Drive recovery (D) - how DO NOT my main drive

Similar Questions

• I see the "H" disk recovery software How to activate?

  HP Compaq 6000

  Windows 7 Pro

  Recovery needs

  a virus (deleted) will not always run right.

  I see the "H" disk recovery software How to activate? Everything has been preloaded and no disk came with it.

  Stated that if there was a software problem was in recovery drive.

  Hello:

  Start the PC and at the beginning of the HP welcome screen that appears, press the F11 key to start the recovery process.

  Follow the prompts to recover PC to factory State.

  If this does not work, then you will need to order a set of HP recovery disks by calling 1-800-334-5144.

  Tell the customer service rep to order a set of fast food for your PC disks.

  You will need to provide the model # and serial number.  The charge will be $10.00.

  That's if the model you have the HP 6000 Pro desktop version.

  Paul

• With vSphere test/recovery replication all while keeping the main site online.

  Hi guys. niot sure if I'm missing something really obvious.

  From what I can understand tha base "recovery process" in vSphere Replication5.1 implies the following workflow

  However, our profession demands that we test the ability to recover the VMs selected the site of DR then than DO NOT impact main site.

  Is this possible without SRM / table to database replication / replication of VEEAM?

  Our installation program

  VCenter PROD (dedicated VLAN x)

  VR PROD device (including VLAN, dedicated)

  PROD-HA and DRS Cluster

  Guest PROD networking (VLAN z)

  DR VCenter (dedicated Vlan X)

  VR PROD device (including VLAN, dedicated)

  PROD-HA and DRS Cluster

  PROD comments Networking (VLAN, isolated, cannot drive to the main site)

  No RS and no possibility to use the replication table according to preverred, no Budget for VEEAM replciation.

  MUST BE DONE, while the primary site remains fully alive >

  Basic procedure to test recovery to DR and come back if I understand correctly >

  1 tasks replication setup (fact)

  2 access to the web in VCENTER DR > Pause/Stop replication on the virtual machines, we want to retrieve.

  3 web access in VCENTER DR > retrieve DR virtual machines using 'recover with the latest changes' (Show stop as primary/Source VM needs to go down)

  3 assuming that it is a path last step 3, we intend to move guests picked up at DR VLAN, one port groups and reconfigure the Ips using Powershell process mass

  4 active Directory and DNS will be changed to Dr. TEST Site to make usable salvaged customers.

  test to DR on revovered VMs in DR VLan 5 users, so this should be route back or affect the site of PROD.

  6 not recovered VMs to the main site. This required once more primal VMs being to low or EVEN be removed from the inventory!

  Procedure here

  VMware vSphere 5.1

  Looks like so there is no way to use vSphere replication to TEST the abilty to toggle, unless you can share the secrets with me.

  If you are using vSphere replication without SRM above it, recovery Test is not available. The process, you can follow in case you do not want your main Web site:

  (1) perform a recovery using the second option (retrieve by using the latest available data). In this way you will not have to power off of the VMs source and your main site will be online.

  (2) when the recovery is complete, stop the replications (which will be in a State of recovery)

  (3) power off VMs recovered, unsubscribe them inventory of VC, but keep the files of disk intact.

  (4) manually configure all repetitions using disks that have been left in the form of initial seeds. This will cause the changes to synchronize.

  In step 4 of ease, you can use the multi-vm replication configuration wizard vSphere. Just make sure that the data store target each disk that will be used as initial copy is put in the folder with the name of the virtual computer. Then, you could try to configure all virtual machines at once, performing the search of seeds and confirming to use.

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• I lost recovery and I do not have disk. Help me, please!

  1. number and product name

  -HP pavilion g4-1016dx

  How can • I find my product name and number

  2 operating system installed (if applicable)

  Windows 7 Home Premium 64-bit

  3. error message (if any)

  I lost recovery and I do not have disc

  For a small fee, you can order recovery from your Support HERE page media

• Toshiba Recovery Disc Creator does not work on my Satellite P300

  Hello

  I need to make my drive recovery for my Satellite P300 (PSPCCA-05V01Y), but the Toshiba Recovery Disc Creator does not work, as it is said that it is not a file on the pc HARD drive recovery.
  I tried before, and he had a problem with the core files, saying he was corrupt.
  So I was wondering if there is in any case I can download the installation of HARD drive recovery so that I can install and put it back to "factory condition" and reburn the recovery disk?
  Cheers for any help
  Mikey

  Hello Mikey

  The situation is quite complicated. When you've got your laptop recovery files was recorded on the second partition in folder HDDRecovery. The second partition and backup files should not be modified.

  If you did something with the second partition or this file recovery Toshiba creator cannot find these files and the recovery media cannot be created. This will work with the factory only settings. but I see another problem there.
  Theoretically, you can now install new OS using the installation procedure of recovery HARD drive and with factory State, you should be able to create DVDs, but if the Toshiba Recovery creator can not find the files I'm afraid that the installation of HARD drive recovery can have the same problem.

  If you want you can test. Try to start the installation of HARD drive recovery.

• I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too.

  Original title: recovery Partition

  Stays of complete recovery partition may not free up any space. I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too. There are 6 total folders on my drive:

  Dell, Program files users tools and windows sources.

  The Windows folder and the program are the most important concerts of 6-7 piece. But when I try to delete them or move only to the recycling it is bin-error right and says Destination folder access denied and I need permission for this action... Any idea would be deeply appreciated. Thank you

  I apolgize if I look tense. That's the way I read your phrase... > if I try yo run an app download anything I get this error...

  I suggest that you contact the manufacturer of your computer. Ask to speak to a technician and explain to that person of the situation.

  I'm afraid that I have no idea why your recovery partition gives you message "not enough memory" If you have never touched him.

  Maybe you'd wait for people with better computer skills to help you.

  Thank you.

• When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  This looks like a utility Acer protect disk hard & possibly also the BIOS.  You will need to consult your manual for Acer.  You have configured a password of HDD that you are now trying to recover, by chance?  This recovery is not possible if the hard drive has been password protected.

  If it was a Windows login screen then it would show your user/admin name and password entry area & would be clearly identified as a Windows form of the version of Windows being displayed at the bottom of the screen.

• How to get the main timeline SWF frame rate?

  Sorry for the newbie question...
  

  
  

  How retrieve you the rate for the main timeline that was created when the SWF file was created.

  
  

  var en = MovieClip (root) .frameRate

  
  

  .. How does not work for me.

  
  

  Thanks in advance!

  The frameRate property is part of the scene...

  trace (stage.framerate);

• How to fix the main button to paste constantly

  How to fix the main button to paste constantly

  Short of getting a replacement from Apple or risk a repair third shop there is nothing you can do. How about a button on the home screen? Go to settings > general > accessibility > assistive touch > on.

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to restore the main menu (modify, display, help ect.)? He disappeared

  How to restore the main menu?

  Hello

  Restore it in what?

  in windows Explorer

  Open it and then click on organize then page Setup then menu bar

  in internet explore

  Right-click just below the address bar, and then click menu bar

  or go to tools in the upper right and select menu bar

• How to show the main screen (home screen of blackberry)

  Hi guys,.

  I need to know how to show the main screen (home screen of the blackberry), even if it's in any screen (like saying "Calculator" etc)...

  This must be done by programming... is there a solution for this?

  Thanks in advance,

  I also had. This is to disconnect incoming call and display the main screen (home screen of the blackberry).

  EventInjector.invokeEvent (new EventInjector.KeyCodeEvent (EventInjector.KeyCodeEvent.KEY_DOWN, (char) Keypad.KEY_END, 0, 100));
  EventInjector.invokeEvent (new EventInjector.KeyCodeEvent (EventInjector.KeyCodeEvent.KEY_UP, (char) Keypad.KEY_END, 0, 100));

• Https security how are not on facebook

  This Https security is on my emails how to not on facebook

  Hello

  Security is defined by Facebook.

  Check with Facebook help and Support and their Forums.

  Facebook - help and Support
  http://www.Facebook.com/help.php

  Facebook - Facebook Contact and support of Facebook
  http://www.Facebook.com/help/?page=835

  Facebook - Forums
  http://getsatisfaction.com/Facebook

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">