Drive DVD Equium A100-147

Similar Questions

• Mouse and keyboard no longer work after fixing drive dvd - Satellite A100-147

  My DVD Player wasn't working, so I fixed it with the help of some advice from a forum: go to regedit to remove the 'previous' and 'high' or something, I have a catalog specified.

  But then the keyboard and the touchpad is dead in Windows. Nor can I use an external keyboard and mouse.

  I tried to start it in safe mode and with the last settings that worked. None succeeded. Apart from the fact that the keyboard actually works to make choices, therefore, a question Ms.

  Ideas/fixes would be greatly appreciated.

  Computer: Equium a100-147
  OS: XP media center w/sp2 (I think)

  Maybe you deleted the upperfilters wrong or additional / lowerfilters?
  The correct key is {4D36E965-E325-11CE-BFC1-08002BE10318}

  Boot safe mode.
  Go to control panel-> Add/Remove Programs control
  Uninstall all software Mouse/touchpad/keyboard/logitech that can be installed
  Go to Device Manager
  go to view - > click on 'show hidden devices '.
  Delete all devices under "mice and other pointing devices" and "keyboards".
  Reset.
  XP should detect the mouse and keyboard and install the drivers.
  Download and install the driver for the touchpad to the A100 section drivers on the Toshiba site

• Equium A100-147 - deleted CD/DVD drive

  I uninstalled the readers of DVD/CD ROM of my Equium A100-147 model PSAABE by mistake. How I can I restore it? I'm not very technical

  Hello

  It means that your CD/DVD drive is not more?
  Have you already checked the Device Manager if the drive is visible or not?

  Otherwise, you must follow the instructions in this Microsoft KB article:
  http://support.Microsoft.com/kb/314060

• Equium A100-147: can not play games becauce slow DVD player

  Hello

  I have a laptop Equium A100-147. I tried many games on my laptop which should conform to the specifications required for example battlefield 2, however, these games does not work and I didn't know why. I then realized that all the games I tried were all on 4 DVD-ROM drive demanding x, and the specifications I provided with my laptop did not specify what kind of DVD player, I had another super multi layer or something.

  It is while I tried the games that were demanding CD-ROM which all worked fine, I then tried a game that was 2 x DVD ROM demanding that worked apart from a small problem with models of characters not displayed, so I took back defective. Then I tried a 1 x DVD-ROM game that worked perfectly.

  Today, I decided to get my DVD specifications, where I found that my laptop should read 8 x DVD - ROM drives.
  So my question is, is my defective DVD player for not playing more than 1 x DVD - ROM games? And can I contact Toshiba or my provider for repair or replacement or my problem would be something else?

  Thank you, Josh

  Hello

  As far as I know the laptop was delivered with the drive UJ - 841S and the drive supports 8 x DVD-ROM.
  Of course, there must be something wrong if the drive cannot read DVD-ROM media at full speed. The middle is not supported or the drive malfunctions

  What you can do is search for the update of the firmware. Many laptops come with the same drive. See the categories of driver and, possibly, there is a new update of the firmware.

  You can also try to remove the physical drive from the laptop and reboot the device without the drive. Then turn off the appliance, install the drive again and the boot upward.
  The laptop must initialize the firmware again and maybe this will help

  But it seems you notebook is not very old and the warranty is valid. If you need to contact the ASP in your country for more details and possibly for disc replacement

• Equium A100-147 replacement hard drive

  Hello

  I got a toshiba Equium A100-147 by a friend. The only problem is that it comes without a hard drive, because he still destroyed his old hdd to protect its personal and professional data.

  I saw in a local computer store a disk sata hard very good price for only? Â £38 it's a 160 GB w Digital Scorpio 5400 RPM 8 MB Cache S - ATA HDD laptop someone knows if it will work or this laptop does it work-specific hdd?

  Looking forward to any help you guys can give

  Hello

  Of course you need a compatible HARD drive.
  There are two different standards of HARD drive. SATA and IDE

  You need the HARD drive with the SATA interface. I think the original HARD drive was 100 GB.
  So a 120 GB and maybe a 160 GB SATA HDD should also be compatible.

  As far as I know the HARD drive slot was placed at the bottom of the unit and a screw secures the plastic cover.
  It of really not difficult to replace the HARD drive and I think that the details could be found in the user manual.

  Good bye

• Cannot install driver Equium A100 - 147 LAN (ethernet)

  Hello

  I have the same problem, as in the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17316 section.

  I downloaded and installed all the drivers that I needed on my Equium A100-147, but not working no driver Lan (ethernet).

  I have windows XP, home edition, SP2.

  I tried both types of drivers Toshiba download (and a few others also), that should work... but unfortunately, it does not.

  I'd be happy if someone could help me. Thanks anyway.

  Adam.

  Hello Adam

  Thanks for the feed back, but I must say that I'm really confused why you have problem to facilities with driver on Toshiba download page. In any case, the problem is solved and that's the most important thing! ;)

• Impossible to update the setting of DVD region on Equium A100-147

  Hi I have an Equium A100-147 with a CARPET * a DVD-RAM UJ - 841S and I am returning the dvd region 2 region.
  Tried to go through Win DVD, media player and the Manager of devices but not successful on all occasions.

  Whenever I thought I left a change of reference, but when I say yes I want to make the change, that is not the case.
  I tells me that I must use a region 2 media (do) and the administrator (this is me - I'm the only user).

  I now regret letting my nephew use the laptop for watching a region 1 dvd.
  Am not longer under warranty but have whateverhappens coverage of curries.

  Help, please!

  If you check the properties of ODD under DVD Region changes remaining how is noticed?

• Equium A100-147 - where to find the ethernet LAN driver

  Hi all

  I have problems to find the dirver for my ethernet controller...
  I went to the toshiba Web site and on the LAN driver is not finished, he does that with any application to uninstall, doesn't have to install, missing problably...
  I could find on the web...

  I managed to install the wirelles, so I can use the net over there... but I want to install the LAN as well...

  Anyone know where I can find driver (ethernet LAN) Equium A100-147? *

  Thank you very much...

  Hello!

  Have you tried to update the BIOS?
  Check the Toshiba site for a newer version of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Equium A100-147: cannot install Vista because of startup configuration problem

  Equium A100-147 (Windows MCE) bought compatible Vista and bought my promised copy of Vista... used Toshiba step by step DVD ROM upgrade and also updated the Bios.

  Tried to load Vista Home Premium and after going through all the steps, it came with this message...
  «Could not update the computer startup configuration - installation cannot go ahead «...»»

  How should I proceed and what is useful to load Vista.
  Thanks in advance for any help.
  Considers that Howard.

  Hello

  How have you tried to install vista on the laptop?
  Have you tried to switch the MCE to Vista or were you running the new clean install of Vista?

  In my opinion, you must perform a clean installation. Don t updated the existing MCE of Vista.
  In such cases, you can join different installation problems

  If you are an owner of an original MS windows XP CD try to run the console of your windows XP CD recovery.
  Demarrer start from the CD at startup, and then press R to access the recovery console after loading the driver.

  In the recovery console, typefixbootand then restart your laptop.
  Then insert your Vista installation and restart.

  This should solve your problem.

• Equium A100-147: record now and Roxio can't find Recorder

  Equium A100-147 with Sonic, 'Save now' 7 worm, using gives 'NO recorder' and can not find the drive. If no records. I checked the box 'Save' in the properties for the drive but no joy. Also I tried Roxio software but it was also unable to find the drive.

  All of the suggestions.
  See you soon.

  Please check in Device Manager if the cd/dvd drive is correctly recognized.
  Additional if you can find the drive in the Device Manager, you could try to remove it and restart the laptop.
  After restarting the laptop should recognize the device again.
  Then you should check the functionality of the drive.

  I studied a bit on the site of Microsoft for similar problems and found a few interesting sites:
  http://support.Microsoft.com/kb/320553
  http://support.Microsoft.com/kb/314060/

  In my opinion, some registry entries are corrupted.

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Equium A100-147: need a new disc of restoration as mine has been a scratch

  Having a little trouble with my Equium a100-147.
  Tried a recovery from disk and I got up to 75% and recovery stopped.
  Taken to a computer shop to get it fixed and they couldn't do anything because they do not have a disc of recovery in good condition.

  Is there anywhere I can download the image to a different computer, put it on a dvd and restart from that one?

  Contact the ASP in your country and order the necessary CD

  Here you can find near the ASP in your country
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Equium A100-147 has infrared device?

  I'm having Toshiba Equium A100-147 [00800 EAV] PSAABE... is device a infrared?
  What is the corresponding driver for it? How to activate this device?

  Please help me!

  Can you see the infrared sensor on your laptop?
  According to the specifications of the laptop your Equium doesn t have the infrared device.

• Question on the disk anti-shock HARD on Equium A100-147

  Don't Equium A100 - 147 HDD have the same shock of the A120 series?

  Hello

  Sorry, but the Equium A120 is unclear to me. Where did you find information on this laptop and HARD shock anti-mecanisme disc?

  I found some info on the new feature called Toshiba EasyGuard.
  Protection of hard drive (HDD) a feature of Toshiba EasyGuard is designed not to damage the hard drive and disks of data caused by the shock, fall or vibration.
  This feature can be found in the device under the section manager system devices as driver of Toshiba HDD protection shock sensor.
  But unfortunately, I don t find anything similar on the Equium A100

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.