drive CD/dvd stopped working after it by unplugging / plugging.

Similar Questions

• My DVD/CD drive has suddenly stopped working under Windows 7

  Ive been using Windows 7 for about 6 months now with on any trouble until recently my DVD drive has suddenly stopped working. Windows detects the drive but when I double click on it in my computer it says please insert disc. I find the drive in Device Manager and windows recognises that there is an error that says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I tried to uninstall the drivers in Manager device and rebooted the computer to let auto windows find the driver and reinstall it but to start, I get a message that says:

  Device not installed driver software

  I know that the drive is fine because it works fine in Ubuntu Linux system he worked great in windows 7, so stopped. any help would be greatly appreciated. Thank you.

  Go to the Web site of the factory, download the driver appropriate for your device. Uninstall the driver that is currently installed and uninstall the device in Device Manager. Reboot... After you restart, you have 1 of 2 options depending on how the software is packed from the manufacturing. (A) put an end to the automatic Windows installation feature and use the downloaded software to take care of it for you... If that's how it is set up to operate or (b) wait for windows to auto-trouvez and try to install the device, and when he asked the pilots to open and extract files downloaded to any location you choose and point the installer of windows in this direction.

  Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• my hard drive has just stopped working

  I went to burn pictures on a dvd and got a message saying that I don't have a car to get there. I have a hard drive and used recently. When I go to itunes and try to play a cd, the same thing. When I ran a diagnosis in itunes check, he didn't even see that there is the disk drive. It seems that the computer does not know that the drive is gone. It is a Toshiba laptop with Windows Vista.

  See this response by SpiritX. It is also on the list below in the related discussions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-DVD-CD-disc-drive-has-stopped-working-after-an/1e0ef6f9-132F-4903-8e95-f8fc09f68bcd

  Tom Ferguson

• My CD/DVGW device stop working after iTunes was installed with Apple records.

  My CD/DVGW stop working after you install the program iTunes with Apple records. The letter (e) are attributed to him does not appear in computer (Windows Vista Home Premium), as it was before. Every time the PC is switched on or reboot, a message from Apple saying "AppleSyncNotifier.exe point of entry is not found. The procedure entry point sqlite3_prepare_v2 could not be found in the dynamic library SQLite3.dll. "The HP device proves that this CDROM works. iTunes has been removed, but the apple files are still there. Driver Detective advised to remove the filters from the registry. Only the filters 'less' appeared and has been deleted. This does not solve the problem. Should I delete all Apple records that have been installed with iTunes? This will damage other programs?  Reinstall the driver for this device does not resolve the problem.  !  yellow sign keeps appearing in the parity for this device handler. Systen restore does not a remote date just to put it as he was back. Can someone help, please?

  Hello

  Having too many competing programs from loading at startup CD/DVD can cause these problems.

  Deleted? Or did you correctly uninstall iTunes? Check with iTunes support for complete hair removal methods.

  ---------------------------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• ScrollBar NB100 touchpad stops working after exit full-screen mode youtube

  I have some Toshiba laptops, satellite and now netbook100.

  All share a problem, the touchpad scroll bar:
  It stops working after you exit the full screen in youtube.
  Here's how to reproduce the incident:

  1. with the help of any mainstream browser, start playing a video on youtube, click on the button at the bottom right of the video full screen.
  2. click on [the cross] to exit full-screen. (next to button full screen.)
  3. check if you bar scroll that still work.
  4. a reboot will restore function.

  Currently I m on vista, I think that you will have the same problem under XP.
  The search in google (scroll touchpad bar stops full screen youtube) return more people will share the same question but no answer.

  Environments: win xp all, win vista all.
  All decks, Windows Update driver, updated touchpad driver.

  This is not a major technical problem, but for a netbook, it's very annoying.
  If anyone has this problem or answers, please share it here.

  Thank you in advance.
  Kind regards.

  To be honest, it's the first time I read on this issue.
  I m not a NB100 owner but I have a laptop and I m using IE as your browser and Windows XP.
  I checked this and my touchpad is not working correctly!

  I m wondering if this behavior would appear only the website youtube?  :|

• Re: Satellite A80-135 - during recovery, that it stops working after 10 minutes

  After trying to reinstall Windows from original restore DVD my A80 stop working after 10 minutes of this.

  I tried again several times and the problem is the same. Cannot complete the installation, because is shut down every time after 10 minutes or more.

  Do you have any ideea why this phenomenon happens?
  Thank you!

  Hello

  You should check if the same issue occurs with another disc maybe you could try to reinstall the OS by using the original CD of Microsoft Windows.

  If installation still decomposes at the same point and time then this could be related to a recovery disk scratched.
  On the other hand the laptop could shuts down due to hardware problem.
  As mentioned by Luke, the internal HARD disk bad might work too.

  Overheating could be another reason why the laptop is off.
  Maybe don t cooling modules work as it should and puts it in internal temperature high power off the laptop.

  But these are that some suggestions so it would be really interesting to know if you can reinstall the OS using another disc

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Display driver igfx has stopped working and recovered

  While playing the sims 3 the screen goes usually black then back to the game. then it goes black again and the game will continue once again, the screen is much darker. the darkness of the screen comes and goes and seems to pass the game of light to dark. Sometimes my computer just hangs. After I quit the game, a message appears saying: "display driver igfx has stopped working and recovered." What should I do to stop these pranks of the screen?

  Floop51,
  Take a look at this post: what to post in the forum games and then give us the details of your system and the operating system.   Given that this error is indicating your graphics card you can uninstall\reinstall the most recent driver.  Then clean restart your system and test.  Check the specifications of your video against the requirements of the game card.  If your card is at the very least, you may need to lower the resolution of the game.
  You can also check with the support of The Sims .
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard stops working after you press caps lock.

  On a compaq laptop presario CQ60-300SO the keyboard stops working after you press the caps lock button. The keyboard does not work once the computer starts, but after going in under the keyboard properties control panel and press the 'OK' button, this will work. Buy keyboard works when the computer RECORDS, so I can't get to BIOS. The keyboard work until windows starts and I activate it via the properties of the keyboard by opening the window and press OK immediately. I tried updating the driver but I only find that the keyboard already has the most recent drivers. I tried to restore the drivers and that does not work either. I also disabled start all programs and services to see if it was a problem caused by a program or service and still no luck. It's a very strange problem. I noticed that the keyboard IRQ ranges are both 64-64 and 60-60, which i thought was weird but that's maybe normal. Any advice will be appreciated.

  Hello

  You did changes to the computer before the show?

  Try the suggestions in the link and check if it helps:

  Troubleshoot keyboard

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-keyboard-problems

  You can also post your query on Compaq support forum:

  http://h30434.www3.HP.com/

• Driver Installation module stopped working and was closed

  Hi, can someone help with this error.

  I am trying to install different drivers, but I get this problem "driver installation module stopped working and was closed" and as such, I can not install any drivers...

  Is there a round work or a solution to this?

  See you soon

  Hello
  • What drivers are you trying to install?
  • What were the changes made before the problem occurred?

  I suggest you try to put your boot system minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

• Driver nvlddmkm has stopped working

  Hello people,

  I'm having a problem with my Windows Vista Ultimate 64 bit and my video card drivers. Lets start with the specifications of the system:

  AMD Phenom Quad 2.3 ghz processor
  Corsair XMS 2, 2gig 800 mhz dual channel DDR2 (x 4)
  Card mother XFX 750 a
  Ultra X 3 modular PSU, 1000watts
  GPU GTX280 XFX in SLI (x 2)
  Map the auzentech X - Fi Prelude

  I've been running this PC in single GPU mode with only a GTX280 since January 2009. I didn't notice if yes or no result by adding the secondary GTX280 in May 2009, but the pilots were fault quite often lately and cause more problems than ever. I tried two cards individually, and they both seem to be functional. I've been on nvidia driver 185.85 when this problem started, and I am now under pilot 186.18.

  Here are the symptoms. Whenever I go back to my PC and remove the screen saver, I see an error message waiting for me in the form of a warning (bottom right of the taskbar) bubble warning me that the driver nvlddmkm has stopped working and successfully recovered. I also had a problem from my games once, each of them was riddled with snow/static on the screen, only heavy gaming GPU of course. This problem has been temporarily fixed by rebooting windows, but I also had snow on the screen while trying to watch a movie with Cyberlink PowerDVD 9, in a separate incident. Crysis has had the strange shadows in the graphic durning gameplay, but I tried to play again at a later date with no problems.

  After all that frustration, I tried reinstalling the drivers but was hit with a blue screen of death during the uninstall process. I tried to uninstall again, nothing serious has happened, so I reinstalled the driver nvidia 185.85. I always have the same messages on my task bar afterwards. Shortly after, nvidia has released their 186.18 driver which I installed it. I am always the same question, and this time I tried to play Far Cry 2 and the PC crashed after a few minutes. I played the game for over an hour before without incident, this problem seems quite random and inconsistent.

  I visited several forums online nothing helps. No one there seems to know the solution to this problem. Some of these forums are older than 2 years. Are microsoft and nividia both ignoring us? What is a single Vista problem?

  I've spent thousands of my hard earned money to build this dream PC and this little problem of driver throws all my efforts and money in the trash. I am frustrated beyond belief. Please help me.

  Senvae,
  This is a common problem, and more often the cause are associated with heat.  If you run a lot of power in a case with a single case fan, it is very possible that you have problems with heat.  Even though your graphics cards have their own heat sinks, you must still more air on this kind of material.  I'm sure that your motherboard supports temperature and voltage monitoring so you should be able to install a utility, if you don't have one already, that warns you when the temp or voltage gets beyond the normal limits.  Try to run with the case open to allow for more air flow and / or try to run with only one graphics card.  Both ways would reduce the build-up of heat inside the case.  There could be other causes, but the heat is a very common cause of this error.  Other than that, uninstall and reinstall the drivers, by disabling hardware acceleration, running with a barrette of RAM and disabling Aero Vista theme were all fixes for this error, if it depends on each system.

  Let us know if this information was useful or if you need further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue Screen of Death and stop working after plugging my Razer Kraken Chroma 7.1 (windows 7)

  (Which mean that I speak French, sorry for my English)

  Hi, I have a problem. When I plug my headphones Razer Kraken 7.1 Chroma, awhile, they just stop working. I heard a noise and that they stop working. I must unplug and plug my headphones so I want them to work again. And this thing is happening very randomly! As for 5 minutes, I have déplug and reconnect but some times, it's job for 20 minutes without problem.

  Also, I feel that if I plug my headphones too fast after this problem, the blue screen of death appear.

  I uninstall and reinstall a lot of time, but don't change anything.

  I have 2 computer: this problems happens on my computer which has windows 7, but when I'm on my pc which has windows 10 all work.

  So thanks to you. Sorry for my English ^^

  Logitech Inc QuickCam LVcKap64.sys associates.  Yours is from 2007.  I would completely remove the software and install a new copy of the most recent driver available.

• Audio stopped working after update

  I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

  I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

  In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

  Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

  Hello

  Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

  You can also check:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.