Support driver does not"say"windows is looking for a solutiondriver problem

Similar Questions

• I get a pop up window saying windows is looking for a sonic Update Manager file

  original title: unsubscribe

  I get a pop-up window saying windows is looking for a sonic Update Manager file (said scan.msi) and can't find it - he is constantly back and forth w/Setup attempt and then returns to "Please install the scan disk file" which I DID not!  How can I get rid of this, and which upped in the 1st place?  Did not request a scan?  I am using iolo System Mechanic installed by Dell and do not know if something in this program attempts to run a scan, but it's very embarrassing to have these pop up screens constantly fight w/each other - I tried to cancel out of them, and they just continue to flow upward again and again.

  E-mail address is removed from the privacy *.

  Hi Barbara a Woodin,.

  1. did you of recent changes on the computer?

  2. do you have sonic update manager installed on the computer?

  If you have Sonic update manager installed on the computer, then check out the link below and try the steps mentioned them, check if it helps.

  Update Manager (Service) issues and resolutions

  For further assistance, you can post your request in the community forums of Roxio.

  http://forums.support.Roxio.com/Forum/105-Sonic-applications/

• Does not install Windows SP 2 for Vista

  Installation of service pack 2 Windows was not successful, error code 80070490 x appears, I tried several times to include too many disable my Norton Antivirus

  Hello

  "Windows Update error 80070490"

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  The Microsoft Information for the error code 80070490 is in 2 parts.

  1. download and install the Microsoft System Update tool

  http://support.Microsoft.com/kb/947821

  2 repair Windows if above does not correct the problem detailed in the first link.

  See you soon.

• Something is blocking some games and I get an embarrassing box and it says windows is looking for a solution and I have never one, I can not also close the programs it goes well.

  Also told me that I have to install a new version of silverlight, what I've done three times and he always tells me to install a new version of silverlight, I clicked also paper painted Steves and blinds to watch something my sister wanted to, I think that is where my problem started because I never had ads for this before and now the games I can't play on pogo have an announcement of Steves blinds and wallpaper and when it counts up to game it stops in 18 seconds or goes to zero hour, but never loads.  Please help me.

  Hello

  Which browser is installed on the computer?

  Perform the steps from the link mentioned below if you have Internet Explorer installed on the computer.

  The problems of games online using Internet Explorer

  Hope this information helps.

• Safari does not display the images (looked for fix, tried many things, can't find one that works)

  Hello

  My safari will display all the images, for example Google Logo, image profile of everyone here and much more.

  So I was wondering how I can fix this problem?

  Either way, I have 3 accounts on my computer, works on the other two, but not mine.

  Thank you!!!

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Menu "develop" will appear in the Safari menu bar.

  Click 'Expand' in the menu bar and make sure that 'Disable the Images' is not enabled.

• keyboard driver and the mouse does not, uninstall driver does not work, any ideas?

  Just bought a sony vaio and have the driver of keyboard and mouse not working, uninstall the driver does not work, no idea how to solve this problem

  Hello

  Exactly how you are trying to install the driver?

  We will analyze and identify the cause of the problem. You can connect a keyboard or an external mouse and check.

  Method 1: Hardware store.
  

  Run the troubleshooter of material and check if it works.

  Follow the steps to run the Troubleshooter:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, type Hardware Troubleshooter in the optionSearch .

  d. click convenience hardware store to run the troubleshooter.

  Method 2:

  You try to install the drivers on the manufacturer's Web site and check with the question.

  http://www.Sony.co.in/section/support

  Note: Search the driver by using the model number and download the latest driver.

  Reference:

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-in/Windows-8/why-isn ' t-windows-conclusion-device

  Hope this information helps. Response with status so that we can help you.

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Standard VGA driver does not load when reinstalling Windows XP

  Reinstalled Windows XP on my computer, but he doesn't not load the driver VGA Standard - so I can't install the video driver ATI Radeon x 600 for my graphics card.

  In Device Manager, it shows (in yellow) in the other devices section, "Video controller (VGA Compatible)".  I tried to update / install video driver with the Windows XP installation CD in the disc drive, but whenever he says, can not update material.  Whenever I start, the Found / installing the new hardware box arrives, but after a search, he finds no driver to install the video card.

  Of which I did some research on the web, I need to load the Standard VGA driver before adding any other drivers (IE, ATI Radeon x 600 video driver) - but Windows XP does not say the driver VGA Standard of its installation disk.  Help!

  I have not yet tried reinstalling Windows XP again, FYI.

  Hi people,

  You could try to remove the "video controller" in the section other devices in Device Manager, then restart the computer.

  Who needs to be reinstalled card generic video driver.

  However, if you have the correct video card driver, you should be able to reinstall this driver from Device Manager.

  Right click on "Video controller" entry and go to the "updated driver software".

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Its satellite A210-131 driver does not support DirectSound entry

  From Premiere Pro CS3, an error message is displayed:

  -"Der zurzeit installierte Soundkartentreiber unterstuetzt keine DirectSound-Eingaenge"Es ist keine Audioaufnahme possible".
  -"The its installed card driver does not support the entry of DirectSound. The sound recording is not possible.

  Please help me find a working driver. Operating system is Windows Visat Ulimate.

  Thank you
  Siegwin

  Hello

  To my knowledge the DirectSound is an addition to the system of Microsoft DirectX. It should be included in DirectX.
  Please check if you have installed the latest version of DirectX 9 C.

  In addition, I would recommend updating the audio driver. On the Toshiba page, you can find the latest two versions of Realtek sound dirver;
  -6.0.1.5374
  -6.0.1.5406

  If the two will not support the DirectSound input try another on the homepage of Realtek.
  The chip is called Realtek ALC268

• Satellite 4000CDS: Windows XP OS - graphic driver does not

  I got my 4000cds Satellite some time ago, but I have recently installed windows xp on everybody says this does not work, but it worked for me fine with the exception of the graphics driver.

  Hello

  Well, this unit is an oldie and was not shipped with a Windows XP.
  That's why I find graphic drivers for WinXP on the Toshiba driver page.
  I studied a little on the net and it seems that this device has been delivered with a graphics card of the chip & Technologies VGAC B65555.

  You can try to googel some driver for Xp, but I don't know if you can find something useful.
  However, you must be a happy man that WinXP works on this good old classic and you need ONLY the graphics card driver.
  If you do not find a compatible if you use the standard driver for Windows XP OS.

• Card error"video or the driver does not support alpha separate mixture, glow will be disabled" when running COD4

  Original title: VGA

  When I run COD4 it says ' error during initialization: video card or the driver does not support alpha separate mixture, glow will be disabled.
  No idea why this is happening?

  There are maybe a few settings in the options/preferences menu of COD.  Your best way is to ask in a support forum for COD.

  In the future (or), before you buy a new game, visit Can You Run It to see if your hardware supports the minimum requirements of the game.

• My DVD drive does not appear in Windows Explorer

  This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD.  No DVD, CD or even disks with files stored on them.
  When I open windows Explorer, the drive from DVD (e) is not even more appear.  I was wondering how to fix this.

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Do not use the Brink game on my computer laptop-message of error: the current video card/driver does not support openGL3.1 or newer.

  I bought this game for my son who has installed ok. But when pressed on play error message: the current video card/driver does not support openGL3.1 or newer.

  We have Windows Vista SP2. Does this mean I now have to buy a video card or y at - there a way around this without costing me more money?
  Kind regards
  Sam Towle

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: make sure the game is compatible with your computer.

  Method 2: update the video card driver and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  If both methods fail, you will then need to get a new video card.

  I hope that helps!

• Windows Media driver does not load code 10?

  anyone has this problem

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager

  The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer.  The door is not ejected.  You must use a paperclip, poking into the hole to open it.  I also re - it sitting, but it changed nothing.  We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II.  Installation failed and it has messed up also the DVD/CD drive.

  We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.

  The specifications of the laptop are:

  HP Pavilion dv7

  Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2

  4 GB OF RAM

  64-bit Windows Vista

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.