Driver for "DP bottom of BASKET SCSI peripheral housing"?

Similar Questions

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Changing from 32-bit Win 7 to 64 - bit Win 7. Do I need a 64-bit SCSI driver for my hard drive SCSI of WD32 00BEKT-00F3T for "clean installation?"

  I am currently using Win 7 Home Premium 32-bit on my laptop.
  I intend to switch to Win 7 64-bit and bought the full product and I am ready to install it. I hesitate only because a previous installation of Windows, I remember being trapped because I didn't have the appropriate manufacturer SCSI driver to install during the installation process of Windows (Vista?).
  Win7 Home Premium 64-bit requires separate SCSI the manufacturer driver during installation (clean install!) or is automatically detected and installed with Win 7 64 bit?
  For your info, my HARD drive is: hard drive Western Digital WD32 00BEKT-00F3T SCSI.
  I see in the properties of the HARD drive under Win 7 32 bit driver running is a Microsft (Driver version 6.1.7600.16385) and so I'm hopeful that the switch, I intend require no road by the manufacturer, and that everything will be taken care by the installation of Win 7 64 bit.
  Can you help me, please?

  Yes, you will need a 64-bit driver, there need not be a native driver for Wndows 7 64-bit, you can also use a Windows Vista 64-bit driver if one is available.

• Type of SCSI controller and the driver for Win XP Pro

  Can anyone tell me please what SCSI type should I use for Windows XP Pro? Any SCSI controller I use, VSphere, ensures an error telling me that Win XP does not support the driver that uses VMware ESX to SCSI virtual devices - but it works very well.

  Any help is appreciated. TY

  This is the document that I always follow when creating XP workstations,

  http://www.VMware.com/files/PDF/XP_guide_vdi.PDF

  Note that you need the new version of the driver for new service packs.

  That said, like André request can you put a picture of your error.

  As a result, I'm moving this post to the guest OS of the forums section.

• Can not find driver for CompactLogix L32E in OPC Server OR

  Anyone know how to contact the CompactLogix L32E Lookout 6.5.

  It doesn't seem to be a driver for it in the OPC server from OR.  Can someone point me in the right direction.

  I thought that the 5300 ENI:CompactLogix would work, but it does not work.

  Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.

  Step 1: In the OPC Server OR create a new channel. The channel name can be anything you want.

  Step 2: Device driver will be ControlLogix Ethernet.  You can also enable diagnostics if you want.

  Step 3: Network adapter. I used default.

  Step 4: Write only the latest values.  Service at 10. (These are the default settings and are recommended.)

  Step 5: Finish new channels configuration

  Step 6: Click the icon to create the new device

  Step 7: The name of the device can be selected.

  Step 8: Select model of device in this case CompactLogix 5300

  Step 9: Device for me ID been XXX.XXX.XXX.XXX, 1, 0 IP address (note the 1 redirects the path at the bottom of basket.) 0 to the location where the processor is)

  Step 9: Device synchronization.  Leave the default values.

  Step 10: Automatic demotion leave unchecked.

  Step 11: Leave default values do not generate start remove create and enable the subgroups

  Step 12: Port and watchdogs with default settings

  Step 13: Options of the project leave default. (In my case, I've changed to short because that's what most of my tags was)

  Step 14: Create tagname of the device.

  Step 14: Finishing Device setup.

  You now have two options.

  Option 1: Start creating labels according to your needs. (This is what I did)

  Option 2: Newly created device right click and select property.  Then select the database creation and click auto create.

  Go to the belvedere and create the new driver.

  Select Client OPC

  The server name will be on the menu drop down. National Instruments: NIOPCServers

  Click OK

  You must be done and smiling.

• InPro Comm IPN2220 Wireless LAN Card - need driver for Vista OS

  Hello

  I'm new to the Forum and I think that it is just the place to get answers to my questions?

  OK, I use the laptop Toshiba Equium L10 and I just downloaded and installed the "public" version of Microsoft Windows VISTA beta 2.
  The installation went very well and it took about 40 minutes and considering that it is only a 1.50 GHz Celeron (M), which was very good, but I'm having problems to make a software/driver for my '' integrated '' InPro Comm IPN2220 Wireless LAN Card, so for now, I can not connect to the internet on this subject. (On the bottom of the laptop, it has ' FOXCONN T60N871 802.11 b/g W/LAN Card "which I think is the real name for 'InPro Comm IPN2220 Wireless LAN Card'.)

  I installed the software/driver LAN wireless from the utility CD, and although the software seems to be no problem, Windows does not detect the card and does not install the driver for it. I also tried Win Vista update, but nothing is found.

  Does anyone know ho to get the software/driver to install properly so that Windows Vista can detect the card and install the driver and software?

  If not, does anyone know of a driver updated for VISTA BETA2?

  I would really like to keep Vista Beta2 on my L10 so if anyone has some tips that will get my built-in wireless card works, I would be very grateful. (BTW, I don't have a 'wired LAN').

  Concerning

  Hello

  These days, a lot of users wrote vista and their experiences with the installation. As you know that officially there are no drivers available. I think that Toshiba will offer all the drivers at the point where vista is officially on the market.

  You can post on this tread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13771 maybe Brave will give you more information about the installation on its L10.

• Can not find the driver for Satellite A300D - Windows XP SATA

  cannot find driver for toshiba satellite a300d windows xp raid scsi controller

  Please help me

  I think you should take a look here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=132902

  You will find the link to the driver package that contains the required for the AMD chipset SATA drivers.

  See you soon

• Satellite A200-1BP: need to display driver for Vista

  Hi guys!

  I have a satellite A200-1BP... that one must download a±? A± did not understand these = PSEAC, PSEA0...

  So I installed one of them for vista... for geforce go7300.but my display driver has not changed... it still didn't give me that a± want a good perormans... A± couldn't play NFS carbon: (...) How can a± install my display driver for vista? help me... Please explain correctly and in detail

  Thanks for your answers rigth now...

  Hello

  Additional numbers describes the series of laptop! There are different A200 series!
  At the bottom of the unit, you will find the integer and you need only the first characters and numbers 5.

  Please choose the right Satellite A200 series and download the graphics driver on the right!

  But the way in which; I don't know if the game performance will improve after the installation of the new graphics driver I've read somewhere that Vista needs a lot more material performance and that's why some games don t m runs smoothly.

  In such cases, it s advisable to run and play games on Win XP operating system!

• DVD drive for HP Envy running Windows 8

  I get an error regarding a possible corruption with the driver for my DVD drive on my HP Envy (Windows 8) factory installed.  When I try to update the driver through the Device Manager, it says the best driver currently installed.  Unistal does not help either, and HP has no download available that I could find to get a copy of "fresh" to the driver.  Here, any help is greatly appreciated, the news of the event are below.

  Device SCSI\CdRom & Ven_hp & Prod_DVD - RAM_GH82N\4 & 38dc178c & 0 & 040000 had a problem starting.

  Driver name: cdrom.inf
  Class GUID: {4D36E965-E325-11CE-BFC1-08002BE10318}
  Service: cdrom
  Lower filters:
  Upper filters:
  Problem: 0 x 27
  Status: 0x0

  Hello

  Thanks for providing the information.

  Have you tried The Microsoft Fixit for ligthscribe problems yet?

  If the fixit does not resolve the problem, then the DVD player must be replaced.

  Is your laptop still in the period of one year standard warranty? If it is a desktop of Windows 8, it should be. The release date for the marketing of resources 11 October 2012 it is still covered by the warranty.

  Contact HP to get a DVD player replacement warranty.

  I have

  Best regards

  ERICO

• Driver for old parallel port; This device has a problem: Code = 28 (0x1C)

  We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.

  I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.

  [Peripheral problem]

  Unknown device
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
  Alloc resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
  Driver: Driver is not installed

  Standard 101/102-key or Microsoft Natural Keyboard
  Keyboard
  This device has a problem: Code = 27 (0x1B)
  System failure: try changing the driver for this device. If this does not work,
  see the documentation for your hardware.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
  Alloc resources: None
  Forced resources: None
  Start resources: no
  Filtered resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Core resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Driver: Keyboard\0003
  Driver date: 23/04/1999
  Driver: idvkd.sys
  File size: driver not installed
  File date: driver not installed
  Driver: hidparse.sys
  File size: 44368 (0xAD50)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidclass.sys
  File size: 23520 (0x5BE0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidvkd.sys
  File size: 5088 (0x13E0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.1998

  PCI card
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  Universal Serial Bus PCI
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  PCI system management bus
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
  Alloc resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Forced resources: None
  Start resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  HW revision: 004
  Driver: Driver is not installed

  The motherboard seems to be Intel 915P chipset.

  Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:

  http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/

  Then restart the computer.

• Writing a driver for the GPIB-ENET100 in C++ based on a Linux machine

  I picked up some remains of a driver for this device and I'm trying to resurrect it for a new project.

  Basic Comms between the host and the device of the GPIB-ENET work OK, I can analyze the GPIB bus for instruments and address address Analyzer connected properly.

  But, if I try and write commands to the instrument I get an error GPIB.

  Work of communication very well by using windows OR browser based tool, so I've captured the Ethernet traffic and found several types of messages I do not recognize. He also seems to be sending messages on port 5015, but also the main port 5000.

  SO, my question: is there a document covering the interface with the device at a low level of TCP message? Alternatively, as I suspect it is the secret of stuff and I'm supposed to buy an expensive software of NOR?

  SOLVED.

  After connecting to the GPIB-ENET100 using ibfind and setting various options on board level it is essential to drop and reconnect the plug before attempting to connect and communicate at the peripheral level.

  My version of ibfind opens a socket and my version of ibonl closes the socket when it is called to set a Board/device offline.

  The driver now works perfectly.

• Install Windows 7 on a Compaq Presario CG61 - driver for HARD drive

  Hello everyone,

  because of my Compaq Presario CQ61-423SG HARD drive (series: edited by moderator) broke (and with it the recovery partition), I would like to install a new Windows 7 (home premium, 64-bit) on the new HARD drive.

  Initially the program is in need of a driver for the HARD disk installation. On the HP site, I can't find. Can someone help me? Where can I get a driver for my laptop?

  Thank you.

  Hello:

  I am very surprised that Windows 7 requires a driver disk for the model controller.

  In any case, I compressed upwards and tied the drivers you need (look under the line attachments at the bottom of my post).

  Now, here's what you have to do...

  Extract the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• Bluetooth driver for Chinese bluetooth dongle

  I have a Chinese bluetooth dongle, but I don't have a driver for it. He Generic Bluetooth Radio installed and Microsoft Bluetooth Enumerator but showing 5 other yellow marks in other devices with tag "Bluetooth Peripheral Device".

  Hello

  1. What is the number of brand and model of the unit?

  2. do you get an error message? If Yes, what is the full and exact error message?

  I suggest you contact the manufacturer for an updated driver and check if it works.

• I have the driver for my printer but when I run the wizard the drop down of printers who does not understand my printer HP deskjet 9650.

  original title: printer drivers
  I have the driver for my printer but when I run the wizard tells me I need us the built in xp Printer Wizard to install the printer on this operating system. When I go to do this, it gives a fall to the bottom of the printers who does not understand my printer HP deskjet 9650.

  Is there a way do not use the Printer Wizard because I have the right driver. Only, it is not listed through the wizard.

  Hi michelledumont,

  Follow the steps in the article.

  Resources for the resolution of the printer in Windows XP problems

  For reference:

  How to install a printer driver locally for a remote printer in Windows XP

• HP 250 G3 laptop: driver for network controller

  Hello
  Can you help me find the driver for network controller?
  I could not found on the page of the HP drivers.
  Hardware ID here:
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103
  PCI\VEN_1814 & DEV_3290 & CC_02800
  PCI\VEN_1814 & DEV_3290 & CC_028

  Thank you in advance.

  Wishes for the day scu92

  If please click the link below and try to install the drivers and let me know if this solves the problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6732463&swItemId=ob_148570_1&swEnvOid=4063

  Concerning

  Fadi

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

  Click on the "congratulations, Thumbs Up" at the bottom right to say 'Thank you' for helping!