I see the "H" disk recovery software How to activate?

Similar Questions

• I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How can I solve th

  I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.

  Hi abgolf3,

  The question may be how the new hard drive has been formatted.  Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage.  Is all the space on the disk are responsible?  If so, take a look at these two documents for your problem:

  Mark a partition as active

  Format a hard drive or partition to NTFS format

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to recover files from the hard disk recovery partition?

  There are recovery (D) on the hard disk.  How can I recover all my old files and programs of this drive?

  Original title: I changed from Vista Ultimate to Windows 7 operating systems.

  Hello sdf361,

  The recovery partition, that is what you would use to restore your computer when you bought it with the OS on it
  that was pre-installed. It is not your old programs and data on it. You will need to backup your data to restore and install
  your programs since the original installation discs.

  If you do not have the program disk, I suggest that the manufacturer of the computer.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite L550D I do not see the "Toshiba HDD Recovery"

  Hello

  I was going to use the disk HARD recovery described here link: http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm when you try I don't see why the "Toshiba HDD Recovery"?

  Hey Buddy,

  You have installed another operating system or is still the preinstalled Windows 7 in Toshiba original?

• Can I recover fom the Toshiba disk recovery programs?

  I have an A350 satellite that came with a Windows 7 upgrade offer that I intend to use. I created recovery disks, but I guess that these only restore an image of the Vista partition and not be able to install all programs accompanying the A350 such as Ulead DVD MovieFactory for TOSHIBA and a TOSHIBA DVD player, is this correct? I believe that I can download Vista 32 and 64-bit drivers from the Toshiba web site and utilities system and these should be OK for Windows 7, maybe around the release date of the versions of Windows 7 for Windows 7 can be made available.

  Thank you
  Martyn

  Hi mate

  Well, the Toshiba Recovery disk contains the image, and that image contains the OS, drivers, tools and utilities
  Usually using this disk, you'd be abele to give the laptop to factory settings to the same State as on the first day of purchase

  So if you didn't receive extra on the disc that contains the Ulead DVD Movie Factory or another applications that software should be a part of the image.

  Notes; your HARD drive will be formatted using the recovery disk all would be erased as the partitions on the HARD disk.

• There is a white stripe on the top of the browser window that covers the top of the screen. I do not see the menu options or navigation, how do I fix?

  There a white stripe about 3/4 inch high in the upper part of the window. I can't enter the menu bar, or see the menu or a browser window or the search bar. When I click on the white stripe, it goes through the office as there is no such thing as the top of the program.

  I've never seen this problem before.

  A screenshot can help

  • How to make a screenshot of my problem?

• Re: Is it possible to use the 2nd disk recovery partition?

  Hi all

  My question is as the title suggests. Basically, I am planning to install an SSD as drive and use my Player Toshiba of origin as in WEIRD secondary car with an adapter. My concern is will I be able to use the recovery of the second drive partition and if I ever need to return to the State of out-of-box will it format and install everything on my SSD or the original HARD drive?

  BTW, my laptop is L755-1 DR.

  Thank you
  DJ_TLG

  I can't say for sure but I'm 99.9999% sure that this will not work. When you change the hardware platform (SSD and HDD) HARD disk recovery Wizard will not be able to find the image of recovery due to lack of specific markers.

  Create the restore DVD disc and the problem is solved. Of course do this with original laptop hardware configuration and factory settings.

• Failure of the HARD disk - recovery disks ordered

  Hard drive had a mechanical problem. Has ordered the recovery of the DVD system. acquired another HARD disk. Swapped the readers put the diskette 1 of the dvd and follow the steps. It passes through reformatting Windows partition part fine and even ask for the #2 disk. He began the resettlement Original content and gets BSOD...

  PFN_LIST_CORRUPT

  Technical info: 0X0000004E (0X0004EE3B, 0X0005685A, 0 X 00000007, 0 x 00000000)

  Tried 3 times now with the same results

  Thanks in advance to anyone who can help with this question.

  Dave

  If you have 2 sticks of memory trying to remove 1 and try the recovery again. If it fails again swap on memory and try the other...

• My pictures on my card do not show in the import module, but I can see the names of files. How can I make my photo visible?

  I try to import images from the camera or via a card reader. It seems that something has changed. The image is not visible in the import module, but I can see folder names (date) on the map.

  How can I make my photo visible?

  Thanks for the help!

  Dear Akash,

  I have lightroom 5 and sony A77 M2. Finally I solve it myself investigate other positions on the internet on the same subject. I clicked on the part of area of "copy of area" (right of the screen) to the modus of import and the images showed once again. Still don't know why the pictures disappear and hope it was just something that I was wrong somewhere. Before I had multiple tasks (moving files) in the background may cause pressure on system/software.

  Thanks anyway for the reaction

• With the help of the utility Disk Recovery HD

  IF I use recovery disk HD utility to repair the hard drive, I lose my files? Should I do a backup first?

  No, you shouldn't lose your files... However:

  YES, you should always have a full backup.

  Glitches to occur.

• I deleted the Windows Disk Defragmenter. How can I reinstall it?

  I deleted by mistake the defagmenter (in tools) I have window ave XP How can I recover it? because my computer was delivered without cd

  original title: I deleted by mistake the defagmenter (in tools) I have window ave XP How can I recover it? because my computer was delivered without cd

  What did you do to remove it?

  If you go to start - run - type dfrg.msc and click OK the Disk Defragmenter opens?

• Back to the top and recovery software

  Recently Dell backup and recovery to start software popping up messages asking if I wanted to go to a Pro version of their software for about $60. When this message appears in the taskbar, my computer is slowly coming to a grinding halt. Usually, I have to restart my computer and I get about a few days to a week stay. But ultimately, this happens again. I can't find any settings to stop this.

  If Dell won't give me their best software products after I have spent more than $1,000 for their system, then at least do not sabotage my system to use a lower quality product.

  My solution is to simply uninstall the lower software and quit using the Dell software anywhere on my system (as appropriate).

  What I would like is to use the Dell software but without it crashing my system when it checks the updates. Any suggestions? I run Windows 8 that came pre-installed on my system (Inspiron 660).

  Thank you.

  several method to DISABLE the update... way DELL easy - win key + X-> run as administrator-> type msconfig-> enter->

  I prefer to disable for the service... When you restart is automatic EXTINCTION will be, or you can disable in the Task Manager.

• New OS displays cannot see the virtual disk drive

  I am creating a new of Windows XP virtual machine on a standalone ESX Server using local storage.  After crossing the start of initial installation and learn how to "To install windows press" the next screen says

  «the installation program found no hard disk units installed in your computer»

  I read in a few places this may be due to the poor selection of bus or logic LSI logic when creating the virtual machine, but I tried them both and they both have the same error.

  Is it possible that the problem is the installation media that I use?  Other Installtion disks seem to find storage that I installed a 2003 server.

  Yep for XP, you must:

  VM-> change settings-> disk-> existing Floppy image in the data store-> Browse-> vmimages-> disk-> vmiscsi *.flp

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• Can I use the same disk of software on several computers?

  I installed Windows Vista on a second computer.  The disc was used to install on another computer.  On the second computer, from time to time, the screen becomes unstable and begins to try to post the same request twice on the screen in overlap and becomes uneven, showing part of the two, flashing and showing things on the spot.  After that, it becomes impossible to use the application without end the session, or restart the computer.  This usually occurs after the computer wakes from sleep.  He has also taken over when a box saying that the computer key is already in use.  Let me say only that a new Apple computer.  What is my problem?

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  See you soon.

  Mick Murphy - Microsoft partner

• See the list with dividers collapsed: how works?

  I need to make my list from dividers view collapsed, there is an dividersCollapsed attribute:

  

  Hi Ben,

  You can point the dividers attribute has collapsed to a managed bean method. This method returns an array of String.

  For example, I created status as the divisor attribute. It has three values - INPROGRESS, OPENED and CLOSED.

  Now I set attribute dividers collapsed as follows using the language of Expression: #{pageFlowScope.ManagedBean.collapsedStatusArray}

  This method is in my managed bean:

  	public String [] getCollapsedStatusArray() {}
  	S string [] = new String [2];
  	s [0] = "OPEN";
  	s [1] = 'CLOSED ';
  	return s;
  	}

  So open and closed dividers are loaded as collapsed.

  But INPROGRESS is developed.

  See image below:

  

  I hope it helps.

  Kind regards

  Deepak