driver does not load
My TssT SH-S203N sata dvd rom driver does not load. He had worked.
There is a top exclamation point in Device Manager
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Tags: Windows
Similar Questions
-
Tek TDS2014 driver does not load as a reference vb6.0
Downloaded the latest version of the pilot site TDS2014 NOR (ver 2.7.1) and it seems that there are no typotheque so it does not load as a reference in VB6.0.
I had an older version (2.0.9 dated 2006) which was able to load as a reference but started having problems with it after the NI-VISA 4.5.
First, is there a library of types available for this driver I'm somehow missing or is there the intention to support VB6 on the new driver (at this point, I'm not wan't to create based on the .h file)? Otherwise, there are the old versions available with a type library that I can get to try?
If I can't help with that, the real problem I had with the old driver after upgrade of VISA is that I can not put the Horizontal attribute to time Record to 1usec with the driver tktds1k2k_ConfigureAcquisitionRecord function (corresponds to a setting of the scope of the 100nsec/div). All other settings seem to work, here's the log of NOR-SPY for setting 100nsec/div:
viPrintf (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HORthe % EC")
Formatting viWrite (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HOREC: .000000e-08 ', 20, 20)Note the value sent in HOREC order is damaged, must be 1.000000e - 07
Here is SPY for the work of setting 250nsec/div:
viPrintf (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HORthe % EC")
Formatting viWrite (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HOREC 2.500000e - 07 ', 20, 20)Because it worked before upgrade VISA that I was trying to exclude imcompatability problem with former driver. Are there known bugs 4.5 VISA who will account for this? Also, I am able to put 100nsec/div with VISA sign using the SCPI command, so the question is not in the scope.
My last config is:
Windows XP
NI-VISA 4.5
NOR-IVI 3.3
tktds1k2k_32.dll ver 2.7.1
For now, I'll try using WriteInstrData and send SCPI directly as a workaround.
We will publish the updated driver (2.7.2) to focus on the problem of type library. Please let us know if you still have questions.
-
At the start, driver TPkd does not load. (A Windows driver?)
Restart takes<3 min,="" startup="" takes="" 2hr45m,="" tried="" standby="" but="" it="" timed-out="" overnight="" and="" took="" nine="" hours="" to="">3>
There are six other error records everything (same as & daily) "services could not start (3 files, 3 trails) in the 'hidden files and folders' - want to see?
So, I did not have a restore date to come back because I have 'cleaned' too much.
I don't know how to reload a Windows or a part of it even if I had a disc for this.
Can you help me or do we not have to buy another computer?
MBJ
Hi JackandMiriamJenks,
I suggest to start the computer in safe mode with network and try to download the update of the article mentioned.
See the link below to start in safe mode:
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Update for Windows XP (KB926255) security
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13220
I hope this helps.
-
Driver does not load correctly
Some time previously, I've updated my HP Officejet 6480 all in one software and since then, the drivers do not load correctly. Whenever I start my computer I get an error while loading programs are. It is said that a driver has not loaded correctly. I am running Windows 7 home. It may have started when I upgraded to Windows 7, 64-bit XP and loaded the new software from the HP website. I don't remember exactly. Today I tried to send a fax from the solution Center and found that the "Send a fax" button is irrelevant. Since I am able to send faxes from the buttons on the front panel on the printrer, I guess that the driver does not properly is the fax driver. All other functions work. I uninstalled the software from the control panel in Windows 7 and downloaded and reinstalled the software several times without success to resolve this problem. Any ideas how I can fix this problem? Thank you.
Hi Dave46a,
Welcome to the HP Forums!
I see that you have trouble to install your HP Officejet 6480 to your Windows 7 PC.
I would try the following:
1.) use Microsoft Fix It to uninstall the software. Select Windows, click on install or upgrade software or hardware, click on install or remove programs, and then click Run now next to correct problems that programs cannot be installed or uninstalled. (Use this to remove the printing software).
2.) try using the printer HP install wizard for Windows for the re - install.
(3.) to run the HP print and Scan Doctor to see if other errors occur.
Hope this helps and have a nice day.
-
HP DV7 - 6C95DX Intel Centrino Wireless N + WiMAX 6150 driver does not load
Hi all
Just bought the laptop today and did a fresh install of Windows 7 Pro 64 bit. Everything is OK except the wireless Intel Centrino N + WiMAX 6150 driver will not load. All the other drivers loaded without any problems. I downloaded the driver from the website of th HP, I have download the driver in the Intel site and always used to install. It's very strange because when I run the driver from the Intel site, it has finished installing, but in Device Manager, I always get a "!" mark next to the device. My wireless adapter works it is what I use now to connect to internet.
I even tried unnistalling Intel PROSet/Wireless WiFi software and re - install it and still the only one who does not install properly is the "Intel Centrino Wireless - N 6150" and "Microsoft Virtual WiFi Miniport Adapter" and the "Microsoft Virtual WiFi Miniport Adapter #2".»
Can anyone help me, it bothers the heck out of me.
Thanks in advance
Here is the driver [content deleted]
-
Dolby audio driver does not load after upgrade Windows 10
Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)
Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.
Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.
-
Windows Media driver does not load code 10?
anyone has this problem
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
handycam sony USB driver does not load
I have a vista and xp systems I also have a handycam sony usb drivers work on xp but not on vista. If I have win7 I will be able to use my handycam dcr-trv250 of usb?... .drivers does not load...
anyone can answer this question? I don't want to waste money, but if I win 7 I'll be able to do my work equipment? or will I be able to load my drivers to use? can someone make me to * address email is removed from the privacy * thank you for your time.
You will need to check with Sony to see if they have Windows 7 drivers available for your model HandyCam.
Sony has written drivers for their products, not Microsoft.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 Hardware/Software Compatibility Center.
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Standard VGA driver does not load when reinstalling Windows XP
Reinstalled Windows XP on my computer, but he doesn't not load the driver VGA Standard - so I can't install the video driver ATI Radeon x 600 for my graphics card.
In Device Manager, it shows (in yellow) in the other devices section, "Video controller (VGA Compatible)". I tried to update / install video driver with the Windows XP installation CD in the disc drive, but whenever he says, can not update material. Whenever I start, the Found / installing the new hardware box arrives, but after a search, he finds no driver to install the video card.
Of which I did some research on the web, I need to load the Standard VGA driver before adding any other drivers (IE, ATI Radeon x 600 video driver) - but Windows XP does not say the driver VGA Standard of its installation disk. Help!
I have not yet tried reinstalling Windows XP again, FYI.
Hi people,
You could try to remove the "video controller" in the section other devices in Device Manager, then restart the computer.
Who needs to be reinstalled card generic video driver.
However, if you have the correct video card driver, you should be able to reinstall this driver from Device Manager.
Right click on "Video controller" entry and go to the "updated driver software".
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
At the same time the downloaded movies netflix has more audio. Device Manager does not display a driver of the camera when the camera is attached via firewire and running? I tried to reload the drivers and worked with the pilot web-based updates.
Hi mstradt,
1. which version of the operating system are you using 32-bit or 64-bit?
2. What is the model of the camera number?
3. you try to use the camera of Sony for the first time?
4. How do you try to connect the camera?
You can first try connect the camera with the different port and check if it is detected.
Also try to use only Sony 4 firewire cable 4-pin to connect the camera.
You can also visit the following links and see if it helps:
Can what types of connections and digital video cameras be used to import video?
Troubleshoot camera connection
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
ICH10R SATA RAID driver does not load on the Setup
I have a new computer with a Gigabyte GA-EP45-UD3P motherboard. It allows the disk RAID configuration.
I have two 1 TB SATA drives installed. I have configured the RAID BIOS
When I load Windows XP Pro (OEM), I hit F6 to install the RAID driver.
It is said to put it in the floppy drive and press ENTER. I put the disk in the floppy drive and press ENTER. Nothing happening (not messages) and it asks again to put the floppy in the floppy drive and press ENTER. I'm puzzled. Any help is appreciated.
Hi MightyMouse,
As you said, if you can't load the drivers or get the disk to spin there is a hardware conflict / issue. To solve, you can contact the manufacturer or try a BIOS update. If you have any other questions please let us know.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
driver does not load on computer
Scan-Doctor recognizes the printer on the wireless network, but after many attempts, the driver load on computer
Please ignore my investigation that I have misquoted the kind of material involved
-
A drive mapped on P to P does not load at startup upward.
My question is similar, but may have a different answer. I have a peer-to-peer network and my computer plays the main role. In the morning he gets turned on first so that other computers can charge the player. Some of my programs require that the mapped drive is the same on all computers like me. The problem is that when I turn on my computer, it does not read the drive mapped on himself and he listed as disconnected. I then manually go and plug. Again, it is annoying more then anything. Any suggestions?
Hi Loreman,
Thanks for posting your question in the Microsoft Community.
From the descriptions of the question, it seems that mapped drive does not load at startup to the top.
I imagine the inconvenience that you are experiencing. I'll help you fix the problem.
Follow the methods and mark the question below:
Method 1:
Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-softwareImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2:
Drive mapped to the network connection may be lost:
http://support.Microsoft.com/kb/297684
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
I hope that the information above helps you.
Your response is very important for us to ensure a proper resolution.
In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.
-
Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.
I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.Please notifyGrahamHi Graham,
Thanks for the reply and happy to know that the problem has been resolved.
If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.
-
Driver for printer Samsung ML2165 does not load the States, it is not compatible on Windows 7
Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs
I am trying to download a driver for a Samsung ML2165 printer but it does not load, he always says they are incompatible, and the port does not recognize the printer, any ideas please. I use widows 7, on a Lenova 3000 series desktop computer.
You did that you downloaded the correct driver for the correct architecture (32 or 64-bit) Windows 7, you use?
My PC running the 32-bit version or 64-bit Windows?
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit
In addition, you should try to install the driver first before connecting the printer.
1. install the driver
2. restart the computer
3. connect the printer
Maybe you are looking for
-
HP Mini 110: HP Mini 110 off months, now wants a BIOS password at startup
It was off for a few months. This seems to be a request for bios.Whatever I give it fails and on the third attempt and gives what appears to be the serial number of the computer: CNU9384JRVClues as to what the self-generated mystery password can be?
-
I can't put my Telechareger background. All I get is the internal error message.
The only background that works is solid colors. No picture is no images. nothing will work in the background of color only. Thank you
-
I have Windows XP SP3 OEM CD. I want to use to create a 'new' Windows XP OEM CD slipstreamed which would include at each update published security for XP since Service Pack 3. After researching this project for a bit, I noticed that an unholy amount
-
Can I remove the Secure Access software?
Hello I just bought a bunch of GM 16 flash drives Ultra to unload all photos that are all over my hard drive. I don't need to password protect my photos, just space max to store. Can I get rid of the software that came on every flash drive without
-
Of the writing work that I can't use the PC at home. I upgraded from Windows 7 to Windows 10 hours ago. The installation seems to go straight up what the PC restarted last. Previously, I had 4 four accounts on the machine as follows: -. My user accou