Drive hard cooling on Satellite Pro 6000

I have a toshiba SP6000 with Windows XP pro SP2 with heat for the hard disk controller problem. I don't have the problem when Windows 2000 was installed but I don't know if it is a winxp issue or not.

I've tried several things:
-update the bios
-updated all windows/drivers updates
-cleaned my fan and cooler (even turning on tenure did not help)
but nothing helped.

Someone at - it ideas or suggestions?

Kind regards

Jeroen

Hi Jeroen

In my opinion, it can't happen just with an operating system. If there is a problem, it will happen with another OS too. How have you noticed that there is HARD disk controller problem? Is there an error pop up? Your device will turn off by itself?

Tags: Toshiba

Similar Questions

  • Where to buy drive HARD MK4019GAX for Satellite Pro 6100?

    Hi - I need a new hard drive for my satellite pro 6100, MK4019GAX part number. I have searched online but have drawn a blank. Any help would be appreciated. Thanks, Roy

    All devices, you can order from the Toshiba service partner in your country.
    As far as I know the MK4019GAX is a 40 GB ATA-100 HARD drive.
    You can also use an another 2.5 40 GB HDD.

  • Satellite Pro 6000: video controller - driver compatible vga

    Hello

    I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
    That's probably because my video controller is not installed, but I can't find a
    Driver video controller for a 6000 SP. My OS is XP.
    Can someone help me?
    Thank you

    Hello

    You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

    By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!

  • What are Satellite Pro 6000-compatible DVD - RW drives

    Hello

    Can someone tell me which dvd rw is compatible with the satellite pro 6000?

    Hello

    It is always difficult to find information on compatible drives due to different master / slave and c - salt settings.
    In my knowledge don Toshiba user manuals t provide such information. OK, I put t know if all don t user manual provide this, but I've found this info in my user manual.

    However. I studied a little someone suggested that the Toshiba SD-R6372 dvd recorder is compatible with Satellite Pro 6000/6100 units.
    I found this on a very popular online auctioneers ;)

  • Satellite Pro 6000: Base system device driver for XP

    Hello

    I want to install the:
    M - systems diskonchip 2000

    and the:

    Base system device

    On my Satellite Pro 6000 (XP).

    Does anyone know what I need to install drivers?

    Hello JR

    Did you install chipset driver?

    On this page of European driver for Toshiba-> * Archives *!

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  • Satellite Pro 6000: can't find the right WLAN driver

    Hello
    I have re-installed Windows Xp on my laptop Satellite Pro 6000. Everything works except for the wireless connectivity.
    When we look in the Device Manager, I see that the WLAN driver has not (or wrong) was installed.
    Then looked at the Toshiba site for the drivers, but I am not able to find the right one. I found some drivers, which seems to be the one, but unfortunately after installing the drivers, wireless connectivity is still not available.
    Any help would be appreciated.

    Thanks in advance.
    Best regards, Robert

    Hi Robert

    Stand by! Connectivity is not available or the WLAN card is still not installed correctly in the Device Manager list?

  • How can I get a hard copy of a manual for Satellite Pro 6000?

    Hello Forum users

    My brother and I bought my father (at age 81) a Satellite Pro 6000 model PS600E-20EE1-EN on E - Bay for Christmas. There is unfortunately no manual with the laptop. I'm in Australia and my father's in the United Kingdom and he asked me to help to get your hands on a paper manual.

    As I don't know anything about Toshiba laptops or point of sale UK, I was wondering if someone could help. I tried for an hour on the net but could not find a manual to download, which seems to correspond to the above specifications. I guess I could make a phone call international to support the customer in the United Kingdom, but thought I'd try here everything first. My dad would really like a paper, in order to download manual is second best option.

    All the tracks were greatly appreciated.

    Thank you.

    Stella

    Here on this site Web from Toshiba, you can download the manuals for all Toshiba laptops.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=EU

    The manual of your Satellite Pro 6000, you can find in the.
    Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000

    Best regards

  • The maximum size of HDD for Satellite Pro 6000?

    Hi, I am trying to install a 60 GB hard drive, but it is shaped, and it stops at the instalation of Windows XP Pro.

    Is there a size limit of HD?

    Thank you
    Ronaldo

    Hello

    It stops without any error message? If this isn't the case, then try another copy of Windows XP since the Satellite Pro 6000 shouldn´t have problems with this drive. I had 2 years a similar machine and I also got a 60 GB Toshiba HARD drive installed. It worked like a charm, so I can't imagine that the hard drive could be the problem.

    See you soon

  • Motherboard or processor upgrade Satellite Pro 6000

    Hello

    Is it possible to update or change the processor or mother satellite pro 6000 map?
    To have a processor or motherboard faster on this subject.

    Thank you to

    Greg (french guy with bad English)

    Hi Greg

    Good decision. RAM and HARD drive can be upgraded without any problems. Many people think that hardware on laptops can be improved, such as on the desktop, but the design is completely different.

    There are also a lot of other factors that make the upgrade is not possible or very risky. Heat as an example. This is a common problem with laptops. Manufacturers keep all this in mind and the optimal hardware platform design that offers the best compromise between performance and protection of the equipment.

  • Satellite Pro 6000 display turns off sometimes

    Hello

    I hope someone can shed some light on a problem with a laptop Toshiba Satellite Pro 6000 that I can't seem to get to the bottom.

    The laptop has Windows XP Professional installed and works fine, except for the fact that intermittently (could be 5 minutes, maybe 90 minutes) the display screen is what I can only describe as 'blocks '.

    The o/s plant (I ran BACK and Tests of diagnosis when the problem occurred) I would say movement of waves of mouse to the screen and activity HARD drive software continues running, except the screen is unreadable with blocks of color scheme.

    Any ideas or suggestions as to what this could be, and how I could go about repairing it?

    Hello

    It's very strange question.
    Have you tried to update the graphics driver? If not then please select this option.

    Besides if the update doesn't fix this eventually it there something wrong with the hardware. In this case, it is not easy to say what could be wrong.
    In your case, I recommend you connect the external monitor if the problem occurs.
    If the color blocks will also appear on the external monitor so eventually the graphics card or motherboard is corrupt.

    But, if the problem occurs only on the internal laptop display, so I would say that there is something wrong with the display or the FL-inverter.
    In this case, you should contact the technicians to solve this problem, because guys have more experience than each common user like me and you.

    Good luck

  • View fragile on Satellite Pro 6000

    Hi, I recently had to format my laptop: Toshiba Satellite Pro 6000 and model the screen is fragile.

    Please how can I get the right driver, I checked the net but without success.
    Thank you

    All the drivers, you can find on Toshiba download page http://eu.computers.toshiba-europe.com > support & downloads but under product type, you must choose option ARCHIVE.
    All that s!

  • Updated by Satellite Pro 6000 with a DVD burner - technical question

    Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
    He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

    But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
    Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

    Someone here who can help?

    Thanks in advance! lionesse62

    Hello

    You need a special screwdriver to remove the module bay select (CD/DVD drive).
    A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

    I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

    However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

    (1) turn the computer
    (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
    (3) slide the lever and pull place the selectable bay module.

    After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
    The frame is blocked with five super flat head white M2x3 screw.

    As I said, if you can not remove these screws and then ask a technician for help.

    Good bye

  • Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

    I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

    Hello

    All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

    Order of the facilities is as follows:
    -Windows XP
    -Display driver
    -Audio driver
    Toshiba - common modules
    -SD Card host driver
    -SD Card Driver
    -BlueTooth Stack
    BlueTooth - Easy Connect
    -Mouse driver
    -Modem driver
    -LAN driver included with Windows XP
    -Infrared driver
    -Toshiba Power Saver
    Utilities - Toshiba
    Toshiba - post Mobile
    -Toshiba Console worm.
    -Toshiba Hotkey for display devices

    I hope that you will be able to install Windows XP Home edition successfully.

    Good luck!

  • Satellite Pro 6000 RAM upgrade problems

    Apologies for multiple - originally, I put this in the Satellite rather than the Satellite Pro series Forum.

    I have an old Satellite Pro 6000 that has 256 MB of RAM in it, and accordingly, as he tries harder sound, it is not the fastest machines.

    I want to increase the RAM to 1 GB, which I believe is the maximum and 2 sticks of memory of 512 MB PC133 CL3 3.3V, which I think should work fine.

    However, I tried to install either as a pair or separately, with the 256 MB of RAM, and when I put the memory in, the PC resolutely refuses to start. The lights of power lights, but it is only it works.

    I put the original 256 MB of RAM in the slot, and it works fine.

    I'm something wrong or missing something?

    Any help appreciated gratefully.

    Hello

    > Am I something wrong or missing something?
    Of course, you use the memory bad or is not compatible!

    Initialization not after an upgrade of memory is a common behavior if the modules are not compatible or do not work.

    You can upgrade the memory to 1024 MB (2x512MB) max and page Toshiba should run these modules:
    PC133 512 MB (PA3108U - 1 M 51)
    PC133 256 MB (PA3086U - 1 M 25)
    PC133 128 MB (PA3085U - 1 M 12)

  • Satellite Pro 6000: Windows XP installation problem

    Win98SE works well on my Satellite Pro 6000. I put XP on it.
    During commissioning, I see the logo "windows XP pro. But after loading XP, I have no picture.

    Save mode then also does not work, I can't see anything.
    What I've done wrong? It seems that the video driver is missing?
    With the recovery cd is everything works again. (win98se)

    Someone at - it solution to put XP on this laptop?
    Gr. R.

    Hello

    In my opinion, there should be no problem with the use of Windows XP on this unit.
    As far as I know the laptop came with WinXp pro, W2k and Win98SE.
    In this case, all required drivers are available and must be installed in the correct order.
    I assume that the installation and the installation procedure has been authorized. Did you install it on a second partition? You format the HDD to NTFS?

Maybe you are looking for

  • Sound comes only the hollow helmet on Satellite A200

    Hellorecently, I used the headset on my laptop for the first time and after that the speakers no longer working, the sound is routed through the helmet all the time, even if the realtek software correctly tells whether or not the headphones are conne

  • Updates stop on 3/3, forces restart

    Sorry if this has been requested, but my laptop keeps give updates just before going to my office, it says "editing updates: stage 3 of 3 0% complete". " It remains this round 3 minutes remaining at 0%. It rises welcome change by stopping and did the

  • Replaced the motherboard on XPS 8500, now no visible display?

    A week ago, my XPS 8500 just stopped turning. The power button is Orange fixed, which is a problem I've met about 3 months ago. At this point, I ran across a lot of troubleshooting here, replaced the original motherboard, PSU and HDD. I finally got t

  • Question of attribution DSP

    I have 2 fractional T1s (16 B channels), 4 breaks and one 2 FXO ports (I only intend to use one).  While adding slots for the price, I ran out of DSP, so I had to steal some of XCode and CFB.  Now, I have only 4 XCode, 1 WMC and no MTP configured on

  • Sysprep with Windows 7 x 64 and a KMS key

    Hello world Over the next two weeks, I intend to migrate our Windows XP PC to Windows 7 x 64. For the past 8 years, that I followed so far our 350 machines, using 9 master image files, sysprep, and Symantec Ghost to display different images. I want t