Driver for Motorola Set-Top Box QIP6416 to Windows 7

Similar Questions

• Toshiba WL863 takes too long to start and its Set Top box problem

  Hello

  Aside from no YouTube on the TV - is not a real question

  I have 2 problems with WL863 TV:

  1. the TV takes long time to turn on (between 2.5 and 4 minutes).
  2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  I use the latest firmware.

  This would have something to do with the settings, or do I have to send the TV for repair under warranty?

  Please give some suggestions.

  Thank you

  > 1. The TV takes time to market (between 2.5 and 4 minutes).
  Have you noticed that in the past, or the first day of purchase?

  If not, I recommend you load the default settings (reset) TVs and check it again.
  In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

  > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  This problem could be linked to the connected Set Top Box and not the TV device.

  TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

• Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

  I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

  I read your question. I asked you what happened when running
  TV Setup and specifically want to know if the TV Setup detected your set top
  Box/decoder and it happened. If Media Center does not automatically detect your decoder,
  have you tried the manual method to learn codes? I'm trying to help you
  features of Media Center EPG.
   
  You must ask the FIOS people if they have the equivalent of a DTA
  offered in the world of cable and OTA.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Windows Media Center didn't recognize Cisco/ATT Uverse Set top Box remote

  With Windows 7 Media Center throughout the TV Setup Wizard, everything works until the screen of the decoder.  Automatic set-top box set up does not work.  Through the screen to identify my decoder does not work.  There is not an option for Cisco (there are 361 other).  It seems that Cisco should be on this list.

  Using the function "learning" remote does not work either.  Media Centre telling me that it does not recognize the remote.

  There is information on the web about this, but I have not seen an emphatic solution.

  Thanks for your insight into this problem.

  Please visit this link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/able-to-see-live-TV-in-Windows-Media-Center/06193a43-D267-4B34-8e9c-5248bc424473

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/att-cable-box-Cisco-MN-ipn4320-wont-work-with-WMC/bb6684bd-628c-4F63-be82-fb800e71f5bd

• Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7,

  Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7

  Dear Brigitte,
  Yesterday, I tried to connect my keyboard to my mini HP numbers, but it did not work.  I am sure that the problem is the driver, as I was able to connect to my HP laptop with Vista, without any problem.

  The keyboard is a keyboard of ten Note X TK01 USBM.  In the back are the words "Arvel TK01 = USBM Ten keyboard, S? N 990500424, made in China.

  You can locate a driver for me so I can install it on my HP Mini?
   
  Thank you

  Dear Brigitte, it was one of those anomalies that solve themselves.  After trying several times, I found the pad of numbers worked so I replugged it it after that I received the error message.  Second time around, it works fine.  JC

• I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  Best way for you is to use Vuescan. I use it in conjunction with a Canon Lide 30 and it works very well...

  http://www.Hamrick.com/

  There is a trial version... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate.

  Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?

  Hello

  What brand / model of the computer?

  There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.
   
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Driver for my HP DeskJet 1280 work with windows 8 pro 64-bit

  I need an updated driver for my HP DeskJet 1280 work with windows 8 pro 64-bit, has issued summer yet?

  No, and it will not be because the 1280 is an abandoned product.

  What you have to do is to go to control panel > devices and printers > add a printer.

  When in the process, you can use Windows Update to search for a driver, take it. The list of compatible printers is growing exponential, and your should now be in the list of printers HP or Hewlett Packard... This may take a few minutes to grow...

• Driver for Motorola Home Monitor

  Have a Motorola home monitoring unit. Someone at - it a driver for Windows 7?

  Hello

  If you are referring to Motorola Home Monitoring & Control System which is provided by Motorola, I suggest you check out the links below for more information on the product.

  http://broadband.Motorola.com/consumers/products/HMEZ1000/downloads/520610-001-a.PDF

  http://www.Motorola.com/video-solutions/us-en/products-and-services/software/4Home-software-solutions/4HOME-security-and-monitoring-us-en

  For more help on this product, you can contact the Motorola Support.

  Reference:

  http://www.Motorola.com/business/us-en/support/support+contacts/phone+support

• Impossible to update driver for Motorola WX345 Smartphone.

  Original title: Smartphone from Motorola WX345

  Driver does not recognize my Motorola WX345 Smartphone. Software DriveScanner of Motoroloa site says there is a 16-July-2007 update USB driver but mine is June 21, 2006 to 6.1.7600 16385.  I tried update driver from Microsoft site several times, but I have to do something wrong. Can someone tell me some step by step directions to update the USB driver so it isn't keep telling me it has disconnected?

  Hi RogerArmfield,

  Thanks for asking this question to Microsoft Community!

  If I understand you correctly, you are unable to update scanner driver Motorola WX345 Smartphone. Please let me know if I'm wrong.

  I would contact Motorola WX345 Smartphone support and download and install the latest drivers and software on their Web site.

  Here's their link: http://www.motorola.com/Support/US-EN/Consumer-Support/Cable-Modems-and-Gateways

  I also suggest you to return these items to update drivers for the system.

  Tips for solving common problems of driver: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-driver-problems

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Install Windows updates in Windows 7: http://windows.microsoft.com/en-US/windows7/Install-Windows-updates

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Re: Need driver for Satellite P100-346 card reader / PSPAAE / Windows Vista

  Could you please help me and post a link where I can download a driver for the Satellite P100-346 card reader / PSPAAE / Windows Vista 32 bit?
  THX!

  Hello

  Please, check here:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Driver for my Toshiba Satellite to display missing windows 7?

  Hi all

  I have a problem with the display of my laptop driver. Specifically, the display driver is to stop working when I wake up the device from sleep. I tried to update the driver from Toshiba in Australia, but surprisingly I found the display driver for my model. So I tried to use the vista drivers but the problem still exists. Unfortunately ATI does not provide drivers directly to the laptop Toshiba instead they advice to go to Toshiba. Can any one advice me how to fix this. My Toshiba specifications detailed as follows:

  Satellite phone
  A300 series
  Product: PSAG4A - 02500M
  Windows 7 64-bit operating system.

  There is a link on the page of the Australian rider A300 "unable to find drivers for W7 - click here" (sound in red, small and not obvious). Looks like you want to go here [http://support.toshiba-tie.co.jp/windows7/download/Satellite_A300_64_au.htm]

• laptop WQ671UA #ABA: wireless driver for model: G72-260US product: WQ671UA #ABA Windows 7

  Could guide you please download driver wireless for the G72-260US model, product: WQ671UA #ABA, whose number for wi - fi?

  Hello:

  The list of the parts for your model indicates that it is a Realtek RTL8191SE 802.11b/g/n WiFi adapt.

  Therefore, you should use this driver for this card:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102574-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4217273 & sw_lang =