to DHCP/auto on the main configuration tab. Save the settings. Return to the status page and check if you get a 192.168.1. * IP address as the internet IP address. If you get this IP address, check if your internet connection is working now or not.

• Drag N Drop table lines do not move a table to another Table

  Hello

  I use 11.1.7 to develop the drag N drop rows in one table to another

  1. I create a table in the schema hr as a student (sName, brands, sId, grade) & inserting values.

  2. I create EO & three your based on Student table... only three your from wise rank as (GroupAVO, GroupBVO, GroupCVO)

  3. I create page & panelgridLayout (3 columns, 1 row), I drop these three instances of VO tabular...

  4 drag the component Source and Drop target in these 3 tables...

  Run the page... page contains perfectly with the wise group of 3 tables...

  but when I drag a line a table to another table, lines do not move...

  I check my DB too... changes there too...

  No error and exceptions in my journal...

  What is the problem? Can someone help me?

  See also - Ashish Awasthi (Jdev/ADF) Blog: adding Drag and Drop functionality for collections in the fragments of the page to create insert

  Thank you

• How to add a code so my drag and drop movie clip will not stick when he's slipped to o final place

  Hello everyone and kglad, I have to use the old drag and drop code on my video clips, but the problem is when I drag the movieclip to the area on my .swf file as soon as I release it, it sticks to the author of the hand.

  I am encloseing I am using the action script could someone or kglad tell me what is missing in the code so that once he is out it does not stick, see the code below

  circle.onPress = function() {}
  startDrag (this);
  }
  circle.onRelease = function() {}
  stopDrag();
  }

  I am desperate for help on that must get ready for this afternoon

  Seal55

  the following is preferred:

  Circle1.onPress = function() {}

  this.startDrag ();

  }

  Circle1.onRelease = circle1.onReleaseOutside = function() {}

  this.stopDrag ();

  }

• Drag and drop inside SWFLoader does not

  I have a Flex application that loads a high Flex application via SWFLoader. The secondary application uses drag-and-drop operations to rearrange items, delete them etc.  The secondary application works perfectly when it runs by itself (for example, not "incorporated" via SWFLoader in the main application).

  Once I have load in the main application using a SWFLoader operations drag - move no longer work correctly. All other events seems to work very well. It is only drag and drop that don't always work right.

  Y at - it something that I'm missing that would cause this issue? I think there may be a property that I need to put on the SWFLoader. I hope someone can help.

  You could maybe make a component, implemented as a module and load only for users who need to see it.

• My computer laptop monitor works, but does not have the windows desktop.

  original title: my laptop monitor works, but the windows on desktop are not displayed. The desktop appear correctly in safe mode but not in normal mode. Any suggestions?

  Running windows XP media center edition on an HP laptop. AMD Turion 64-bit dual core.

  Hi Prohoss,

  Follow the steps in this document to perform a System Restore. You will need to start safe mode to perform the steps.

• Windows open will not close and the computer does not except in safe mode. The mouse works, but can not open a file or a program.

  I ran the twice successfully system restore, but that did not help. When a window is blocked, hit CTRL-Alt-Del shows an error message "failure of Security Options. I use Vista. Open windows on the desktop were often not well closed for months, but now the computer freezes as soon as I opened the first window. Busy circle is present. Mouse still works but can't do anything for files, etc.

  Hello

  1. don't you make changes to your computer, after which the issue started?

  Follow these steps and check if the problem persists.

  Step 1:

  If it works in safe mode, I suggest that you can start your computer in a clean boot State and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  Step 2:

  You can perform disk cleanup to clean unwanted files on the computer.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• DVD works but will not play a CD - Vista

  I tried to remove the filters from the registry.  I have download all the drivers from Dell.  It used to work, but I haven't used in a while.  I put a DVD in the drive and it loads immediately.  For a while when I clicked on the drive, he asked for a CD.  However in the last couple, the icon changes as he sees a Cd in the drive but cannot read.  It shows 0 files it contains.  When I put a CD I had burned some time ago, it shows how much free space on it, but does not display the files it contains.  I tried music, games, and files.  Any ideas short of wiping the entire computer and start over?

  Hello

  DVD player & recorder and CD player & burner are really 4 separate devices in one case is not
  unusual for a work and not the other.

  Please do all the below in the order listed as it is often the complete process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.