Beep - will not start

Similar Questions

• My Tecra S1 will NOT start!

  I have a Toshiba Tecra S1, that will not start. When powered on it gives me a repetitive beep code. The fan starts, only the power light come ON but the screen remains empty.

  The code goes like this: 2 Short emits a beep then one long beep, pause, then 3 short beeps.

  What is the problem with it and what can do?

  Hi Chris

  Of course, there is a hardware problem. Contact service partner in your country. They may include cela beep code. Unfortunately there is no public document on explanation of code.

• Dell XPS 2710 all-in-One will not start, the totally blank screen

  Hello. This is my first post on the forums and I hope someone can help me.

  The Dell XPS 2710 all-in-one I bought for my 10 year old 15 months ago (Yes, that means that the guarantee is expired) will not start. No no post, no beeps, nothing. Just a brief spark of light on the screen, no words, nothing. The machine gets occasional use, and there is nothing to indicate what could have caused the problem. I have not upgraded the BIOS recently, is not as if it was a bad BIOS update, or whatever it is. I tried to hit the F1, F2, F12 keys delete during startup. No results.

  The video works. I know because I can connect my laptop to the HDMI-in port and I can see the desktop of my laptop very well. So the question is NOT the video. My son uses this machine for occasional movies and homework in his room. I want to fix the computer, if I can. I am handy with computers and built several machines from the outset in the past.

  I believe that the most likely scenario is that the motherboard has went wrong; There are several posts around the internet about motherboards 2710 AIO being unreliable. I saw an ad on the forums of Dell from a guy who said Dell Tech Support replaced its motherboard 2710 five times. I see that some of these motherboards are selling on eBay for around $200. I'm toying with the idea of getting a. I watched the service manual for the 2710 and I'm pretty confident that I could replace the Board of Directors.

  Someone had experience with permutation on their motherboard on a 2710 AIO? Or someone has any ideas on what could be the problem with my son's computer? I appreciate all the advice/help anyone could offer.

  OK, I have removed all the RAM from the motherboard (there were two sticks) and unplug the connector on the SATA hard drive. Then I turned on the machine and got two beeps very strong, but still no video on the screen indicating any form of activity of the POST. The sound signals have been first sounds I've ever heard during the procedure of boot on this machine. I put the RAM back in and re-connected the SATA cable. The way he has been, no video, no post, no beeps. I'm a bit at a loss for what I've decided, this means that the motherboard works technically and that another device on the machine is at the origin of the problem? Have I reason to assume that if I hear two beeps, then I should have the certainty that the motherboard was bad? Given that this a sound signal, the solution becomes cloudy, I guess. I can't help but feel that somehow the BIOS on the computer is damaged. Don't quite know how that could happen, however, because I have not updated the BIOS in over a year. I don't remember what BIOS version I have, but he had been working well for a year with no problems. Thanks for any other help/suggestions you can provide.

• Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

  I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

  It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.

• DV7 will not start

  2 years old DV7 will not start until it beeps just continuously, there is no key stuck, everything is disconnected, there is nothing connected. I tried esc, F8 and F12 nothing happens

  Yes I had to buy the new keyboard... when I pressed the power button, after that 10 sec dv7 started BEEEEEEP... and coutinues over and over again... so I unplugged the keyboard and its order...

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• G5 will not start. LED light on. Fans before working.

  Early 2005 G5. running 10.5.8.

  G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

  Sam

  Some of the fundamental things include the pram/clock battery replacement

  since they may be dead; then with a power failure, sometimes the Mac

  do not restart. Usual power management unit & reset NVRAM/PRAM are

  methods that sometimes also used as a troubleshooting measure.

  • Reset the Mac chip power management: (see SMU)

  http://www.thexlab.com/FAQs/resetpmchip.html

  • How to reset NVRAM-LANDAU on your Mac - Apple Support

  A hard reset can sometimes be used, where the power is disconnected

  the logic board and power removed from grill; Then push the Start button / stop.

  (But maybe not. Several PowerMac computers, I had, some people found this helpful)

  You may also remove and reposition cards and other items

  the inside of the case, to be sure they are connected properly. Be sure to not

  In short anything, due to the static load or residual power in the circuits.

  The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

  can help to put it on again. Also sometimes the power supply has some faulty fans,

  circuits or capacitors, so they can be troublesome to repair or replace.

  Good luck in this case!

• Firefox will not start after update

  Firefox will not start today. I think he had an update yesterday.
  Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
  Renounce top almost ready

  Hello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.

  Fix Firefox problems caused by malicious software

• Carillon of boot loop - start 2011 MBP will not start.

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Check Google for this error, it seems to be common.

  Apparently the startup configuration file is corrupted. These 2 articles can be useful:

  http://www.Hackintosh.computer/?p=67

  https://www.iFixit.com/answers/view/192201/unable+to+open+-var-db-BootCache.play list % 3A + 2

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Why can't I download apps? It remains on "buffer" / operation circle and will not start download

  Why can't I download apps? It remains on "buffer" / operation circle and will not start download

  See if the Restrictions are enabled > usage on your iPhone Restrictions

  If it is not a question of Restrictions, it could be a problem with the network settings on your iPhone.

  Tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password. Tap Settings > Wi - Fi

  Then try to download apps.

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.