Boolean simultaneous keyboard switch

Similar Questions

• Acer keyboard switch 10 entering sleepmode?

  Hello!

  As says the subject, when I paus wrote on my 10 min 1 similar switch, sometimes even less, the keyboard does not record the first letter written. It s like the keyboard has entered a kind of sleepmode. It s extremely boring. Anyone got a fix on this one?
  Thank you!

  I don't have a Switch 10, but had a chance to use one for several weeks when they released first. The USB device is listed (I think) under HID, ot Human Interface Devices. He has not called a keyboard, but a USB device, and when you talk about properties on it, you should see a power management tab.

• Can a boolean have a switch and the closed mechanical action?

  I have a Boolean value set to true creates a text file until it turns out wrong (switch when you press on). However, I also want this value to a time indicator reset when the Boolean value is initially pressed as true. Now if the Boolean is wired to the time indicator, time remains to 0.0 when it's true. But for now, I need to act as a lock when you press. How can I do to solve this?

  Thank you

  You can consider using the Boolean value to trigger an event.  Then put all the stuff you want to do in the case... detect even if this is the first press of the button...

  Hope that helps.

  Hummer1

• Lenovo V series simultaneous keyboard / Trackpad editions.

  So after a year and a half trying to get Lenovo to replace my Thinkpad Edge 14, I decided finally enough was enough and has managed to get an Ideapad again. I got the Y510 two or three years back, and it was / is still a fantastic camera! However, the specifications are old, and any evolutionary material is a bottleneck by an old integrated card.

  in any case, now, I am the owner of a V470 and this is a feature of research very very elegant, the speakers are very well (they certainly can't compare to my Y510 Dolby with Sub), but the most desirable feature is 525M 1 GB nVidea discrete graphics.

  So I fire, load something simple: Minecraft.

  .

  Then it happened. My hands mistaken? How is it possible that the keyboard can NOT work at the same time as the Trackpad?

  I press and hold W for go ahead, try to turn: I get nothing. I'll stop now the W key, using the Trackpad will return to normal. IM moving the autour slider to ensure a directional movement fluid, all works here... so I press W to begin moving, always moving the cursor: I get nothing.

  I want to know if this is 1 of 3 things.

  1. a driver problem. The solution simpler, of course, but it does not stop the question to be less boring up to this point. (While all my Windows updates are good... so I'm fearing that the solution won't be so easy.)

  2. a hardware problem. Somehow, maybe in the Assembly of this device, something is not connected to the right or something was not welded during manufacture of the motherboard (even if it's all PC making Assembly micro... so I doubt that the latter). This would force me to face to regain a Lenovo computer, BUT again, however, I am willing to make the sacrifice in time because I am very satisfied with all the other features in retrospect to his old unit.

  3. a design flaw which is not rectifiable. It's the most likely scenario, and one that I hope is not the case. However if this is the case, can someone give recommendations of laptops series IdeaPad with discrete graphics (at least a 525M nVidia or ATI equivalent) that can simultaneously have Trackpad / keyboard use?

  I can not understand as to WHY such a function intentionally would disappear, what is the point of a laptop if I have to tie a mouse whenever I want to play. -.-

  This thread can be closed. It was check the Palm, for some reason it was turned on,-.-

  This is a great feature... If you don't game, however, since games > worry about accidentally hitting the trackpad with my palm, that does not fly.

• How to stop pop-up screen 'See the keyboard, Switch Application, full Menu'?

  Hi all

  I always get this pop-up screen when switching from one screen to the other. I don't know what is the reason for the pop up screen and how to stop it. If you have encountered this problem before and know how to deal with it please give me help.

  The pop-up screen contains the following choices:

  Display the keyboard

  Switch application

  Full menu

  Thank you very much for your help!

  I found the solution to this problem here http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&message.id=10933

• The satellite A range keyboard switches in command mode

  Help, please!

  My keyboard guard passage to a command mode, I might be typing a paper or just browse the internet and my keys will suddenly rise to orders instead of the keyboard.

  How can I stop this?
  Its a new laptop (2 months)

  > My keyboard guard passage to a command mode any
  What commands do you mean exactly?

  Does this happen with no posted special function mode key?

  What about the use of the external USB keyboard?
  This problem happens using this 2nd external keyboard too?

  The comments appreciated!

• A Boolean value of switching

  Cave of the var: Boolean;

  Cellar = true;

  If (cellar == true) {trace ("true") ;}

  If (cellar == false) {trace ("false") ;}

  cave_hit_area.onRelease = function () {}

  cellar = false;

  }

  Hi, I have trouble getting this work.

  All I have to do is flash to realize that the Boolean value is passed from true to false so that I can make another magic happens.

  I was hoping that changing just he would work... but now I think I'm probably missing something, or I'm going the wrong way on it... but I do not know... Hense why I need help on this one

  Any help on that would be great.

  See you soon

  If it is the way that you do makes sense to you or not, that does not work elsewhere. If you need to change your way of thinking a little bit. Your code becomes more complex (not in a good way) and becomes harder and harder to decipher and remember what it means and what is the case. And using things like _root make you so that it will be much more difficult to make changes in the future.

  So forget what I said earlier about how to manage a bunch of them, but if you have not a lot of them come back later. You'll be much happier.

  The part that I spoke only have an event handler is what is important. Do not try and assign two event handlers. Just assign one that handles both cases. So let's just do this as simple as possible. Forget all the other things you might want to do. Let's just do the star show and hide when you click cave_mc.

  First if your cellar or cave.value (not sure since you seem to continue to add properties) is just to keep track of know if the stars visible or not, why do you need that? You can just ask:

  trace (cave_star_mc._visible);

  Who will trace the value true if the star is visible, and false if it isn't. Do not try and follow something with another variable if you do not need to do. So we won't make any property of cellar.

  If the simpler version of the code would probably be:

  {cave_mc.onRelease = Function ()}

  cave_star_mc._visible =! cave_star_mc._visible;

  }

  The! means taking the opposite of what is the current value. So, if the star is visible now, it will be invisible and if it is invisible, it will be visible.

  If you have the variable for something else, and it might have a different value of the visibility of the star, then by all means make a new varaible. But give it a better name.

  Cellar and cave.value really are not very descriptive. And the code that you are showing seems to mix them. Or maybe that's not?

  If I ask someone "Cellar?" and they answer 'True '. That makes no sense. But if I like someone "isVisited?" or "isActive?" and they answer 'True '. It makes more sense.

• Boolean switch until the released counter + the number of cycles

  Hi, I want to use a Boolean command button (switch release) to rely on a specific value and when obtaining this value (while pressing continuously the button) to turn on an led. If I release this Boolean button, I want to count the time until a value and then to turn off the light, like a hand for a hand detection dry.

  I was thinking of using the number of cycles in a sequence of plate with a delay for the time being I want to split on a matter of true or false, but the problem is that the count of the number of cycles is continuous and not slaughter not on the specific value I want for the power button truning the seeing.

  Any help?

  TNX

  Guy

  
  

• Boolean switch that are timed

  I need to order a heating appliance to be switched on for 60 seconds and then be off for 120 seconds, and then the operation be repeated for a number of cycles. My main loop works continuously with a delay of 50 milliseconds, and needs a Boolean signal from switch continuously, so there is no possibility to place a hold or time out function in this loop. When I try to call a Subvi, which has a delay, the output of my main loop would be delayed. Anyone would be able to recommend me in the right direction.

  Do it like that. It initializes the value False, after time, happening to True, and so on.

  

  This could use some cleaning with nodes Select, but it does the job. The result is False for 120, then True for 60 seconds, rinse and repeat.

• How switch does work in Boolean conditions

  Hi, I have a condition that is "boolCond = true (). If the boolCond is true, the condition is running, but if the boolCond is set to false, then also the condition runs. The branch that is not executed even if the boolCond is set to false. How does the Boolean condition?
  
  < switch name = "Switch_1" >
  < condition = "bpws:getVariableData('inputVariable','payload','/client:SwitchBooleanProcessRequest/client:boolCond') = true () - business" >
  < assign the name = "Assign_1" >
  < copy >
  < from expression = "" Condition is true"" / >
  < variable = part of the 'outputVariable"="payload ".
  Query = "/ client: SwitchBooleanProcessResponse / client: result" / >
  < / copy >
  < / assign >
  < / Body >
  < in > other
  < assign the name = "Assign_2" >
  < copy >
  < from expression = "" Condition is false"" / >
  < variable = part of the 'outputVariable"="payload ".
  Query = "/ client: SwitchBooleanProcessResponse / client: result" / >
  < / copy >
  < / assign >
  < / otherwise >
  < / switch >
  
  Any help?
  
  Thank you.

  Have you covered SOA_ORACLE_HOME\bpel\samples\references\Switch sample?

• Funky behavior Apple adjustable keyboard

  I have a keyboard adjustable Apple of 1992 and a few cords Apple Desktop Bus off eBay and I've been doing a weird behavior from the key board. When typing often will not respond to certain keys being pressed, or in the middle of typing, it will lift repetitions of letters typed in the word, frustrating experience.

  Anyone can shed light on what could go wrong?

  Aidyn thanks

  The symptoms you give, it seems that there is some dirt in the keyboard switches. Here are a couple of webpages dealing with issues also with this keyboard.

  https://geekhack.org/index.php?topic=70708.0

  https://groups.Google.com/Forum/#! topic/comp.sys.Mac.hardware.misc/6XekPss_21U

  What some people have managed to do is to actually wash a keyboard that has sticking keys. To do this, recover a part of distilled water (like who sold to be used with an iron steam; grocery stores often carry). Some warm (temp of body or a little more is OK; not true hot), immerse the keyboard in it. SLOSH the autour for a little keyboard. Repeat the operation with a lot of fresh water. Then hang up the keyboard dry - hanging from a corner is a good way. Let it dry completely; It may take a few days. You can use a fan for drying, but do not use a heat source (for example, a hair dryer). Remember that heat weakens and melted the plastic.

• How to give a delay between two Boolean?

  Hi all

  I want to insert a dalay in time between two Boolean values. My requirement is I want the second boolean to be switched on after delay 2 sec of variable Boolean 1 is turned on.

  How to do?

  Thank you

  Yes, I don't want to do antthing...

  Meanwhile, I also had the same idea...

  Thanks for the reply

• 104Key of Microsoft Wireless Desktop 3000 USB keyboard does not work with a KVM

  I just bought v2.0 of 3000 Microsoft Wireless Desktop combo. I have a KVM switch for two rounds. My problem is the new keyboard switch, in general you simply press the [scroll off] button twice and it doesn't work. I tried to fix this by what I can find, but without success. I need help.

  http://www.TomsHardware.com/Forum/264853-28-some-keys-work-keyboard

  http://forums.AnandTech.com/archive/index.php/t-159825.html

• Stuck on Windows Resume Loader quick screen with USB keyboard, so I can't answer

  Windows Vista has not recovered to sleep, so I turned off computer and rebooted.  Now, I get the message Windows resume Loader

  "The last attempt to resume the system from its previous location failed. Attempt to retake?  Continue with the system summary or remove data restoration and menu system start-up. "

  I have a USB keyboard so I can't use the arrow keys, or enter key, so it's just sitting there. My computer has no PS/2 keyboard entry. I tried to hit the F8 key on startup (as well as the F12), but I can't get another screen. How to answer the question with a USB keyboard?

  Found the solution. Keyboard has been plugged into the USB port on the monitor.  Cable keyboard switched to the USB port on the computer, and then click keyboard worked, so I could answer the question. I chose "Delete restoration data and proceed to system boot menu."  Everything works fine now.

• 8 pre site Dell keyboard problems

  There is problem a simple solution to this simple problem but hours of searching I found nothing I had a dell ensue 8 pro. There are now upward or down arrow on the keyboard to display on how could do such a good device but overlook such a small but important detail!

  Solution-

  Charms bar...

  Settings | Change PC settings. PCs and devices. Typing...

  Scroll to the bottom, under the items 'Touch keyboard' switch on 'Add the keyboard layout standard as a touchpad option'

  Now, when you use the keyboard touch (onscreen)... in the lower right corner of the keyboard on the screen, select the icon for the keyboard layout. The full standard keyboard layout now will be selectable by there (far right)... full optional with up and down arrows.