Driver ATI - something missing

Similar Questions

• Question about driver ATI for Satellite A60

  I try to scan my PC: Toshiba Satellite A60 the driveragent.com and the result is:
  http://DriverAgent.com/driveragent_results.php?HWID=3398ca2cff2f976c63feb c0403dcb86e & n = 8562751 & PHPSESSID = 996c598e28ed091353 506e834b351b34

  Unfortunately, I can't find that missing reported driver:
  ATI - controller PCI IDE Bus Master
  I search on ATI, Toshiba and Microsoft sites and nothing!
  I am using Windows XP Professional with SP2

  Can someone cause this problem?
  Someone at - it a solution?

  Hello

  Looking on the European driver Toshiba page?
  There is an AGP-ATI driver screen. You must download and install it.

  I assume that you have not used the Toshiba Recovery for the installation of the OS CD. Why?
  On this CD, all drivers are pre-installed and it s a better way to install the operating system.

  But if you want to manually install the OS you should do it in the right order.
  The Nice installation instruction is placed on the driver page.

• HP 15-r240tx: wireless card driver not install (missing)?

  Hello world

  Recently I bought HP 15 - r240tx (FREE DOS) from Flipkart, I installed windows pro 8.1 as soon as I received the laptop.

  I downloaded all the drivers from the HP driver page and installed most of them.

  My nvidea, audio, display, usb etc drivers work fine but my Wireless card is not.

  I tried the realtek driver, but it is said that the network cable is not connected.

  "" On the help desk, it gives the same error: "connect a cable Ethernet in this computer"

  Also the button on the wireless keyboard is always on (white) and never goes.

  I'm confused, am I missing a driver or something? Can I still a wireless adapter?

  I would be happy to provide more information...

  Thank you.

  Hi @Gauravdeep .

  Thank you for your response.

  Your network card should not be listed in the other category.

  I suggest that you remove the network device and unknown in the other category.

  Then search for the hardware changes.  This should then list the network under network adapter.

  Once this has been accomplished, ran the HP Support Assistant to find the drivers for your network card.

  Good luck!

• Windows 7: A cd to dvd device driver I'm missing?

  Excuse me..

  I have problem with win7, the problem is that after the victory to Flash successfully make my bootable flashdisk, then I plug the flashdisk on my 110-3500 HpMini, but after starting Setup win7, a box pops - up and theres something written there that "a required cd/dvd drive device is missing... blah blah..." Is there something wrong with my HpMini? I tried to cancel the program installation and then re insert it to another usb port, but it did not work... Please help me sir... Sorry for my bad English...

  The wireless switch is on the front on the right side in the opposite of the power switch position.

  Windows Dvd installers are much more likely to become corrupt than ISO files or installers of USB. They are not indestructible and are best kept in a DVD box for safekeping.  All it takes is a simple scratch on the label of the DVD side and toast.

  Disc info you provided are identified as a Western Digital Scorpio Black SATA2 320 GB hard drive. What is the product number and the name of the product of your mini?

  Best regards
  ERICO

• Re: Driver ATI Installationsur Satellite C660 1 - EF

  Greetings!

  I have a problem installing the ATI vga driver. I know that only drivers from the Toshiba site may be used, but they do not work yet. I have a Toshiba Satellite C660 laptop 1 - EF with ATI HD5470 and Windows 7 SP1 x 64 installed. I bought without OS, so I did not all discs.

  After I installed it (clean install) of the OS, I have seen that some devices had been installed with the drivers built into windows (or not yet installed). So I decided to download the proper drivers. The first problem is that I couldn't find the driver ATI for W7 x 64 on the Toshiba site for this type of laptop. I tried to find a similar notebook that has the same graphics card. At least I could find a driver. But when I tried to install it, it was closed. He did nothing, just closed.

  Since then, I've tried several drivers (most of them that I downloaded from the Toshiba site), but the result was the same.

  What should I do?

  Hello

  It's good for Win7 64 bit ATI display driver.
  Can install you it?

• Material of A100-529 - update driver ATI - satellite not supported

  Hello

  I have Toshiba Satellite A100-529. It has ATI Radeon Xpress 200 M graphics (integrated on board). Driver Toshiba being old (02.2005) I would like to update. I went to the ATI site, downloaded driver for my pilot x200M (last 7.1) and...
  WHEN install he said I have hardware that is not supported by this driver...? ! ? ! ? !
  I've tried everything. First uninstall the old driver - nothing. According to an older version of the driver ati 6.7, 6.8, 6.12 - nothing. the same error. Then I tried the driver for the ati card normal - nothing, next ati mobility driver - the same - hardware not supported?

  I'm depressed. A week ago, and I can't update my ati card driver. I even tried the so-called MODTOOL - for some other laptops. NOTHING!

  Help, please!

  It is important for me!

  Hello

  Try the driver for Satellite A110 (PSAB6). It is also not the most recent one, but better then your old.

  Good bye

• Driver ATI for A300-15 a acting strange - windows XP

  Hello!

  I got Satellite A300-15 a PSAJ4E with windows XP SP3. I downloaded all the drivers from http://www.toshiba-europe.com/.
  Everything works well except the driver ATI Radeon HD 3650. When I install windows get some strange colors. I.e. welcome letters on the start screen have orange background? The nuances under letters are orange (no matter what theme I use). Links in Firefox are orange or red... it works fine but seems strange...

  The problem is that I can't find any other driver to install. If I download driver driver ati or omega he says it does not support this model. Actually on ati pages there is no drivers for newer than x 1800 mobility Radeon.

  Is there any other driver for download or some other advice?

  Thank you!

  Hi, I also A300 but 15 k with Ati 3470, you need to download the latest drivers from ATI (8.7) web and mod them to this http://www.driverheaven.net/modtool.php tool and then install it, if it will not work that manually choose the INF of unzipped Ati drivers, it works for me...

• Need driver ATI MOBILITY X 700 for Satellite M70

  Heyya here :)

  So I want just to renew my old driver ATI MOBILITY x 700, it is now v6.14 and when I checked the site driver ATI, they have the latest one, v7.12. But the driver did not work on my laptop Satellite M70. It runs first validation to check if they can install the entire driver in my system, and it just says: "thank you for your interest in CATALYST, unfortunately, this software update can not be installed on your system, please contact the manufacturer of your laptop for the driver updates.

  Then I managed to get in this site, and I can't find what I need here: (.) So, my question is, does anyone know where I can download a good driver for ATI MOBILITY x 700 driver on my M70 laptop?

  Any help is appreciated and I will give you the cookies with icing on top for that :)

  The graphics driver ATI Toshiba for Satellite M70 can be found only here on the European driver Toshiba page.
  Unfortunately, the newer versions are not available. :(

  You know the * www.omegadrivers.net * site? There are a few 3rd party ATI drivers. But note; This driver can be installed only at your own risk, because no one can guarantee that these non-Toshiba drivers would correctly on Toshiba laptops.

  Best regards

• Which driver ATI and catalyst I need for Satellite L300D-10B?

  I use a laptop Toshiba L300D-10 b (_ Windows Vista Home Premium 32 bit OS) and I tried to update driver ATI (I use * radeon ATI * X 1200 * Series)
  So now I have a problem with the Catalyst Control Center (+ catalyst control center host application has stopped working +).

  Can you tell me what ATI driver do I need and how to download?

  For laptops is always recommended to use drivers supported and tested. These drivers are only offered by the laptop manufacturer.
  Have you installed a driver for ATI page?

• HP pavilion 15-n248sa: a media computer driver needs is missing on 8.1

  "Sorry I have European account.

  Hello I have a problem, I used before archlinux now I want to reinstall agaion windows 8 in my 'Hp Pavilion 15-n248sa' hp, and I have problem during the installation I get an error

  "

  A media computer driver needs is missing. It could be a driver DVD, USB or HDD. If you have a CD, DVD or USB flash drive with the driver on this subject, please insert it now.
  
  Note: If the installation media of Windows in the DVD or on a USB drive, you can remove this step. »

  I look at the google and I found that I have to change usb 3.0, USB 2.0, but I don't have this option in bios...

  Also, I tried to load sata but it seems that the sata is not going... I will be very greatfull for help.

  Sorry, that didn't work.

  Are you sure have installation media good?

  Normally, you get this error when the installation file is not complete or corrupt.

  The driver ahci for the Pentium N processor does not exist.

  You can try the one I've attached below which I derived from the chipset driver, but I think Miss me the part of it.

  However, it was what he was in for this chipset chipset driver file.

• my floppy drive A: drive / disc is missing...

  my floppy drive A: drive / disc is missing... not found... where it's going and how do I get it back... I still have the location on my lap... I use a xp media center sp3 2 k 5, I just do a fresh install, but it was gone until I did it. system also has a few other probs as tv is not on the menu in media center.

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer Dell Inc.
  System model Dimension XPSGEN5
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 3399 Mhz
  A04 BIOS Version/Date Dell Inc., 29/11/2005
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Username
  U.S. Eastern Standard Time zone
  Total physical memory 048,00 MB 2
  1.31 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 3.85 GB
  Paging file C:\pagefile.sys

  Downer on the photos based diskettes. I remember my father having a Sony camera with a floppy drive. I don't know that it seemed like a good idea at the time.

  Your tuner has worked with Media Center? Videos have already played? What format are these videos?

• How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

  How to fix my computer told me windows cannot load a system driver reviews being missing or damaged

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• CD/DVD driver damaged or missing. How to get the new driver?

  After working well for 3 months my CD/DVD drive does not show in my computer.  It appears in Device Manager.  Display properties Drive watch Code 39 driver damaged or missing.  Try to update driver says driver is installed and up-to-date. Said driver driver search comes with Windows 7.  How to get and install a driver right?

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry Smartphones purchased the "shield Invisible for BB 9530" - something missing

  Hi all on the Forum,

  Yes, it's true, there was something missing in the package. I have BB 9530. I went to Best Buy, which is 2 hours of me buying the "Invisible Shield" by zagg. In the package, there is a mini squeege, the new film of the shield to fit on the face of BB 9530 to protect and finally spray for the application of the shield.    Guess what, spray tube was nothing in it for the spray material.

  I'm not complaining, just want to know what are your impressions? Its I don't believe telling someone the vaporizer is bone dry. Purchased from Best Buy 2 hours for about $24,00. Thanks for your thoughts!

  Sincerely, Timwa100 have BB 9530, aged about 2 weeks.

  I call the store and let them know what is happening and the length of the walk, you may get a credit in store or discount. Alternatively, you can use any small bit of SOAP liquid and water in the spray bottle, I did myself, during the replacement of protective screen. Just be sure to spray the plastic not BB.

• Driver ATI FireGL 5700 catalyst for windows 8

  Where can I get a driver ATI FireGL 5700 catalyst for windows 8 for Thinkpad W500

  Thanks for the quick response and the tip.

  Interestingly, enough I tried compatibility mode and widows 8A suggested to use the XP Sp3 mode as administrator. Of course, this does not. Msoft should consider the issue.
  My Widows 7 Ultimate catalyst ATI FireGL 5700 driver worked fine on windows 7 with the index of Performance of 6.2.
  When I've upgraded to Windows 8 Pro he installed generic Intel Driver and and just crawl!
  Index fell to 3.4!
  I have Intel Core 2 Duo T9600 processor 8 GB of RAM so I was astonished, as I do a lot of photography.

  I was ready to come back to Win 7 Ultimate but I followed your instructions and uninstalled ATI Catalyst and reinstalled it with the file properties on the compatibility of Windows 7 that you said.

  It worked, and the Performance Index is a little slower than Win 7 to 5.5 but acceptable.
  Start-up and all graphics are faster and much better experience. As my son says he is now "Snappy."

  Thank you for your quick response and I hope this helps other people who are in the same boat.
  AMD needs to update a specific driver for Windows 8, as he must have millions of users who are pulling their hair out in frustration.

  Otherwise Windows 8 is great step forward and I hope that Microsoft managed to fix all the glitches that mar a great product otherwise.

  Take care