Driver for old HP Laserjet 6 p printer
I own an old HP Laserjet 6 p printer and just installed Windows 7. I can't find a driver. Any suggestions?
Hello
You can download the HP drivers from their official website:
http://WWW8.HP.com/UK/en/drivers.html
Thank you.
Tags: Windows
Similar Questions
-
where can I find the drivers for my hp laserjet cm2320 mfp printer
I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.
I couldn't find a driver for hp color laserjet cm2320 mfp printer. My system is win 7.
-You know what you have for hardware: HP Color LaserJet CM2320 MFP
So... what say you HP?
Hardware support - including the drivers and other software that allow the device to interface with other software and hardware - is the manufacturer of the hardware device.
This printer has been essentially abandoned in newer operating systems HP all in time, it seems...
http://h30434.www3.HP.com/T5/printer-all-in-one-software/CM2320-MFP-has-been-abandoned/TD-p/218486Although it should 'work '...
You can get the drivers and software, you can HP. Select your specific printer if...
-
need printer driver for HP Color LaserJet 3600n running Windows 8
Need printer driver for HP Color LaserJet 3600n running Windows 8
Click Next if you Win 8 pro 64-bit
-
LaserJet 1100: How to activate the driver for my HP Laserjet 1100
How can I activate the driver for my HP Laserjet 1100 downloaded my c:\1100 subdirectory? I unzipped, but what now?
Hello
This is a printer old vry much older than XP. Please follow the instructions below:
More information:
Kind regards.
-
Driver for HP Color LaserJet MFP Pro M PCL 6
64-bit driver for HP Color LaserJet Pro MFP M477 PCL 6: I have one of these printers, which is able to print double-sided automatically. The new driver (64-bit) will not accept when I switched to a new laptop, manual duplex printing. Does anyone else have this problem? I updated the driver, but the problem persists.
I managed to find the solution... it is a lot harder than I imagined composed I don't remember clearly how I found it. But I think it's what you do... Use the control panel to get to the devices and printers, right-click for properties of the printer, then select device settings, then select installed in the duplex unit. Yes... complicated. How the average dumb guy like me never to solve such a problem?
-
installed slow start with driver for HP Color LaserJet CM2320nf MFP
I have Windows 7 pro 64-bit installed. After that I installed the latest driver for HP Color LaserJet CM2320nf MFP, my network is not initialize 2 to 5 minuets and the PC won't start any programs until it does. The printer works very well after starting my network it's just frustrating to have to wait this long. I have the printer plugged into my Intellinet router and the printer set to DHCP for IP setting. I asked HP about this problem and they can't help me because it is a software problem and not hardware related
Edit: I have a program of snooper network called Netscan indicates the printer working group is "WORKGROUP" and my working group is "MSHOME". This would cause problems? I can't find a way to change the workgroup printers.
Jim
HelloPerform the check and the boot if the problem persists.To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: perform step 7 to reset the computer to start as usual after the boot process.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Hope that helps.
-
Please give the link to download the HP UPD PS driver for my new color CP152n laser printer, I am Anand.
I use professional windiw 64 bit os
Thank you
Pilot the site of the UPD is here: http://www.hp.com/go/up
You can download the driver of the UPD PS here: HP Universal Print Driver Postscript
I could only locate the LaserJet CP1525 and in the list of products taken in charge, the CP1525 is supported by the UPD.
-
I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.
Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.
Hello
Try to reboot the router and check if that can help you.
After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.
If it persists, try resettign the system as follows:
* Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
Click on the Apple menu and then click on System Preferences.
Select Print & Scan.
Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
Click OK to confirm the reset.
Type your user name and password.
Click OK. The printing system resets.Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.
Please let me know if this can help,
Shlomi
-
How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?
Original title: How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?
It is not listed in the list of printer drivers and I can't find anywhere on the web.
Hello
This article from Epson says that the driver is included in Windows 7.
I don't see any info out there that clearly explains how to add it. It simply States that you must go to "add a printer". Looks like you already did this well.
I would say following upward with support from Epson to see if they can offer some better instructions. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.
-
DeskJet 970 Cxi: Driver for old printer
I got a new PC for Windows 10, but can not find the driver for my printer - Deskjet 970 Cxi.
The previous PC which has Windows 7, I got a drivers and what update to Windows 10 the printer works fine.
Is it possible to get the old driver?
Thanks for your reply.
I tried the suggested steps, but they don't work - the printer is not directly related to the new PC. Your suggestion, however, gave me the idea to do the following:
1. connect the printer directly to the PC - in this case via USB - and try to install the new local printer.
2. Windows 10 recognized a new USB device and successfully - installed, this includes a large number of former drivers HP that were not available previously.
3. connect the printer to the original unit.
4. install the network printer using the driver of device discovered in step 2.
Thank you for your help.
-
I tried several times to use the original installation disc, the latest version of the software driver hp Forum, etc. All with no luck. And now, of course, my host system is all messed up with installs partial. I know it works because I saw another W7 - 64 box to connect to the same XP machine via the network. I need measures to clean first the disorder of my current box then the steps to connect to the printer on the XP machine over the network. This is similar to a question last may, who seems to have been abandoned.
Poster 8lives gives the following solution in another thread:
On the Win 7 computer...
Devices and printers
Add a printer
Add a local printer
Select create a new port:
Select Local Port for the port Type:
Enter the name of the network to the XP computer that is. \\XPcomputername\LJprinterid
Install the LaserJet 1020 driver when prompted
This did it for me.
-
CE712A: Driver for HP Color Laserjet CP5225 for Windows XP Professional
I can't find a driver for my OP de Windows XP Professional 64-bit for my CP5225 printer. Can anyone help?
In other words, the printer is connected to your network with a rj45 cable I guess. If yes you must go to the information on the printer menu and print a Setup page that will give you the address ipv4 of the printer. It should be something like 192.168.1.12 now on you computer xp go to printers and faxes and add printer. Local printer and do not check autodetect, then and on this screen, click on create a new port and the menu drop-down select standard tcp/ip, and then click Next. Type the address of the address of the printer (ipv4) that was on the configuration page and just keep on going until you get to the page of decision-makers. On the left choose HP and will work on the Strip right down to Color Laserjet 8550 PCL or PS as long as one or the other, and then click Next and change the name to HP CP5225 or whatever you want to call the printer and you can check on this page to make it your default printer. Complete and you should now be able to print to the printer.
-
Need Win 7 driver for my HP Deskjet 1000 c printer.
I need a driver for Windows 7, 64-bit, please, for my HP Deskjet 1000 c printer. Printer is old but works well with XP and large format.
Thanks to all those who can help you.Original title: hp deskjet 1000 cHi John,.
You can download the driver for HP Deskjet 1000 c printer on the manufacturer's Web site.
Check out the link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4066377#N216
If the problem persists, I suggest you contact HP support for help.
http://h10025.www1.HP.com/ewfrf/WC/contacthp?CC=US&DLC=en&LC=en&os=4063&Product=4066377&sw_lang=
Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.
-
Windows 8 driver for HP Color Laserjet CP 1215
I have a search for the player above for a 64-bit computer running windows 8 pro.
Hello
Thank you for writing to Microsoft Communities.
I suggest you to visit the following links, this could help you install the printer driver on the computer.
Software & Driver Downloads - HP Color LaserJet CP1215 printer: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=3422476#N166
More information: Find and install printer drivers: http://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers
Install a printer: http://windows.microsoft.com/en-US/windows-8/install-a-printer
Please follow these recommended steps and post if you still experience the problem.
-
I need a driver for a hp laserjet p2035n pcl5
An application here at work requires a driver for this printer PCL5 print correctly. I googled until my eyes bleed with no luck.
Hi again,
Please try to install the UPD PCL5 as follows:
In the past, that the version of supported PCL5 PCL5 emulation as well, however it seems he's changed in the latest version.
However, I think that it mght be used by manually configuring the driver as follows:
- Install the UPD PCL5 below:
http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=503548&prodNameId=503519&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=DS-99377-2 - During the day, make sure you select the traditional way.
- Select a local printer and leave the default as LPT1.
- After completing the installation, do a right-click the new printer icon.
- Click on Properties.
- Click on the ports tab
- Select the active port of the printer (USB or TCP/IP Standard for network printer) P2035n
If you are not sure, simply right click on the original printer icon, click Properties and check what port is selected as the current printer. the same port must be selected for the UPD as well.
Now try to print with the UPD driver, I think it should work.
Please let me know of any problems,
Shlomi
- Install the UPD PCL5 below:
Maybe you are looking for
-
run multiple programs in order
Hello I did 5 labVIEW program and they are not in sub VIs.But I want to run all these test an automaticlly. Is this feasible? These programs will be share the bulk of the instrument. I have done them in Subvi since they bounch of input setting. Thank
-
When the progressions referred to my Office I get two icons, one is a file folder, when I try to delete this two icons are removed from the trash how to solve?
-
I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.How can I go back to single screen?
-
My CD drive was working fine, then suddenly the door opens, and when I inserted a disc manually (on the computer has read very well just a few hours earlier), I got a message saying that there no disc.
-
Silver blackBerry Smartphone applications
Can anyone recommend an app simple money/finance for a blackberry 9900?