Dress up the shape of the object

Similar Questions

• How drag and drop a picture into a shape of the object?

  On my old Lion system that I used to be able to drag a picture from iphoto in the shape of the object open in Pages.  I can't be able to do more.  The system changed?  I tried to use Inspector (under help), but it won't let me access the file of the photo on the right.

  You can drag and drop a picture in a form in v4.3 Pages ' 09, but this can be done in any version of v5 Pages. Quite different applications, as well as more recent Pages has lost about 100 features that were in its antecedent.

  Check if you have Pages ' 09 v4.3 in your Applications: iWork ' 09 file. If so, use it.

  Pages v5 requires that you select a shape, and then on the Image tab in the right panel, you choose Image, scale to fill fill, and then select your image for the background. You cannot select this image from the inside, but you can add text to the form that will appear on your image.

• Select the shape of an object on an alpha channel

  I want to select the shape of my object in my alpha channel to add a mask.

  

  Effect > prospects > drop shadow

• How to get the values of the shape of the object in the form of process field?

  Hello
  
  I created the resource object and it has the shape of the object that are associated with him. When the user self praying for this user RO add information in the form object field ho can I get these values as a process?
  
  How to get the values of the shape of the object in the form of process field?

  Hello

  If you want to map the form field Number in the form of process field go process definition - Data Flow Mapping tab you can add the field map.

  Thank you
  Patricia

• Don't not wrapping around shape of the object of the text

  Hi all

  This is probably a silly question, but I can't seem to get my wrapping around shape of the object to the text.

  I can see the edges of the object are well identified, but the text wraps around them.

  What I' hurts lm?

  -Images must be in their own framework, or do they need to be in the same frame as the text?

  -Do I need to do first the images with a transparent background in Photoshop? If so, what is the ebst method? Use PNG, Gif, PSD, Alpha channel...

  -Do I need to order my items in ID to set the correct order (sent to the background image or stuff like that..)?

  

  Thanks in advance for your help

  Tom

  PS: I have attached the screenshot as a file as an attachment online apparently gives question; If you can view full size

  It seems that your picture is on the top of text... try to change the by object stacking order > Arrange > Send to back...

• Why am I able to drag the object with no padding over the inside of the shape?

  I downloaded a model for a jacket and used the illustrator file. The hyperlink for download is here:

  https://DL.dropboxusercontent.com/u/1177612/Glossyicon.com/Hoodie_template.rar

  The object on the left side won't let me enter it inside after I get out of the filling. But the object on the left can still after that I go out its filling. I don't know what is happening here. Any ideas guys? Thank you.

  yuske,

  Is there a clipping mask or something? It is selectable, no matter it's invisible.

• Rotation of the object

  Hey guys,.

  I am trying to rotate an object using:

  private var object:Image;
  

  object.rotation = -7;
  

  but he turns it around the coordinate 0,0 but I want to turn across the width/2, height/2 coordinated - which means in the middle of the object. is this possible?

  No, I'm not buying a case dethrone oh wait... omg!  It is a matter of real Director!  * surprised *.

  setting the point of registration for a display object is quite possible.  Here is an example for registration point in the center of a square graphic.

  var squareSize:uint = 100;
  
  var square:Shape = new Shape();
  square.graphics.beginFill(0xFF0000, 1.0);
  square.graphics.drawRect(-squareSize / 2, -squareSize / 2, squareSize, squareSize);
  square.graphics.endFill();
  
  square.x = stage.stageWidth / 2;
  square.y = stage.stageHeigh / 2;
  

  If you do not have access to your object, drew such a bitmap that has always a {0, 0} record, you can place inside a displayObjectContainer (sprite) and rotate the container:

  var container:Sprite = new Sprite();
  container.addChild(object);
  
  object.x = -object.width / 2;
  object.y = -object.height / 2;
  
  container.rotaion = -7;
  

  If you prefer not to use a container to the Center-register your bitmaps, it is possible to use a matrix to translate your BitmapData when you draw() to a Bitmap.  It's a little more confusing than the use of a container, but it some cases that it is worth.

  [EDIT] Furthermore, my sarcasm wasn't all directed at you, bba.  Thanks for your question.  seriously.

• Problem creating Cup by text on the object

  So I group of shapes that are each a different color a rectangle (took a rectangle and used the tool for scissors divide to recolor). Each color is its own form, but I put them all in a group if that makes since. Then I put the text above the form to make the cut through and it turned out all rectangle white? It broken, but got rid of the gradient? Whats happening?

  Action taken:

  Click with the right button on text

  Vectorize

  Select the object and the text

  Click on exclude to scout

  Thanks, Tommy

  You want an Opacitiy mask.

  Make the text in black on top the glomeruli color objects.

  Select both and choos make mask in the transparency Panel.

  Uncheck the Clip and invert the mask.

• Rollover does not start because of the arrangement of the object?

  I wanted to make a button with two pieces, a circle in which a rolling image apears and a rectangle which slide below the circle to the overthrow and contains button link.

  I managed to get this working using the widget flipping transition.

  

  I simply had to fill an area with an image containing the shape of a rectangle and the text I wanted and place it to the left of the box for the normal state and the right of the box for the rollover State. Then I put another box in my background color on the space where the rectangle can be seen in a normal state and place my circle above it (which was just another box with two fillings of different image for my circle with and without the image, I went between the normal and rollover).

  

  This worked well, until I went to use the button on my site, I had to switch the box in the background color for the two images (either placed or completed, which made no difference) which were my sidebar and my experience. None of them are solid colors, so I had no choice but work with images cropped for this.

  Button continued to work without any problem, but I had to put all its components on the same layer. The agreement within this layer, however, it stopped working properly. What was the order of the objects: rectangle (below), images background (the middle one), circle (above), then the rectangle is more oriented to be the reversal of State when I flew over my cursor of the circle (who have answered correctly).

  But when I removed the background images, button worked fine again, only the rectangle could be seen on the left of the circle.

  It seems that it can turn only to the State of overview on hovering over the circle when the circle is just above the rectangle without other elements between the two...

  I can't find any other way to hide the normal state of the rectangle, since by changing the ruins of opacity sliding visuals, a fill may not be cropped and I cannot make a picture placed either because then I cannot slide to the right.

  Can someone help me solve this problem?

  -Elby

  I could remedy this by putting the rectangle, background images and the circle into a single slate button. There always seems to be some minor problems with the setting, but I think I'll manage to challenge those.

• Illustrator problem - dividing objects is one of the objects disappear

  I am putting a vector that has been traced a jpg - when I try to remove a small shape 'dividing' of the object in the background using tools of pathfinder - the rest form the background object is deleted

  Any ideas greatly appreciated.

  Here is how it is simple if you use the option "ignore white."

  You should start, because you're making it harder than it needs to be.

• Pathfinder will unite all the objects on each layer

  I wonder if anyone can help me with the script, which is unite mode form via pathfinder on all the objects on each layer.

  I manually activate a layer, pressing ctrl + a, and then clicking the shape mode button unit. Then, the layers are over 50 then, making him the great peace of time.

  Piggyback off pixxxel schubser

  function MergeAllLayers() {
      // exit early if there are no files open
      if( !app.documents.length ) return;
      var doc = app.activeDocument;
  
      // clear selection
      doc.selection = null;
  
      // loop through all layers
      var layers = doc.layers;
      for( var i = 0, ii = layers.length; i < ii; i++ ) {
  
          // select everything on the current layer
          layers[i].hasSelectedArtwork = true;
  
          app.executeMenuCommand("group");
          app.executeMenuCommand("Live Pathfinder Add");
          app.executeMenuCommand("expandStyle");  
  
          // clear selection
          doc.selection = null;
      }
  }
  
  MergeAllLayers();
  

  Equal to true, the definition of the hasSelectedArtwork layer property is a fun thing to select the entire document on a layer, you've just got to make sure to disable any other settings first.

• Encompassing not aligned with the object

  Hi all

  I've been using Illustrator CS6 and during the transition to the 2015.3 CC I had the following problem: when I create an object, it's bounding box does not align, it is impossible to turn the object easily. I suspected, I just pressed accidentally a few keyboard shortcuts, but reset settings and even move the file didn't help. I looked all over the forums, but it seems that only a few people experience the same problem, and their questions remain unanswered I will be very grateful for any advice how to solve this problem, because I come to CS6 because of this problem. Thank you very much!

  

  Object > shape > expand shape

  Context menu click object > transform > reset Bounding box

• Illustrator does not resize / move item to a given pixel, return to position size / previous. And also when resize, reduce some element complex, it completely distorts the object.

  Hi guys. I'll have much declined of disorders I've done the last Illustrator update (17.) on my PC. Sometimes works, sometimes not. I think that it is a software bug.

  When I try to resize or move a shape or other element to a given pixel, he returned to the size or the previous position. It won't let me change if a pixel more or less than my desired. I took twice as much time to finish the work, make cuts.

  Moreover, when I resize an objetc, a logo for example, which consists of several elements for a smaller size, the object is completely undetermined. It does not keep the unit and the initial spacing between the elements.

  

  

  Actually,.

  In such cases, the first assumption is aligned to the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Apart from this, it may be time to move to an updated version or CC2014 (18.1.1).

  Using the CC Office management application, we can go to the gear icon at the top right and go from there.

• A text will not wrap around the object. Some does. Anyone?

  I worked in InDesgin (currently the CS6 for Mac) for many years. I'm not an expert, but fairly well-versed and comfortable with the program. I think I know almost everything about the wrapping of text and its options and how it works. But it drives me crazy.

  I have an imported MSWord part of the text. I have an item I want to insert in the text. Normal procedure. Easy. But this text will NOT wrap around the object. What about other texts? Yes. Other text in the document wrap around that object even very well.

  I rebooted the computer and the program. Check the settings as much as I can think and even spruced up the document from scratch as a MS Word document. Yet, no film.

  This happened to someone? What is going on? Help.

  Check the options of text block for the text that will not wrap. Ignore text dresses it is checked?

• How to set text in an object, so the object expands with the text and has even space on both sides of the object in illustrator cc?

  How to set text in an object, so the object expands with the text and has even space on both sides of the object in illustrator cc?

  R,

  You can do this:

  (1) create the initial direct Type;

  (2) in the appearance palette dialog, click on add a new fill and define the color as you wish;

  (3) effect > convert to shape > Rectangle corners round/Rectangle/Ellipse and set parent > width/extra height as you wish (essentially what needs to be added to the size of the bounding box, if anything).

  After that you can change the Type and the filled area will fit as shown on the picture.