iDRAC6 connection failed trying to connect to the Virtual Console

Similar Questions

• failed to connect to the virtual console (Java) iDRAC7 - PowerEdge r.620

  I am trying to run the Console java applet virtual iDRAC7.

  After clicking through several pop-up windows, die "connection to the server of virtual console...". THE CONNECTION HAS FAILED.

  How to solve this problem?

  -If the machine is PowerEdge r.620 with license full iDRAC (connected via a shared LAN port).

  -iDRAC Firmware version 1.40.40 (build 17), the controller firmware 1.1.1.18 lifecycle

  -Host operating system: Win7 x 64, Firefox 27.0.1,

  -1.7.0_51 Java, set security level to the minimum set of live internet connection.

  -iDRAC settings on the virtual console: type of plugin java =, port 5900

  -ActiveX plugin on 32-bit Windows XP with IE 8 works almost well (IE11 on Win7 is useless because of issue of certificate).

  Do I need a firmware update? Update Java applet?

  Thanks in advance

  -ddbug

  DDDBug,

  IDrac and LC are behind on updates. I would like to begin by bringing current. I have provided links to the 2 updates. To clarify, when you spent native java, it works, or not?

  1.3.1 LC - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r620?driverId=TNJFT&osCode=WS8R2&fileId=3341214911&languageCode=en&categoryId=SV#

  iDrac7 1.51.51 - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r620?driverId=JGG1X&osCode=WS8R2&fileId=3334005292&languageCode=en&categoryId=ES#

  Let me know how it goes.

• When running Disk Management, get the error - failed to connect to the virtual disk Service.

  When I run the Snap on the local server disk management, I get an error message in the status bar: unable to connect to the virtual disk Service.

  Thanks, I have tried these things and nothing has solved the problem.  Here's what I did:

  (a) check the VDS service was manual and failures later per second are 'take no action '.
  ANSWER: Yes to manual and following, second has not changed to "restart the service" of "non-action".
   
  (b) sfc/scannow as administrator
  ANSWER: the System File Checker has found no problem (program reported no problem and findstr/c: "[SR]" on CBS.log doesn't have the list of issues)

  (c) restore to a previous system restore point
  ANSWER: I have tried restore points several more early, each of them failed

• Failed to launch the virtual console DRAC6 Express, error connection failed

  Hi I have mulitple R610 Dell servers that I have configured the DRAC on.

  I can log on to the DRAC and I everything works apart from the Virtual Console.

  When I try to run it I get an error "Failed to connect" immediately, I added the ip address of the DRAC explorers trusted Internet-Sites and all active x controls enabled.

  Can anyone tell what else to try, I also read another article on Virtual Console does not work on DRAC 6 Express is this correct?

  Thanks in advance

  Hi Tommycni,

  Support of virtual console is not given for DRAC6 Express.If, you need to support virtual console, you must install an AMEA map on the server. For more details, please contact Dell Technical Support.

  Thank you

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.

• Unable to connect to the virtual wifi

  Hello

  I can not connect to the virtual wifi via android. on my old laptop with windows 7, it works the same way.
  I created it with commands cmd:
  command netsh wlan set hostednetwork mode = allow ssid = "MySSID" key = "Mykey" keyUsage = persistent
  netsh wlan start hostednetwork
  in the connected connections sound also displayed with internet, but when I try to connect with my GNex, his only tries to connect, but cannot...
  I have the Qualcomm Atheros AR8161 PCI - E Gigabit Ethernet Controller (NDIS 6.30) for Ethernet and wifi: Broadcom 802.11n
  OS: Windows 8 Pro
  You need more info?
  Thank you

  Hi Mike,.

  Try the following steps:

  a. click on properties of your data card (if you use it) connection.

  b. click the 5th tab "sharing".

  c. check box on all the options there.

  d. and reactivate your virtual network via the following command: -.
  
  netsh wlan hostednetwork stop
  netsh wlan start hostednetwork

• VDI connect to the virtual computer with multiple NICs, use wrong address

  Strange question, we are the double of a VM to autoguiding.  Each NIC is on a different network, and it works very well.  Except when you sign out of the VM with a zero client.  If both network adapters is enabled through the vsphere, zero client the client tries to connect to the virtual machine using a wrong address.  He will try to use the address 172.16.x.x, but the life of the virtual machine and is stored on 192.168.x.x network.  Is there a way to make the NETWORK on 192.168.x.x address network card that zero the client tries to connect?

  Using the network-> Advanced-> advanced-> tab connections maps and links, move the 192.168.x.x network adapter to the top of the list of connections.

  Linjo

• Unable to connect to the virtual machine after adding new eSATA drive

  Hello.

  I'm trying to connect my new 2 TB drive in VMWare Workstation. It is connected via eSATA to the host computer, and it works. I added the drive to the desktop as a new "physical disk." But now I can not power the workstation the most.

  (1) when I start the VMWare Workstation it right ask admin (it didn't need before).

  (2) when I turn on the prompt does not charge even the bios. It shows a rear screen with the logo of VMWare for a while and then stop saying: "VMware Workstation cannot connect to the virtual machine. Make sure that you have the rights to run the program and access all directories that it uses and access rights to all directories for temporary files. »

  The host is running Windows 7 x 64. The workstation runs under the standard user account.

  Thank you.

  Hmmm - it's unexpected - works for me here - only difference: I tried with only 1 TB disks.

  You start Workstatiion as an administrator?

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Cannot connect to the virtual store of Toshiba

  Nice day.

  I am from Slovakia. I bought online for my small son Tablet Toshiba Journe. We cannot connect to the virtual store of Toshiba. The worst thing is that I don't ever account of Toshiba's e-store. Unique number I found is the tablet in the user manual and PIN: GMH300087E10. Can you tell me please give access to the store online, but either way or help me to recover the virtual store. Son would be very happy.

  Thank you. Palo

  Hey. Write me a mail, I will send you instructions on the use of this tablet. Online store does not work me and once I have already reset the account.

  Roman

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• whenever I have to connect to the virtual machine asks me to enter login and password I can't save the credentials

  Hi, I used Windows Virtual PC XP mode for awhile and I just do a fresh install, and I'm having a problem that I seem not to be able to solve.

  After you enable the integration features, I got to the Windows Security login screen. I typed in the login and the password, but I accidentally made a mistake and could not connect. I clicked on cancel and was then in the XP login screen, where I entered then the right login and password and it me connected to the virtual machine XP without problem.

  Now, the problem I have is every time I connect to computer virtual it asks me the login and the password on the login screen of XP and I don't have the option to connect using the login Windows Security screen, so it do not give me an option to save my password and login information. So, to make things worse is that moment every time I have to resize the virtual pc it then asks me to log in again.

  Is it possible to return me to the Windows security login screen where can I put my login instead of the XP login screen when it is not an option?

  Hi Richard,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• Connection to the virtual computer

  I disabled the connection to the local network through RDP.

  But I am able to connect through console of the vsphere client.

  How does this work?

  If you disable Network Interface at the level of the comments on a virtual machine or remove completely the vNIC to the VM, it would not affect vSphere Client to allow you to open the Console of the virtual machine.

  examine the console of the virtual machine as if the standard output device connected to your virtual machine. ESXi host running MKS (mouse, keyboard and screen) process for each powered on VM, so opening the virtual machine console is managed by the OS ESXi itself. It has nothing to do with the connection of the virtual machine.

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• Unable to connect to the management console essbase server,

  Hi all..

  After having managed completely the installation and configuration of essbase 11.1.2.3 iam unable to connect to the management console essbase server,

  and also, when connecting to the oracle database, he says 'not found oracle. "

  Essbase 11.1.2.3 is installed in windows server 2008 R1.

  kindly help us.

  OK so Essbase is now running, so you should be able to test a connection through Maxl, run c:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat

  e.g. login password admin on ServerName.

  See you soon

  John

  http://John-Goodwin.blogspot.com/