handycam sony USB driver does not load

Similar Questions

• driver does not load

  My TssT SH-S203N sata dvd rom driver does not load. He had worked.

  There is a top exclamation point in Device Manager

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

  My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?

  Do not use windows update for drivers.

  Update your drivers Lenovo support and see if that helps

  If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work

• Tek TDS2014 driver does not load as a reference vb6.0

  Downloaded the latest version of the pilot site TDS2014 NOR (ver 2.7.1) and it seems that there are no typotheque so it does not load as a reference in VB6.0.

  I had an older version (2.0.9 dated 2006) which was able to load as a reference but started having problems with it after the NI-VISA 4.5.

  First, is there a library of types available for this driver I'm somehow missing or is there the intention to support VB6 on the new driver (at this point, I'm not wan't to create based on the .h file)? Otherwise, there are the old versions available with a type library that I can get to try?

  If I can't help with that, the real problem I had with the old driver after upgrade of VISA is that I can not put the Horizontal attribute to time Record to 1usec with the driver tktds1k2k_ConfigureAcquisitionRecord function (corresponds to a setting of the scope of the 100nsec/div). All other settings seem to work, here's the log of NOR-SPY for setting 100nsec/div:

  viPrintf (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HORthe % EC")
  Formatting viWrite (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HOREC: .000000e-08 ', 20, 20)

  Note the value sent in HOREC order is damaged, must be 1.000000e - 07

  Here is SPY for the work of setting 250nsec/div:

  viPrintf (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HORthe % EC")
  Formatting viWrite (USB0::0x0699:0 x 0368: C03...) ((0x040BD0F8), "HOREC 2.500000e - 07 ', 20, 20)

  Because it worked before upgrade VISA that I was trying to exclude imcompatability problem with former driver. Are there known bugs 4.5 VISA who will account for this? Also, I am able to put 100nsec/div with VISA sign using the SCPI command, so the question is not in the scope.

  My last config is:

  Windows XP

  NI-VISA 4.5

  NOR-IVI 3.3

  tktds1k2k_32.dll ver 2.7.1

  For now, I'll try using WriteInstrData and send SCPI directly as a workaround.

  We will publish the updated driver (2.7.2) to focus on the problem of type library. Please let us know if you still have questions.

• TPkd driver does not load

  At the start, driver TPkd does not load.  (A Windows driver?)

  Restart takes<3 min,="" startup="" takes="" 2hr45m,="" tried="" standby="" but="" it="" timed-out="" overnight="" and="" took="" nine="" hours="" to="">

  There are six other error records everything (same as & daily) "services could not start (3 files, 3 trails) in the 'hidden files and folders' - want to see?

  So, I did not have a restore date to come back because I have 'cleaned' too much.

  I don't know how to reload a Windows or a part of it even if I had a disc for this.

  Can you help me or do we not have to buy another computer?

  MBJ

  Hi JackandMiriamJenks,

  I suggest to start the computer in safe mode with network and try to download the update of the article mentioned.

  See the link below to start in safe mode:

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

   

  Update for Windows XP (KB926255) security

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=13220

  I hope this helps.

• Driver does not load correctly

  Some time previously, I've updated my HP Officejet 6480 all in one software and since then, the drivers do not load correctly.  Whenever I start my computer I get an error while loading programs are.  It is said that a driver has not loaded correctly.  I am running Windows 7 home.  It may have started when I upgraded to Windows 7, 64-bit XP and loaded the new software from the HP website.  I don't remember exactly.  Today I tried to send a fax from the solution Center and found that the "Send a fax" button is irrelevant.  Since I am able to send faxes from the buttons on the front panel on the printrer, I guess that the driver does not properly is the fax driver.  All other functions work.  I uninstalled the software from the control panel in Windows 7 and downloaded and reinstalled the software several times without success to resolve this problem.  Any ideas how I can fix this problem?  Thank you.

  Hi Dave46a,

  Welcome to the HP Forums!

  I see that you have trouble to install your HP Officejet 6480 to your Windows 7 PC.

  I would try the following:

  1.) use Microsoft Fix It to uninstall the software. Select Windows, click on install or upgrade software or hardware, click on install or remove programs, and then click Run now next to correct problems that programs cannot be installed or uninstalled. (Use this to remove the printing software).

  2.) try using the printer HP install wizard for Windows for the re - install.

  (3.) to run the HP print and Scan Doctor to see if other errors occur.

  Hope this helps and have a nice day.

• HP DV7 - 6C95DX Intel Centrino Wireless N + WiMAX 6150 driver does not load

  Hi all

  Just bought the laptop today and did a fresh install of Windows 7 Pro 64 bit. Everything is OK except the wireless Intel Centrino N + WiMAX 6150 driver will not load. All the other drivers loaded without any problems. I downloaded the driver from the website of th HP, I have download the driver in the Intel site and always used to install.  It's very strange because when I run the driver from the Intel site, it has finished installing, but in Device Manager, I always get a "!" mark next to the device. My wireless adapter works it is what I use now to connect to internet.

  I even tried unnistalling Intel PROSet/Wireless WiFi software and re - install it and still the only one who does not install properly is the "Intel Centrino Wireless - N 6150" and "Microsoft Virtual WiFi Miniport Adapter" and the "Microsoft Virtual WiFi Miniport Adapter #2".»

  Can anyone help me, it bothers the heck out of me.

  Thanks in advance

  Here is the driver [content deleted]

• Dolby audio driver does not load after upgrade Windows 10

  Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)

  Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.

  Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.

• Windows Media driver does not load code 10?

  anyone has this problem

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• the digital camera driver does not load when a sony camera is connected to the computer vista laptop.

  At the same time the downloaded movies netflix has more audio.  Device Manager does not display a driver of the camera when the camera is attached via firewire and running?  I tried to reload the drivers and worked with the pilot web-based updates.

  Hi mstradt,

  1. which version of the operating system are you using 32-bit or 64-bit?

  2. What is the model of the camera number?

  3. you try to use the camera of Sony for the first time?

  4. How do you try to connect the camera?

  You can first try connect the camera with the different port and check if it is detected.

  Also try to use only Sony 4 firewire cable 4-pin to connect the camera.

  You can also visit the following links and see if it helps:

  Can what types of connections and digital video cameras be used to import video?

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP laptop - 15-r114ne: VGA and USB Driver does not

  Hello

  My newly purchased HP for laptop - 15-r114ne can't see the devices connected via the USB Ports. I do not see the load connected wih on my android phone, but I can't access the device.

  Then the screen brightness is not reduced; It is very difficult for me to spend an hour on this system.

  I tried the Intel graphics driver high definition (HD), but it does not work.

  Urget help please

  Hello:

  See that if these graphs and USB3 pilots work... the first file on the left is auto installation of the file.

  https://Downloadcenter.Intel.com/download/24973/Intel-HD-graphics-driver-for-Windows-7-8-8-1-64-bit

  USB3: Download, unzip and run the setup.exe file...

  https://Downloadcenter.Intel.com/download/25687/USB-3-0-Intel-USB-3-0-driver-for-NUC6i-x-Sy

• Standard VGA driver does not load when reinstalling Windows XP

  Reinstalled Windows XP on my computer, but he doesn't not load the driver VGA Standard - so I can't install the video driver ATI Radeon x 600 for my graphics card.

  In Device Manager, it shows (in yellow) in the other devices section, "Video controller (VGA Compatible)".  I tried to update / install video driver with the Windows XP installation CD in the disc drive, but whenever he says, can not update material.  Whenever I start, the Found / installing the new hardware box arrives, but after a search, he finds no driver to install the video card.

  Of which I did some research on the web, I need to load the Standard VGA driver before adding any other drivers (IE, ATI Radeon x 600 video driver) - but Windows XP does not say the driver VGA Standard of its installation disk.  Help!

  I have not yet tried reinstalling Windows XP again, FYI.

  Hi people,

  You could try to remove the "video controller" in the section other devices in Device Manager, then restart the computer.

  Who needs to be reinstalled card generic video driver.

  However, if you have the correct video card driver, you should be able to reinstall this driver from Device Manager.

  Right click on "Video controller" entry and go to the "updated driver software".

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ICH10R SATA RAID driver does not load on the Setup

  I have a new computer with a Gigabyte GA-EP45-UD3P motherboard. It allows the disk RAID configuration.

  I have two 1 TB SATA drives installed. I have configured the RAID BIOS

  When I load Windows XP Pro (OEM), I hit F6 to install the RAID driver.

  It is said to put it in the floppy drive and press ENTER. I put the disk in the floppy drive and press ENTER. Nothing happening (not messages) and it asks again to put the floppy in the floppy drive and press ENTER. I'm puzzled. Any help is appreciated.

  Hi MightyMouse,

  As you said, if you can't load the drivers or get the disk to spin there is a hardware conflict / issue. To solve, you can contact the manufacturer or try a BIOS update. If you have any other questions please let us know.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• driver does not load on computer

  Scan-Doctor recognizes the printer on the wireless network, but after many attempts, the driver load on computer

  Please ignore my investigation that I have misquoted the kind of material involved

• A drive mapped on P to P does not load at startup upward.

  My question is similar, but may have a different answer.  I have a peer-to-peer network and my computer plays the main role.  In the morning he gets turned on first so that other computers can charge the player.  Some of my programs require that the mapped drive is the same on all computers like me.  The problem is that when I turn on my computer, it does not read the drive mapped on himself and he listed as disconnected.  I then manually go and plug.  Again, it is annoying more then anything.  Any suggestions?

  Hi Loreman,

   

  Thanks for posting your question in the Microsoft Community.

  From the descriptions of the question, it seems that mapped drive does not load at startup to the top.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

  Follow the methods and mark the question below:

  Method 1:

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Method 2:

   

  Drive mapped to the network connection may be lost:

  http://support.Microsoft.com/kb/297684

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.