Dreamweaver CS3 won't open - tried all of the solutions posted

Similar Questions

• HP 7520: HP 7520 - impossible to activate Web Services - tried all of the solutions only in the last forums

  There are so many messages on this error dating yeas.  I tried all.  He used to work without any problems.  I tried the changes DNS 8.8.8.8 and 8.8.4.4, I reset my routers hundred times.  I entered my IP address in my browser and tried in this way.  No matter what I tried my Services Web will not work.  I have reset the factory settings and reinstalled the software on my computer to make sure that what was allowed.  Any other tips or thoughts?  Y at - it a proxy address that I can try?

  Hello

  From your PC, download and install the latest firmware below:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

  Once done, restart your printer and try to access Web Services, tht sould restore its functionality.

  Kind regards

  Shlomi

• Photosmart D5160 randomly disconnects. All of the solutions posted, followed by new ideas?

  Basically, the printer continues to go randomly on and off line. Even when he is online, when I click on the button "print" of the computer, the printer then goes offline! Sometimes it - if you're lucky, but the times are very rare! The printer has not been damaged or something like that and this problem started just by itself. Seems a shame to dump the printer when it actually works.

  I use an iMac G4 PPC running OS 10.4.11. I searched the previous posts on this problem, but none have been resolved. I have followed the steps of troubleshooting HP, reinstalled the drivers, made the 'power brains' a few times, plugged the power directly on the wall (not a surge-protected power strip) and still nothing. I changed the USB and power cables, changed the USB port plugs on, in fact, I did everything suggested. I am quite fit to using a Mac so I've done everything I can think of, such as deleting the prefs etc.. I even tried to use it with my Macbook, and it does the same thing!

  Any suggestions?

  widgets10,

  If you have visited the steps described in this article , it may be time to service the printer (if it isn't give the steps a shot and let us know the result). You can contact technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.

  Good luck!

• InDesign CC 2015 resignations on opening - tried all of the usual suspects

  I had this problem before where InDesign closes immediately after opening. Before I wiped my system CC and cleaned the files using the 'Adobe Creative Cloud Cleaner Tool". This time I've trashed even manually my preferences as well. After 4 attempts without success and now my deadlines late

  Any ideas? See you soon.

  OK, so forget what I said about the permits, at least for now. There is a known CC 2015 with El Capitan bug that might be the problem. In El Capitan system preferences, turn off the auto-hide menu bar option.

• Cannot restore bookmarks. "Unable to process the backup file." I tried all of the solutions that I can find online.

  I am under W7 and 14.01 FF. My FF admin account works fine. My work account has problems. In the past I was able to get the bookmarks to return but not this time.

  The favorites were there yesterday morning and disappeared in the afternoon. Nothing has changed between the AM and PM to my knowledge. I tried every solution that I could find online but still no bookmarks.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can try to check and repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

  Also, make sure that the backup has the correct file extension (.json to restore a JSON backup).

• Windows 7 not resumed after Hibernation - tried all of the solutions out there

  I have a HP pavilion Dv6t laptop running Windows 7 Ultimate.

  -Intel i7 2670qm

  -8 GB ram

  -700 GB HARD DRIVE
  -AMD 7690mxt 1 GB graphics card

  The Windows is preinstalled with the laptop. This laptop has already had 4 primary partitions reserved by Windows and HP recovery disks.

  I need dual boot linux for development purposes, so I deleted one of the primary partitions. The partition that I deleted was the partition of 100 MB, I think, Windows uses to start and system for purposes of repair.

  After deleting the partition of 100 MB, I ran Windows repair and I started correctly in Windows. Then I installed Ubuntu and it starts very well as well. The boot loader is now the Ubuntu one, I don't assume the cause of the problem.

  Now comes the problem.

  When I put in hibernation in Windows, it hibernates correctly but using the Hibernate, I am presented with the message "Windows summary of Point of hibernation". I hit enter and Windows get stuck at Windows Startup logo. This can go for hours and hours remaining on the screen. I so force the shutdown of the laptop. Start the laptop I am presented with 2 options

  1. take out the point of hibernation

  2 remove the point of hibernation and continue to the start screen

  I select the option of delete will point and Windows starts but I lose all data saved with Hibernate.

  Please help me solve this problem! It comes to my work machine.

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to resume from hibernation.

  I will definitely help you with this.

  I suggest you go through the link below:

  Refer to the suggestion given by Naman R responded on December 23, 2011:

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/unable-to-resume-Windows-7-from-hibernation/dedc3a07-9c35-4C13-b96d-1cda877de449

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Can't see the other person, but they can see me. All of the solutions posted did not help.

  I don't see the other person when I Skype, but they can see me. The only thing I see in my screen is their profile picture and myself. How can I overcome this? I use windows 8.1 and a computer dell laptop.

  Have they turned on their webcam?

• When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas?

  When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas? I am running Vista and office 2007. I tried all the Windows solutions but nothing works

  Hello Stephen,

  You happen to have another system that you can try to download the fixit on and then moving on a USB? You can also try this fixit as well: http://support.microsoft.com/kb/971058

• After update Itunes 10 to WIN and Iphone 6 do not sync.  I tried most of the solutions I found in support.  Suggestions welcome.

  I am more able to synchronize Itunes using the USB between WIN 10 PC and Iphone 6.  I've never had a problem until I recently installed the latest updates of ITunes on my PC and the phone.     Win 10 Itunes version 12.3.3.17 Iphone IOS 9.3.1.  Sorry that I wasn't able to thin Iphone Itunes version however was informed after checking the updates that I was using more current.   I tried most of the solutions found under Apple support, including the abolition of the lockdown on my PC Itunes folder as recommended.  Hoping someone has a solution.  Very frustrating when something worked very well and no longer works after installing the latest updates.

  What happens when you try? The phone is no longer recognized by iTunes? If so, try the steps here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  original title: Solution Center?

  I think that the solution center is a part of HP.  I go to programs - run and type msconfig.  Click the Startup tab and look for Solution Center, then uncheck the box so that it will not start then click on apply and restart the computer

  Or
  You can put in the HP printer drive and re install the printer that can also work.  Hope this helps

• Photoshop CS3 won't open the image window

  Today I was scanning a jpg image in Photoshop CS3 and I received a message that Photoshop could not import due to a problem with the Clipboard data. (I can't rememer the exact message and I - currently - can't the message back to the top). The scanned image did save on my hard drive, so I opened it up with Painter X, where I worked with the image anyway.

  In any case, I thought it must be a problem of the PS don't import not new scans. However, I tried to open a PS file I had worked with and without open image window. (The picture shows in the navigation of the PS, but no real image file opens).

  I then tried to creat and open a 'new' PS file. Yet once, no the image window opens.

  For all purposes, PS seems to 'see' the image files, but it will not actually open (or visible) the image window.

  It's apparently a problem with Photoshop CS3 itself. I've never had a problem like this before, and I had scanned and opened an image in PS yesterday without any problem.

  I use Mac OS 10.4.11 on a Mac Pro with 3 GB of Ram.

  Anyone encountered this or heard of him? I appreciate any suggestions.

  Thank you.

  It looks like the window is open off screen or on your monitor second behind your panels.

  trash your prefs.

  It is covered in the FAQ if you don't know how.

• I can't open attachments Yahoo mail, but can in Internet Explorer. Tried all of the suggested fixes and nothing works.

  I tried all that on the previous thread for the same problem and I can not open attachments. I have no problem with attachments in Internet Explorer. It looks like a problem of FireFox for me.

  Whuch suggestions did you try? Here are two recent threads, I found:

  • Firefox 977835/questions/977835 used to download all attachments from yahoo, all other downloads work email
  • / issues/978924 Cannot open the pdf attachment in Yahoo Mail. Worked in 25.0 not 25.0.1. Still works with IE.

  Have you tried /questions/977835? page = 2 #answer-506091 (change the parameters of 'Complete' to 'Basic')?

  Are you accessing Yahoo Mail directly from https://mail.yahoo.com/ instead of via a bookmark? Edit: I see already suggested this and linked to another thread, philipp/issues/971042

• Since Firefox has been updated 16/01/2012 it won't open at all, I had to use for I.E, had to be able to contact to. Unacceptable and I really don't want to go through a complete uninstall and reinstall, so I'd rather use IE

  Firefox has been updated automatically on my system 15/01/2012, now it does'nt want to open at all, actually opens two tabs and just keep trying to open...

  https://support.Mozilla.com/en-us/KB/common-questions-after-updating-Firefox

• Dreamweaver CS5.5 cannot open most files outside the ~/Sites

  Recently, I've migrated to a MBP under Snow Leopard for a Lion running. CS5.5 has moved from the old machine to the new as well as all the files.

  Now when I try to open HTML files that are not in the folder hierarchy ~ / Sites, Dreamweaver usually fails to open. There are two General scenarios:

  1. No error is displayed if I right click and open with Dreamweaver;
  2. a "file not found" error if I try to open it from inside Dreamweaver by using the file > > Open or using the files pane in the Dreamweaver UI.

  Not all the files fail to open. Some old HTML files can be opened. However, it is not as simple as to open files that were created before the migration, and not after - most of the files that I'm unable to open have been created before the migration. (I am unable to open any created later).

  [Edit: risk cmd-s everything by tapping on the reflex - fill post now as a tool for editing.]

  What I've tried so far:

  • Repair permissions using the disk utility.
  • Check permissions to see if there's a different visible.
  • Reset the PRAM.
  • Delete the cache PCD [it was to solve a problem with Acrobat Pro out immediately at the start without error].
  • Relocation complete CS.

  Does anyone have any ideas or suggestions?

  I found the cause of this problem.

  On OS X, if any folder name in the directory path contains a vertical bar ("|"), Dreamweaver cannot open files at a lower level.

  This applies to at least CS3 and CS5.5 on Lion.

• 16.0.2 Firefox won't open You tube with the last Adobe Shockflash 11.4 etc.

  Forefox 16.0.2 on MAC OSX 10.8.2 with latest Adobe Shockwave Flash does not open You Tube videos. Photo of video shows, seems to load, but then nothing happens. I went through all of the suggestions on your site and spent a lot of time and still cannot find a solution. It's very maddening, as much as I love Firefox.

  I did as you suggested, Real Player update. But as fortune would have, incredibly this morning Adobe advised me automatically that they had a Flash Player update, I installed and everything works great now with you Tube. This bothers me a bit because I went to see if there was an update and said no, bt still here one is come. So sorry to bother you guys and just let say me your answers have been very helpful and responsive. Thank you. I had to use Safari for a few days and don't like it. Love my Firefox!