Dreamweaver ignorant CS6 not hidden folders and files on the sync, why?

Similar Questions

• How to pin folders and files to the taskbar?

  I have a few updates from XP to Windows 7.  How to pin folders and files to the taskbar?  I got a lot of these in my XP Quick Launch bar.

  Mike

  PIN Windows Explorer in the taskbar and you can right click to get your recently viewed files.

  You can also add toolbars to the taskbar.
  http://Windows.Microsoft.com/en-GB/Windows7/add-a-toolbar-to-the-taskbar

  A toolbar can be any folder in Windows Explorer. So you can put any selection of files to a user created folder and access these files quickly thanks to a simple icon in your taskbar.

  However, don't go overboard you can quickly run out of space on the taskbar. My toolbars are interspersed between the program pinned to the taskbar, tasks and links with the Noification area to the right. The section of the program will go to a second line below according to the needs and so you can limit the space allocated to programs if you wish.

• I have a laptop running XP pro with office 2003. All of a sudden all the folders and files in the folders have read only attribute applied.

  This make all folders on the computer and all the files stored inside. The individual files are not performed. If I remove read-only folders and files and click OK, reopen the file and the attribute has been applied.
  Any solution to this problem s.

  Dave

  It's not a problem... it is a feature.

  At a time in the past, Windows has decided that the read-only attribute means nothing, because it applies to files, so Microsoft 'solved' this bit to indicate to whom the file has been customized.  There are other methods available if you really don't want to do a write-protected file.  The details are explained in the following Microsoft KB article.  I recommend reading the article in full to understand what Microsoft did...

  "You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
      <>http://support.Microsoft.com/kb/326549 >

  HTH,
  JW

• Easy transfer Windows spilled all my folders and files in the C: OS drive.

  I don't know if I've done something right or if it is a real problem. I used my wired network and Windows Easy Transfer to transfer files and folders of old readers logics partioned 5 XP to my new family Win 7 Premium 64 bit, also with a hard drive partitioned. Transfer all the folders and files placed in the new Win 7 C: OS drive. What a nightmare! I had to return the computer to factory settings (out of the box) and all over again.

  I should have been smarter. After all, how a stupid machine knowledge where to put each logical drives and folders without receiving instructions. But then it should have been a warning that the machine is not do miracles.

  Caution: do not use Windows Easy Transfer if you have a partitioned hard drive.

  Hello

  Check out the link and send your comments.
  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1

• What folders and files contains the sites?

  I had to do a reinstall and lost my sites. I guess that there is a *. XML file or *. STE file which contains sites but can't seem to locate it. Someone knows how can I restore my sites?

  Dreamweaver CS5.5

  It's in your Windows registry.  If you export your STE previously, you will need to manually create new site definitions.

  Nancy O.

• I moved the LR5 files by dragging them to a new location. Why the LR5 keep folders and files on the source drive internal Mac?

  my 1 TB drive iMac is full.  I bought a LaCie 3 TB external and moved from 2012 to 2014 to the new drive records.  I did carefully by renaming in year-mo-date__topic in the records of LR.   Then, I used LR5 to drag files in front of the Mac the LaCie external HD.   Successfully, everything installs and turns and usable LR5 since the 3 TB LaCie drive.  The Mac HD is no longer displayed in LR.  In Solution Explorer, I still have folders 2012, 2013 and 2014, but it is still consuming most of my internal drive.

  Why LR5 did move all files instead of what seems to be the copy?

  LR5 instant:

  

  Snapshot of the Explorer:

  

  Hello, on a Mac, it's Finder rather than explore...

  On a Mac, there is no movement when the transfer between discs only copies. It is a large safety factor so that accidents can be overcome for example a power failure during the transfer.

  All you need to do (after saving two disks) is to move files on your internal drive to the trash and empty it then. That will free up the space.

• Non-alphabetique of the folders and files in Windows Explorer

  Why the my folders and files in the right pane sometimes not listed in alphabetical order in the Windows Explorer window when I click on a folder in the left pane?

  Tuesday, September 25, 2012 16:52:36 + 0000, Condor1A wrote:

  Why the my folders and files in the right pane sometimes not listed in alphabetical order in the Windows Explorer window when I click on a folder in the left pane?

  The order in which it appears is the order of your choice. To change the order,
  Click the heading of the column that you want to sort. Click one
  second time to change the Crescent in descending, or vice versa.

  Ken Blake, Microsoft MVP

• file restoration and file under the icons of file names

  I searched, found and lost the answer to this question. How to restore the names of folders and files under the icon in windows Explorer. They are all displayed on save. However, when I open a file or a folder that they are not shown and I have to go through many twists and turns to find the file I'm looking for.

  Open a windows Explorer... at the top menu bar click view, uncheck "Hide file names".

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Right click mouse to drag and drop or rename folders and files does not work

  For a few weeks now, I had problems with the right click function to drag - move files and folders, or rename files and folders. This happens when I use windows Explorer or access to the computer and click thruogh for a feature. He can't go to all the folders and files, but many. I can't right click on these folders or files to change the sharing because explore closes and restarts on the desktop with a right-click. Manifest error "appcrash" reason. I have Norton Security suite installed and neither Norton or your fix program detects a problem.

  Please notify.

  awehnert

  Have you installed or removed/uninstalled all hardware or software or drivers since just before the start of this problem (if so, exactly what - name, version, device, whatever)?  Norton take any infection, although it is said that he cleaned their since just before the problem started?  If so, you know the names of these infections?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  It's been a while so I'm not sure that you have a fairly old restore point but it is possible - hopefully.

  Are these files and folders in your user profile?  If Yes, your user profile may become corrupted (in fact, if can still be corrupted if the folders are not there).  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  We will check some of your system files and hard drive for ccorruption that may be the cause:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to start at the next startup.  Okay, then restart so that the program can run. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Please checkwith the manufacturer to find out if there is a mouse driver updated (software or firmware) available for your make and model of mouse and your version of Vista.  Download and install to update the driver to the most recent available and see if that solves the drag and drop problem (even though I know that this will not affect the question of the name change).  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it doesn't (or if SFC detects corruption it cannot repair), we you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In Windows 7 Windows Explorer shows do not all drives, folders and files?

  I have windows 7.  In older versions, Explorer windows would list all drives, folders and files.  It makes it easy to move, copy, create folders.  Is it possible to get mine to do the same thing?

  Click on the Start button and then on the images in the list on the start menu, top left is organize, click on this list, then click on folder and search options, go to the view tab section, search for and click Show hidden folders files and readers, click apply and OK.
  

• I want to print a complete list of the folders and files that are on C:, but do NOT want to use &#60; PrntScrn &#62;. Is there another way? (Windows XP home edition)

  Print out c: folders and files.

  Such a command would be:

  dir d:/press s > %userprofile%\Desktop\directory.txt

  who will place the file on your desktop.

  But you'll probably find Directory Karen printer is easier and more convenient to use.

• I lost all my folders and files from all contexts of my. Is there a way I can find my file and contects and transfer them to my new email address?

  folder and transfer contects

  Some used body my e-mail and now I have to create a new account. I lost all my folders and files all my contects.is there anyway I can find my file and contects and transfer them to my e.mail new address, I am one who is suffring now .i should add every thing from the bigning.i had this acct almost 10 years.

  If you use Outlook Express, then locate the *.wab computer.  If this is not the case, then you must be specific to the subject what email program you use, and what form of e-mail account you have and what operating system you are using, as your questions depend on this, and we have no idea if not.

  Steve

• 2 operating systems: Windows 7 makes all folders and files on another partition (Windows XP) read-only! What now?

  2 operating systems: Windows XP and Windows 7

  Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!

  Once, I opened a file from "My Documents" from XP in Windows 7.

  But when I Wen back to Windows XP.

  But while starting up, I got a lot of error messages:

  Access denied!

  When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.

  But after I tried to void that lookt again to see if she had cancelled it.

  But he remains unalterable reports!

  I have lookt on Google and Bing, but could not find someone with the same problem!

  Now it works!

  I used these 10 steps to solve the problem!

  10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):

  1. press F8

  2. select Safe Mode

  3. log in with an administrator account

  3. go into the properties of the folder / partition / file that you cannot access

  4. Select security and then advanced

  5. in 'owners' define yourself as an owner (if it is not defined)

  6. click on 'Ok '.

  7 configure yourself: make sure you clickt on the box "Total control" (allow)

  8. click 'OK' and then 'apply '.

  9 reboot

  10. the test (if it still does not, try again a few times)

  ____________________________________________________________________________

  And then it worked!

• Within the last week, that all the folders and files on my hard drive were selected 'read only '.

  I unflagged all the folders and files that I share on my home network, however, I am not able to rename them or save them on my PC from my laptop on my wireless network. This has happened since May 12 and I suspect an auto update changed or recover from something.

  Running Vista Home Premium SP2 on PC

  Laptop is Windows 7

  Thanks for getting back to me Mick!

  I did a restore to 5/10 when I had no problem, but the problem persisted.

  I'll have to try Norton support. This may be something they did.

  In the meantime, I managed to change the names of files by connecting to the PC with the account of my wife who as co-owner had equal rights and the sign of the laptop is its ID as well so it worked, but it isn't always fair.

  Once again, thank you...