Drilled down reports

Similar Questions

• DRILL DOWN REPORT for DIFFERENT SETS of DATA in 11G

  Hello.
  My requirment is to zoom with 2 sets of data report.
  My first set of data all have the chart of accounts, the second set of data transactions.
  in my report, I have 2 tables of data. With the accounts, and when I click on an account and get all transactions for the account in the second table of data.
  Anyone know how I can do this
  
  Any help would be apreciatted
  
  Paulo

  You can use the zoom of the strategy, well described by my friend Kan:

  http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html

  concerning
  Jorge
  p.s if this answers your question please grant points, and then close the message

• filter by Navigate/drill down report 1 report 2 problem

  Dear guys,
  
  OBIEE answers I did a report (1) where we can navigate to report (2) based on the type, the week or post.
  Report (2) are indeed more reports with different filters, but the user don't know for example:
  to navigate on the post, the post is invited to report (2) _1
  to navigate on the type, the type is invited to report (2) _2
  also, we can navigate based on the type, the week and the post, in report (2) the 3 columns are promted._3
  
  -in report (1) there is already a filter on the type; type is (1,2,6,7)---
  
  What is my problem? Well, when I browse the report post (2) it will show all values of the type based on the post, OK...
  I don't want to see all values of the type, but only for type 1,2,6 and 7. as the report (1)
  When I put the filter type also to report (2) _1 it won't work because it will show only 1 value...
  
  Anyone know how I can do right?
  
  Kind regards

  Hello.

  If you use the option of browsing the properties of the columns (or you can use GO URL) from one to another application, you must know the fact that you analyze only the column value for the current line, that is the way you see only one type of report (2) _1 (after you update report (2) _1 with type and post is invited).

  To be propagated to all values go to the column type in the report (2) _1 and filter choose / advanced filter based on the results of another request and include the type of report (1) column, it looks more like the subquery.

  Kind regards

  O Goran

  http://108obiee.blogspot.com

• Trouble with Drill Down report

  Hello
  
  I have problems with getting example of Carl works. http://HTMLDB.Oracle.com/pls/OTN/f?p=11933:13
  
  It's my main request:
  

  SELECT
    AD_SPRIDEN_ID,
    AD_FIRST_NAME_PREF,
    AD_LAST_NAME_PREF,
    AD_SPOUSE_BANNER_ID,
    AD_SPS_PREF_FIRST_NAME,
    AD_SPS_PREF_LAST_NAME,
    AD_ATHL_MATCH_GIFTS_CFY,
    AD_CURES_MATCH_GIFTS_CFY,
    AD_UNRES_MATCH_GIFTS_CFY,
    AD_ENDOW_MATCH_GIFTS_CFY,
    AD_FACIL_MATCH_GIFTS_CFY,
    AD_SPS_ATHL_MATCH_GIFTS_CFY,
    AD_SPS_CURES_MATCH_GIFTS_CFY,
    AD_SPS_UNRES_MATCH_GIFTS_CFY,
    AD_SPS_ENDOW_MATCH_GIFTS_CFY,
    AD_SPS_FACIL_MATCH_GIFTS_CFY,
   FROM MATCHING_GIFTS

  I want to dig the last year of data:
  

  SELECT
    AD_SPRIDEN_ID,
    AD_FIRST_NAME_PREF,
    AD_LAST_NAME_PREF,
    AD_SPOUSE_BANNER_ID,
    AD_SPS_PREF_FIRST_NAME,
    AD_SPS_PREF_LAST_NAME,
    AD_ATHL_MATCH_GIFTS_CFY_1,
    AD_CURES_MATCH_GIFTS_CFY_1,
    AD_UNRES_MATCH_GIFTS_CFY_1,
    AD_ENDOW_MATCH_GIFTS_CFY_1,
    AD_FACIL_MATCH_GIFTS_CFY_1,
    AD_ATHL_MATCH_GIFTS_CFY_2,
    AD_CURES_MATCH_GIFTS_CFY_2,
    AD_UNRES_MATCH_GIFTS_CFY_2,
    AD_ENDOW_MATCH_GIFTS_CFY_2,
    AD_FACIL_MATCH_GIFTS_CFY_2,
    AD_ATHL_MATCH_GIFTS_CFY_3,
    AD_CURES_MATCH_GIFTS_CFY_3,
    AD_UNRES_MATCH_GIFTS_CFY_3,
    AD_ENDOW_MATCH_GIFTS_CFY_3,
    AD_FACIL_MATCH_GIFTS_CFY_3,
    AD_ATHL_MATCH_GIFTS_CFY_4,
    AD_CURES_MATCH_GIFTS_CFY_4,
    AD_UNRES_MATCH_GIFTS_CFY_4,
    AD_ENDOW_MATCH_GIFTS_CFY_4,
    AD_FACIL_MATCH_GIFTS_CFY_4,
    AD_SPS_ATHL_MATCH_GIFTS_CFY_1,
    AD_SPS_CURES_MATCH_GIFTS_CFY_1,
    AD_SPS_UNRES_MATCH_GIFTS_CFY_1,
    AD_SPS_ENDOW_MATCH_GIFTS_CFY_1,
    AD_SPS_FACIL_MATCH_GIFTS_CFY_1,
    AD_SPS_ATHL_MATCH_GIFTS_CFY_2,
    AD_SPS_CURES_MATCH_GIFTS_CFY_2,
    AD_SPS_UNRES_MATCH_GIFTS_CFY_2,
    AD_SPS_ENDOW_MATCH_GIFTS_CFY_2,
    AD_SPS_FACIL_MATCH_GIFTS_CFY_2,
    AD_SPS_ATHL_MATCH_GIFTS_CFY_3,
    AD_SPS_CURES_MATCH_GIFTS_CFY_3,
    AD_SPS_UNRES_MATCH_GIFTS_CFY_3,
    AD_SPS_ENDOW_MATCH_GIFTS_CFY_3,
    AD_SPS_FACIL_MATCH_GIFTS_CFY_3,
    AD_SPS_ATHL_MATCH_GIFTS_CFY_4,
    AD_SPS_CURES_MATCH_GIFTS_CFY_4,
    AD_SPS_UNRES_MATCH_GIFTS_CFY_4,
    AD_SPS_ENDOW_MATCH_GIFTS_CFY_4,
    AD_SPS_FACIL_MATCH_GIFTS_CFY_4
  FROM MATCHING_GIFTS

  Example if the user clicks on AD_ATHL_MATCH_GIFTS_CFY in the first query, I want the following fields to display (to be noted that these are columns. "I wish the real value of the columns to display):
  AD_ATHL_MATCH_GIFTS_CFY_1
  AD_ATHL_MATCH_GIFTS_CFY_2
  AD_ATHL_MATCH_GIFTS_CFY_3
  AD_ATHL_MATCH_GIFTS_CFY_4
  
  or if the user has selected AD_SPS_CURES_MATCH_GIFTS_CFY, I want the following to view:
  AD_SPS_CURES_MATCH_GIFTS_CFY_1
  AD_SPS_CURES_MATCH_GIFTS_CFY_2
  AD_SPS_CURES_MATCH_GIFTS_CFY_3
  AD_SPS_CURES_MATCH_GIFTS_CFY_4
  
  Any help is appreciated,
  
  Kelly

  Hi Kelly,

  OK - two things:

  First, you must have the onclicks on the a tags and, second, the ID attributes to the div must be unique, you can't really use ID_xxx for each of them because the javascript function would use one that we found with the given id attribute and you'd have two for each line.

  So, to modify the HTML Expression of columns at:

  <a href="#" onclick="javascript:getMemoCredits('#ID#');">#MEMO_CREDITS_CFY#</a><div id="MEMO_#ID#" style="display:none"></div>
  

  and

  <a href="#" onclick="javascript:getSpouseMemoCredits('#ID#');">#SPS_MEMO_CREDITS_CFY#</a><div id="SPS_MEMO_#ID#" style="display:none"></div>
  

  Then update your javascript to use the new ID for the DIV attributes:

  ...
  function getMemoCredits(ID)
  {
    var d = document.getElementById("MEMO_" + ID);
  ...
  

  ...
  function getSpouseMemoCredits(ID)
  {
    var d = document.getElementById("SPS_MEMO_" + ID);
  ...
  

  Andy

• PDF down report in a new window or tab

  I use reports 10g. I got a report that opens in PDF format through web browser applications server.

  It has zoom report that correctly opens in the same window.

  I want to open report zoom in a new window or tab of the browser.

  because the drill down report exercises when going to the main report its result is lost he should run again.

  If the output of the main report is in html, then using SRW. SET_HYPERLINK_ATTRS('target="_blank);  report zoom is open in a new window

  but on this PDF does not work.

  concerning

  I had the use of integrated suite solution:

  SRW. SET_PDF_ACTION ("iexplore.exe http://YourAppServername/reports/rwservlet?report=ReportName&optionalparametersQueryString

• Difference between Master detail report and Drill Down

  Hello
  
  I want to know the difference between Master detail report and Drill Down. I'm confused about their use. Can inform you when to use what?
  
  Help appreciated
  
  Pradeep

  You must first help yourself by searching instead of these initial questions.

  Master in detail:
  As a condition of purchase order. The master is arrested in detail, and the details are elements...

  Dril Down:
  As the opening of report the report as hyperlink for more details...

  -Clément

• Drill Down in the hyperlink and return link

  Hello
  
  In one of my report (REPORT A) I am drilling down to help navigate to another report (REPORT B), and I have a 'back' at the bottom of the report.
  
  I am facing the problem depending on when I do this:
  
  Step 1: I am opening A REPORT and digging using the hyperlink to one of my column in REPORT B.
  
  Step 2: open another report, REPORT C, which has NO connection with the REPORT A or b of the REPORT.
  
  Step 3: When I click on the link 'back' at the bottom of the B REPORT, he takes me to REPORT C instead of A REPORT.
  
  How can this be repaired? Help, please. Thank you.

  Hello
  This report is and B report both are placed on different pages.
  If so, try using the back button.
  Add view narrative report and instead of the code below.
  {input type = "button" value = "Click here"
  onclick = "Window.Location ='saw.dll?" Dashboard & portal Path = / shared/Group_Folder/_portal/My Dashboard & Page = page 1 ""} "

  You can get CheminPortail of you reports when you change the dashboard page.check CheminPortail in the url of the browser after you change the dashboard.
  Don't forget to click on HTML mode narrativ

  Kind regards
  Srikanth

• OBIEE navigation/Drill Down

  Hi all
  
  I have a question about OBIEE navigation/drill down.
  
  I have 2 reports
  
  Report1 I want all data when "Subscriber sucks" and in Report2 I want all data where "Subscriber is not null.
  
  When I run Report1 data are very well and when I click on Customer Number(navigation is enable), but for the filter of the Report1 Report2 is also get past and Report2 filter is ignored.
  
  Any solution?
  
  Please help me.

  Kiran,
  Report 2, change your filter "Subscriber is not null ' and choose 'protect the filter.
  A column has no need to be 'invited' to take values, without protecting the value is replaced "is not null" to the customer number = "xxxx" value you have navigated from.
  Try, if it is correct pls brand Q responded and award points.

• Drilling down into charts - can someone explain the behavior it please

  Hi guys,.
  
  I'm trying to understand how a particular chart is percables "Sample Sales".
  
  The report in question is "Tiering" 8020 03 and Distribution. I circled the report that I clicked on:
  ! http://img407.imageshack.us/img407/4103/screen1c.jpg!
  
  Then he took me to the more detailed view of the same report (8020):
  ! http://img203.imageshack.us/img203/2144/screen2c.jpg!
  
  I checked the report and the Interaction property in 'Additional graphical options Menu' for this graphic has been set by default. The measure, which is be drilled percentile - and it also has defect in its properties of interaction.
  
  So I guess I have several questions:
  
  1. how this report drill level more detailed on the same report? (is it because everything is set to "Is invited")?
  
  2. why the value "Default" allow for drill-down in the chart? I tried to create my own graphics - and by default it does not trigger an exploration at all, even if there is some data at a lower level.
  
  3. can I break into place and have some content may remain relatively static - and other fields change? I saw a similar question before - where it was suggested to use the greater than 1 report in the dashboard view. (instead of combining any compound notice).
  
  Thank you

  # 2. I think that you did create hierarchies in your SPR for the dimensions and measures that you have on the report.
  For n ° 3. I think the first 3 reports in the dashboard are aligned horizantally within a section of the dashboard and "Drill in Place" has been activated on the section / meet these demands. Check the properties of the section. If you want this problem, try each report incorporated in different sections and activate the drill in place for each section where you want to drill additional but content rest remains the same.

  BTW how you paste your dashboard here? It's cool image display mode... receive your answer.

  Thank you

• We can transport guests page drilled down?

  When drilling down in OBIEE 11 g, a new page opens. The new page is not carrying the guests it shows not what are the active filters. How see us guests on the page break down?

  Thank you

  Sri

  In fact in the properties of the section, there is this option to activate "drill in place.

• When drilling down, is it possible to see all values of next one click level

  While drilling down, it is possible to see that the next level for all the level 1 values instead of just the value it's clicked?
  Is there a feature that we can activate or do differently?

  Hello

  Click on the column header name, break through all levels.

• Drill thru report error test Essbase studio

  Hi all
  
  Drill thru report Essbase studio produced the below error: impossible to retrieve the drill to the result.
  
  Error in the select statement. Line = 2466.
  Error in the execution of the query. Check the query and try again.
  Cannot execute an SQL query
  ORA-01791: not a SELECTed expression
  
  No idea I'm able to test some of the dimensions, but this error is coming up for a few dimensiosns... I checked all the joins between the dimensions and facts... all right.
  
  Thank you
  Praveen

  I suggest to look at the logs to see if you can find the generated SQL statements or to rent the values being passed. then you can start to debug the issue

• In OBIEE graphics, how do you drill downs work on custom forms?

  I posted this Linked In and not got an anser, so I hope someone here has an answer.
  
  I wrote a summary query / table for a dashboard to OBIEE 10.1 with a lock down (technically, it's a 'navigation') for more information. This table breaks down the data by quarter and by geography (both are columns of discipline) and I can down this drill to work just fine. But I also this table broken down by some calculated custom fields (CASE statements WHEN) that classify the revenue / risk / Upside etc. (which are not the columns or the column values in the area in question).
  
  When I add a drill down or sail depending on calculated columns, I get a full set of data... not a set of data filtered for this job here calculated. (Yes, I have all the EAST GUEST filters configured properly, and Yes formulas in queries source and destination are the same).
  
  Anyone have any ideas on how to make the zoom or the navigation works on custom formulas?
  Thank you
  Ted

  It was all done using normal responses.

  It is very important that the formulas are the same
  (They must match letter for letter case when X = Y then 1 2 other end is different from the case when X = Y then 1 2 other end ).

  Also if using the prompt in the dashboard do not forget to do the titles exactly the same thing. What I do, it of create a formula and copy it and then paste everywhere else. Keep the same column headers as well.

  Hope that helps.

  Concerning

  Chris

  Published by: ChrisMarais on June 9, 2011 19:12

• Drill Down not working not not on Contact Records.

  Hi people,
  
  The grass environment that I'm working on has recently been upgraded to R16 since then I am not able to drill down on the page of list of contacts Contact details page. Here is the error that I am facing:
  Homepage
  
  Error: from/OnDemand/user/ContactDetail
  
  GENERIC_ERROR
  
  Please think!
  
  Thank you and best regards,
  Amit Kul

  Hello!

  It sounds weird... I didn't have this kind of problem... And I have records (account or contacts) with much more than 20 related items (many activities, requests for service,...).

  I think that the truth is out...

  Kind regards

  Max

• Drilled down in a new tab instead of in the same tab

  I have a tab\page with the report, which displays a column with data hierarchy (countries).
  Pivot table header looks like: day, measure1, date2.
  where each measure column is divided into multiple columns based on the number of countries: countries 1, country 2 and country 3.
  
  When you click the sepecific country, the display is updated. The table is the same, but instead of country, I now see cities in the selected country: columns Ville1, city2, etc. '.
  
  The problem is that the refreshed view is open in a new tab and the other tabs have disappeared.
  Downstairs there are "back" link, but I don't want this behavior.
  
  How can I configure the forest down to be in the same tab and keep showing all other tabs as well?

  If it's not navigation then it must be dimesional hierarchy in the administration tool. If you are clicking on a column and same report opens in another page with an additional column it means it is dimensional hierarchy in place.

  In that sefyu access section properties and check "drill in Place.

  It will open the report on the same page.

  Kind regards
  Sandeep