get the local host ip address

Similar Questions

• Problem connecting to the local host

  I am trying to connect to my localhost server if I can use my program of EasyPHP.  I tried connecting on Internet Explorer and Firefox but not able to connect to the local host. When I ran Windows diagnosis, I got this error message

  "localhost is not configured to establish a connection on port"World Wide Web Service (HTTP)"with this computer.  -What this means and how can I solve the problem? Could a firewall be the cause?
  I have mysql on my computer. When I ran today, he did let me get to my databases. When I used the root username, it not let me access it. Usually, I'm able to access without having to use a user name or password.  Don't you think that this has nothing to do with why I can't connect to the local host to my internet?
  Thank you.

  Hello

  I suggest you post the same question in the Microsoft Technet forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• Using wordpress on the local host

  I know that my post is not specific to DW. I got a lot of help here, so I'll ask the question. My ultimate goal is to work with a form of WP site in DW.

  I installed xampp and wp on my localhost. I successfully copied and installed in xampp/htdocs/xampp all the site files and the MySQL database file from an existing WordPress custom theme site online. I can open the website on my localhost and I can connect to the WP Dashboard on my local host. all messages and pages and the plug ins and everything is there. The site looks and works on my localhost, just as it does online. Yes.

  But there is a problem, and I just can't understand it. When I view the site on the local host - none of the navigation links work. For example, there are an 'INFO' menu nav element and a corresponding info page. I can see the INFO page and all of its contents in the WP Dashboard and change it in the editor dashboard. But if I click on preview, I get a "the requested URL was not found on this server.    The link on the referring page seems to be wrong or outdated. "error. the same thing happens if I click on the link in the nav menu. This is true for all the menu pages/nav links.

  I think that this is related to the permalinks and .htaccess file. If go to the section permalinks dashboard th GTE, which automatically results in a .htaccess file will be created at the root of the installation of WP. Once the file /htaccess is created I can't view the site on localhost. If I delete the .htaccess file I get the site back but with the nav link page not found problem

  I googled the problem and tried a variety of things, including the links below, but just can't make it work.

  http://www.lancelhoff.com/how-to-make-WordPress-permalinks-work-in-XAMPP/

  http://www.PHP-developer.org/htaccess-in-WordPress-XAMPP-localhost/

  Anyone here have experience with this and any suggestions? I am so close to have this job, but just can not pass it. TIA for any help.

  Disable the permalinks when working locally.

  Nancy O.

• Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  Original title:

  Octashape streaming system

  Hello

  A dialog box appears on my screen:
  Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  What should I do?

  And if this does not work between the firewall what is the solution?

  Thank you!

  [Moved from the community centre of Participation]

  You seem to have installed a useless program, Octoshape.

  http://www.bing.com/search?q=Octoshape

  You should be able to remove it from programs and features (or the list of installed programs, depending on your version of Windows.)

  Don

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• How to get the cpu host machine virtual mhz by PowerCLI

  How to get the cpu host machine virtual mhz by PowerCLI

  Thank you

  

  The following command of PowerCLI will list the maximum cpu MHz for all of your virtual machines from the host:

  Get - VM | Select-Object - property Name,@{Name='MaxHostCpuMhz'; Expression = {$_.} NumCpu * $_. VMHost.CpuTotalMhz / $_. VMHost.NumCpu}}

• I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hello Cy1989,

  Check the items below in your vCenter server.

  1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

  2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

  3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

  4 Vefiry database are running and all required database services are running...

• get the locale of the browser in jdev 12 c

  I have a multi-language application that it should change the language of the locale of the selected web browser.

  In the model layer, I was able to get the locale with this: myApp.getSession () .getLocale ();

  While the view controller I can check with this EL: #{view.locale}

  However, the application never change the locale. I'll try it with Chrome and Firefox.

  jDeveloper: 12.1.2.0.0

  HAVA a look at this thread, where I explained how JSF determines what locale use:

  Locale by default ADF

  If you want to force JSF to use specific regional settings, you must use the 'local' of tag attribute, for example:

  assuming that 'myBean' is a managed bean property "myLocale" contains the necessary regional settings. The property must contain a java.util.Locale object but not a string object.

  Dimitar

• Unable to ping the remote host IP address

  I have a home network with 2 desktop computers, printer, TV and BlueRay attached.  The PC is both XP and members of the same workgroup.  I can't get the connectivity between the PC 2.  With 1 PC, I ping successfully all connected devices, with the exception of 2 PC.  2 PC, I ping equipment successfully connected, including 1 PC...  I get the same information using a different router and a different network on 2 PC card.

  I tried the following steps of the Article 314067:

  1. check on two PC's TCP/IP configuration.  Result: good on both PCs.

  2. use the ping tool to test connectivity.

  • Ping the loopback address.  Result: good on both PC
  • Ping to the IP address of the local computer.  Result: good on both PC
  • Ping the IP address of the default gateway.  Result: good on both PCs.
  • Ping to the IP address of the remote host.  Result: bad on PC 1, good on PC 2
  • Ping other IP addresses on the network.  Result: good on both PCs.
  • Ping the host name of the other PC.  Result: bad on PC 1, good on PC 2

  Article:

  If the ping command fails, the remote host may not be responding, or there may be a problem with the hardware of network between computers. To the rule

  on a remote host does not respond, use Ping again to a different remote host.

  If you cannot use Ping successfully at any time, verify the following configurations:

  1. Make sure that the IP address of the local computer is valid and that it is correct on the

  Tab general of the Internet Protocol (TCP/IP) properties dialog or box when it is used with the Ipconfig tool.  Result: good on both PC

  Make sure that the default gateway is configured and that the link between the host and the default gateway works. For the purposes of troubleshooting, make sure that this gateway by default is configured. You can configure multiple default gateways, gateways after the first gateway is used only if the IP stack determines that the original gateway is not working. Diagnosis is to determine the State of the first configured gateway. Therefore, you can delete all the other gateways to simplify your task.  Result: good on both PC
  Make sure that Internet Protocol security (IPSec) is not enabled. According to the IPSec policy, Ping packets may be blocked or may require security. For more information about IPSec, go to method 7: Verify Internet Protocol security (IPSec).  Result: good on both PC

  Thanks for your suggestions you may have.

  Hello

  Firewall such as Norton, McAfee etc can cause a loss of network connectivity, even when the network is correctly configured. Try disabling the firewall on both computers to see if the ping works.

  Tricky

• Using the local host XAMPP with Wordpress and Dreamweaver

  I hope it's in this forum. It is probably more than one WP Theme DW, but I found this forum to be very helpful on a wide range of topics of web design/construction in general so here goes.

  I have a static website html/css, created with DW. I have like a local site on my computer and also have downloaded on a remote host (fatcow) server. It uses a temporary domain/address under development and will replace an exisitng site once completed.

  http://www.prospectrealty1.FatCow.com/index.html

  I installed WP on the remote host and created a Blog through the WP Dashboard. There is a link in the navigation of the static site on the WP Blog. When you click a new tab opens and puts it on the separate blog.

  http://prospectrealty1.FatCow.com/blog/

  I want to be able to work on a copy of the blog 'offline' on my local computer.

  So I have installed xampp and it works correctly on the C drive of my computer. Then I copied my entire local site folder in a folder under the xampp/htdocs. So, next I copied the folder that contains the installation of the remote host to fatcow wordpress (I named it 'blog'), I created and pasted in my local installation. So now I have localhost/xampp/perspective-blog-test/blog.

  Mark, the problem is that you are importing into a database.  Basically, what you have to do is this:

  -Connect to phpMyAdmin

  -Click on databases at the top (in the right frame)

  -Create a new database.  If you want to imitate as much as you can from the remote site, it exactly the same name.

  -Then click on this database from the base of the left hand.

  -Now you can click on import of the right hand of the window frame

  What you were clicking was previously the button import for a whole database and not only the tables in the database.  Because there was no import of data in this file that you and he had only tables, SQL server has generated this error.

• WRT54GL cannot get the PPPoE server IP address

  Try to get the WRT54GL installation and cannot operate.  I get "unable to get an IP address from the server. PPPoE. I followed the troubleshooting tips and repowered everything.  I've even set up the network using static IP address and it worked for a few days that their death. I hope that it died when the IP address has changed.  I've seen a few suggestions to make the connection, it done it via Control Panel > network connections > bridged connections? Help, please!

  I think I finally have this thing resolved!  Set up as DHCP and then another post I went to the router, and click configuration on the sub-tab page clone mac address, enabled and clicked done, saved settings and it worked! I really hope that it continues to work! Now, if someone could explain to me how it does the job, I'd appreciate it.

• Failed to get the IP of DHCP address

  Hi guys

  my laptop cannot acquire Ip address; am using DHCP and other laptops can get the Ip address using the same cable; Another said only: unidentified network. what may be the cause?

  Hi Geraldine,.

  Thanks for posting your query in Microsoft Community Forum.

  Portable computers are connected to a domain network?

  You can try to reset the TCP/IP settings in order to renew the DHCP configuration for all adapters. Refer to the following:

  Method 1:

  Try the steps from the following link and check:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows

  Method 2:

  Ensure that these services are started and set to Automatic. If you have problems trying to start these services, check their dependency services and make sure they are started and set to automatic as well.

  A key. Press Windows + R, type services.msc and press enter.

  B. in the search for services for the following services.

  DHCP client

  DNS client

  C. right-click on the service and click on Properties.

  D. set the startup type to Automatic.
  E. click Start to start the service. Click OK.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• need to get the time host was put in the annotation and maintenance mode

  Hi - it is possible to get the time that a host has been in maintenance mode and also seize any annotation is attached to the ESX host in VC?

  Thank you

  ~ Sai

  Also, by using "get-vmhost" twice is redundant since you have channeled from get-vmhost: "E = { get-vmhost $_ |}". Get-vievent ".

  However, your order will be to return the entire event object and look like:

  Name                                    Event

  ----                                    -----

  host {VMware.Vim.EnteredMaintenanceModeEv...

  You can try below instead:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. FullFormattedMessage-like"* entered maintenance mode *"} (). " Createduserid}}

  But it can still recover multiple events, so a way to get only the last event and time is below:

  Get-VMHost |? {$_. ConnectionState-match 'Maintenance'} | Select Name, @{N = 'Time put in MaintMode'; E={($_ | Get-VIEvent |? {$_. {"FullFormattedMessage-like" * entered maintenance mode * "} | toplayer-last 1). Createduserid}}

• HP ProLiant BL680cG7 and the local host on SSD Cache

  Hello community,

  At the beginning of the installation of an HP BL680cG7 blade, the ESXi 5 installation program shows me the local SSD drives configured as "remote storage".

  Very interesting

  Here is an Article on this subject:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1027819

  Or:

  http://communities.VMware.com/message/1687257

  But now my problem:

  After installation complete, I can´t enable "Cache host", because the configured local SSD are presented as "Non - SSDS' readers? !

  Anyone has an idea why I can't use the local SSD for the host Cache?

  HP SAS - SSD is not compatible?

  SSDS are pluggable drives to HP, 200 GB default host.

  Thank you, Jo!

  After installation complete, I can´t enable "Cache host", because the configured local SSD are presented as "Non - SSDS' readers? !

  Anyone has an idea why I can't use the local SSD for the host Cache?

  HP SAS - SSD is not compatible?

  If it is possible to check below links and if necessary you can run the required commands of "Tag as SSD devices"

  ESXi is unable to identify a device like the SSD (KB2008938)

  SSD not included in vSphere 5

• Change the ESXi host IP address

  Hello

  I have the following Setup for vSphere 4.1 and you must change the subnet:

  1 - host 1.0.0.1

  Host 2: 1.0.0.2

  Home 3 - 1.0.0.3

  vCenter - 1.0.0.99

  I need to move all my guests and my vCenter to a new subnet:

  1 - host 1.0.0.1

  Host 2: 1.0.0.2

  Home 3 - 1.0.0.3

  vCenter - 1.0.0.99

  I want to try a host first of so I moved all my virtual machines from the host 3.

  I can go on the pages of Configuration/network host and select Properties on the virtual switch containing VMkernel port of my network management - from there it seems that I can just change the network IP management settings. However, it is the right way to do it? I thought that the best thing to do is the following:

  1 disconnect the host vCenter

  2. connecting to the host directly using vSphere client

  3. change the IP address of the host management network

  4 reconnect to the host (using the new IP address of the host) using vCenter

  Should I switch to maintenance mode?

  The same operation can be performed on a host running VMs?

  Thank you

  Change the management IP has no impact on the virtual machines running on this host. To make a change of this nature, I often disable HA (either completely, or uncheck "Enable Host Monitoring" on the segment of HA configuration). This will ensure that the interruption in the availability of management so that the changes of property intellectual fires any sort of isolation HA event.

  HA, you should be able to make the change from the vSphere client attached to the host or vCenter. Just make sure that you have access to the consoles so you fubar the vSwitch and needed fix through tech support mode or the DCUI.

  You are afraid to have virtual machines on the host, if not in maintenance mode to evacuate VMs. It is not necessary.

  vCenter relies heavily on DNS, make sure that the new IP address reflects the input host DNS.