drive a fan with a cycle

Similar Questions

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Videos YouTube loads but after 2-4 s, the area of the drive gets white with ivory white... Help

  Videos YouTube loads but after 2-4 s, the area of the drive gets white with ivory white...

  This has happened

  Each time Firefox opened

  See: http://support.mozilla.com/en-US/kb/Check+for+Updates+is+disabled

• What floppy drive is compatible with Satellite M40X-119?

  Hello
  My question: which USB TOSHIBA floppy disk drive is compatible with my laptop model? I found in our stores several different FDD: 3109E PA; PA 3109U; PA 3214U. Price $ 26-140. Toshiba sites is not know about these products.
  Thank you
  Sergei

  Hello

  FDD Drive Kit PA3109U-1FDD is compatible with your Satellite.

  Good bye

• Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

  Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

  If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

  Think I'll get a laptop samsung...

  Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

• The SD-R2612B Combo drive is compatible with Satellite 1800-314

  Please help with the following upgrade:
  The SD-R2612B Combo drive is compatible with the 1800-314?
  Is the version of the BIOS relevant?

  Hello

  Sorry, but I think that this kind of information you can get from a partner Service. Contact with them. You can find Service partners authorized on

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye

• Replace drive hard ze4900 with disk 5400 RPM?

  I am trying to replace the HARD drive on a ze4904US Pavilion Notebook, Phoenix BIOS F.15...  The original drive is a 40 GB 4200 RPM ATA drive.  I found a 5400 RPM 40 GB ATA HDD, rider that he is a slave, installed, but it is not editing as C:.  This laptop does support the 5400 RPM drives?  Should he be attached as master or slave?

  I can boot from the CD of the OS, which displays the C:\ > and complains that the path is bad.  Try to install Windows XP immediately fails with an IO error.

  If I start the recovery console, WFP, I can see the partition (\device\harddisk0\partition1), but it is not a drive letter assigned.

  If I drop in the BIOS, run the HARD drive test, it displays 'Diagnostics not supported' and 'Device No. IDE'

  The drive 5400 RPM came a Win Vista laptop and was initially cavalier as master.  If I leave it set as master boot, a CD of SystemSuite, he gripes 2-4 e/s, (ignored) errors, takes about 10 minutes to pass the time-outs of the IO error, but finally sees the old partition on Win Vista.  So I know that the equipment is in place OK.  Trying to do a trivial co-operation (volume set name) fails.

  I would like to reformat the drive and start with a file system clean, but format C:/FS: NTFS, fails with "drive not valid or not drive."

  I think I can build a bootable CD to update to e.16, the HP BIOS later.  That would support the drive 5400 RPM?

  Larry
  
  Please click the White Star Kudos to say thank you for helping.
  Please check accept as Solution if my help has solved your problem.

  Fixed! Found a Hitachi Travelstar 60 GB HDD, 7200 RPM, IDE interface, was attached to CSEL, inserted in the HP Pavilion ze4904us, put under tension and it worked like a charm.  The car was seen by the BIOS/advanced/HDD/Diag and it test very well, at least through quick check of phase 1, then I released on bail.  Under BIOS/Palestinian territories occupied? / BootOrder the drive is detected correctly (displays the correct model ID).  Installed WinXP and on my way.

  I used the HP WinXP SP2 original installation CD.  Does not all of the HW (WLAN, VGA), video drivers.  Subsequently found most of these on the HP/Support/downloads page.  Lack yet the program Program Files/utility/One-Touch to change the definition of the buttons easy One-Touch access at the top of the keyboard, but the work of bindings by default OK.

• Model: G6-1D98DX, refurbished: renovated pavilion laptop g6, replace the fan with what?

  When I powered my laptop Pavilion G6 refurbished, it gives a disturbing message on the fan turns not and the processor of cooking and automacially stops in 15 seconds. OK, replace the fan.

  By the? appropriate? HP 'Maintenance and Service of Guide' (Doc PN 649111-002), I took part BUT Guide HP, the processor heat sink is held by 7 screws... only it renovated its heatsink is a model of 4 screws, and the motherboard was ever available for 7 screws.
  How to order the appropriate and/or fan-with-heat sink fan? the fan-with-heat sink seems to be a unit

  use data created on the fan or radiator Assembly to try to find a part on google or ebay.

  http://www.eBay.com/ITM/new-OEM-HP-Pavilion-G6-G6-1000-series-cooling-fan-with-heatsink-641024-001-4-pin-/251637960612?hash=item3a96ca8fa4:g:dTsAAOSwq5lTmneN

• What 500 GB SATA drive is compatible with the APS Thinkpad?

  I want to upgrade the main drive in my W500 at 500 GB, or possibly put the biggest drive in Ultrabay W500 carrier. I would like APS to work for the two discs.

  Does anyone have a * real * experience of the use of the APS with such a high capacity drive?

  I think the Hitachi Travelstar 5K 500. B family of readers (9.5 mm in height), but the OEM hardware manual doesn't speak any "Immediate unloading" command (which - I hope I have this right - does not write unwritten cached buffers but parks immediately drive), only the command "immédiate Idle" with function "unload":

  Unloading feature:
  The UNLOADING FEATURE of the IDLE IMMEDIATE command allows the host immediately unload the head. The device stop reading to come if it is ongoing. If the unit performs a write operation, the device suspends writes data cached on the support as soon as possible. Data in the write cache is stored, and the device takes over data cached on a writing material after receiving a software reset, a Hardware Reset or any new command except IDLE IMMEDIATE with the UNLOADING FEATURE

  I phoned HitachiGST support, and they told me that large OEM's like Lenovo order their discs with custom firmware OEM versions and support Hitachi were not informed of what are the characteristics that could affect.

  In theory the Lenovo readers could use a different command for "Immediate Idle" code of practice regular, unmodified firmware does not support.

  Anyone with more information?

  I ended up buying a Seagate 320 7200.3 drive 7200 RPM with integrated protection of the 'G-force '. Leaving active APS has not led to compatibility problems: the drive Park when the laptop is shaken, but I don't know if it's the result of the APS system or the built-in accelerometer.

• Age of Empires II - "can't initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  Hello

  I have a problem of Age of Empires 2 running on my new computer. Keeps displaying the following error message: "cannot initialize the graphics system. Make sure that your video card and driver are compatible with DirectDraw. "Someone at - it solutions to this? I have already visited many forums and trying different solutions; None of them helped.

  Tried solutions: change the compatibility and as an administrator, switching to 16-bit color, turn off my graphics card, execution of the extension "nostartup" of the game, looking for old patches from Microsoft (which most are now unavailable due to the game being so old). I KNOW that others have been able to get this game to work on the Windows 7 operating system, but with a few other quirks and I KNOW my video card and driver are more than capable of handling this game. Any suggestions?

  System Specs:

  System manufacturer/model number Dell/Studio 540
  Operating system windows 7 home premium 32 bit
  6 GB of memory
  Graphics card ATI Radeon HD 4350
  Monitor (s) displays Reference Dell ST2410

  Thanks in advance,

  EP

  I had the above problem with AOEII:Age of the Kings. My brief spec is Windows 7 Ultimate edition (SP1) and a card nVidia 8600 GT. I did the following (make sure you reboot after each installation):

  Make sure that you are running the latest patch of AOEII:AOK (2. 0 a):

  http://www.Microsoft.com/download/en/details.aspx?ID=35

  Download and install the latest version of DirectX:

  http://www.Microsoft.com/download/en/details.aspx?ID=5264

  Download and install the latest nVidia Driver suite. I left the autodetect my card software and reset all my default settings. I also installed the full software suite:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Finally, right click on the shortcut of AOE and click Properties. Click on the Compatibility tab and select the following:

  -Run this program in compatibility mode - choose Windows XP Service Pack 2 (!) NOT 3!)
  -Disable visual themes
  -Disable the Composition of the Bureau
  -Run this program as an administrator

  One of the above options maybe work on its own, but that's what I had to do to make it work and I tested it after each step.

  Good luck!

• Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  I can't get my Age of Empires 2: Age of Kings drive on my computer.

  It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

  Help, please!

  What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.

• Continuosley floppy drive works, even with no disk insterted

  Original title: floppy drive

  The floppy drive runs continuously with even with no disk in it. Could someone please tell me how to I turn it off?

  Hello

  It seems to be a problem with the floppy drive. It is not related to the operating system your computer. I suggest you to contact the manufacturer of the computer or a local technician for assistance.

  Hope the information is useful.

• where to download the samsung usb driver to use with windows xp service pack

  Please tell where I can download samsung usb driver for use with windows xp service pack 2 for duos samsung galaxi s 2

  http://www.Samsung.com/us/support/downloads

  Samsung download center, follow the instructions on the page.

• Has had a phone call claiming to be "Windows", claiming that my hard drive was contamintaed with viruses (s). Is this valid?

  Call from Microsoft

  Has had a phone call claiming to be "Windows", claiming that my hard drive was contamintaed with virus (s)

  They then read me coorrectly code full windows of my windows disc cover, sounds scary!

  Fake phone calls to technical support

  Calls unrequested telephone of this nature are almost always a common scam. Do not let them give any info, do not give access to your PC, not give them all the money and do not go to all the websites that they suggest. One moment.

  Please see:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  Microsoft issues never not solicited for phone calls of support or security.

  These types of callers can use completely fictitious names or bogusly claim to be of real companies other than Microsoft as well.

• What external optical drives are compatible with the Acer Aspire One with Windows 7 Home Premium 722

  What external optical drives are compatible with the Acer Aspire One 722 with Windows 7 Home Premium OS.  I need to make the backup disks and install the CD software.

  Thank you.

  More external ODD will work just make sure it's an external power source. This allows not to take a lot of power to the unit.