run multiple programs in order

Similar Questions

• Multiple profiles can be addressed by running multiple installations of Thunderbird; rather than put several profiles on a plant?

  Please don't laugh, but I'm running three quite separate mail programs Eudora on a PC; each one with a different email address. I have three icons, and emails are completely separate. I'm just trying to determine if I can do the same with Thunderbird. I know that you can configure multiple messages in a single installation, and then switch back within this facility. But I'm trying to see if I can keep doing what I'm doing now. I know that I have to open a new Eudora program for each email address, but I'm OK with that. Any thoughts?

  Eudora becomes old and unstable, so I would go if I can.

  Thank you very much.

  Although I don't really no why you must run multiple instances of tuberculosis, especially since the TB program folder and the profiles folder are separated, to do so are described here:

  http://KB.mozillazine.org/Run_multiple_copies_of_Thunderbird_at_the_same_time

• Cannot run multiple firefox version 4 windows

  The problem after the upgrade to FF4 began to occur. In ver 3 I used the Profile Manager and was able to run 2 windows firefox at the same time without any problems on Windows 7.

  Now when I try to do this with version 4, a firefox window-error "firefox no longer works."

  I thought that this was due to an incompatibility add on or something, so I made a withdrawal of the full program, rebooted, cleaned the registry and deleted all the files that firefox on my system. The problem persists.

  You can run multiple version at the same time if the next version is started with the - no-remote switch added to the command line in the shortcut to the desktop.

  'C:\Program Files\Mozilla Firefox XX\firefox.exe' - no-remote Pei

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• running multiple instances of VBAI does not work

  Hello everyone,

  We are 4 common examples of VBAI at the same time. Recently, he had to copy it (because production is doubly).

  With our first system, we have no problems when you try to run multiple instances of VBAI. This time, however, it does not.

  Our system:

  • 4 cams: Allied Manta 201
  
  
  • camera is triggered (rising edge) separately, but almost simultaneously.
  
  
  • Four port NIC (with the right driver :-))
  
  
  • 4 ports and our on-noard port are bridged.
  
  
  • computer: intel I5 (4 cores)
  
  
  • License to run Vision Builder 2012.
  
  
  • Programmed with Vision Builder HAVE 2012.
  
  
  • Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Action taken:

  • Test with our program that opens 4 instances of VBAI. Result: 1 single instance opens.
  
  
  • Removed our bridge a connected our cams on a switch. Result: 1 single instance opens.
  
  
  • Open VBAI 4 VBAI-programs directly (but separately). Result: Each program opens and is fully working.
  
  
  • Open 2 programs at the same time (with VBAI). Result: Fist opens and is equipped with the work. At the opening of the second program, that we get error messages saying that it is not possible to connect with our camera.
  
  
  • The test above was created with:
  
  
  1. The cam connected to our network card 4 ports.
  
  
  2. The cam connected through a switch.
  
  
  • I have also written 4 simple programs (just enter a period followed by image)
  
  
  • With these programs, I tried the above test (VBAI 2 hours and run both programs at the same time). Same problem: 1programs starts, the error messages when opening a second program.

  I have the impression that it's a network problem, but what bothers me is that, when the bridge, I don't see a difference with our another computer that works on our original assemblyline. When you work on a referral that our parameters are the same as on a computer that does not have a network card 4 ports. The computer (and liked)) allows us to run multiple instances.

  Any thoughts?

  Any help would be greatly appreciated. I'm sure I'm missing something obvious here, but I don't really see.

  If you need more information about something, let me know.

  With sincere friendships.
  Tom Declercq

  
  

• Can I get a "schedule" of labview makes when it runs the program?

  Can I get a "schedule" of labview makes when it runs the program? that is how long it spends making each sub vi, and what order it's them.

  See you soon

  The execution Trace Tool kit is an add-on. If you do not your package of discs... maybe try a demo version?

  Spy OR get loaded with BT (or one of these things).

  Start > programs > National instruments > NI Spy?

  Ben

• Need for other computers on the network to access my laptop computer to run a program

  I installed a program on my computer that acts as a service and I now need to install the application on other computers on our network.  Other computers need point to my computer in order to run the program.  Even if I set the program to point to my ip address, it fails.  Do I need to add a player shared or mapped on each computer to see my computer?  I am new to this and I would appricate all the assistance.

  Thank you.

  CAT

  You should check with the technical support of the mystery about its requirements for network program. Client/server different programs have different requirements. Certainly, you must assign your portable computer a static IP address. If the laptop is not always in the office or available, it is not really the choice the most suitable to host the game server a program. But presumably you know the better your situation and feel that the laptop will work. MS - MVP - Elephant Boy computers - don't panic!

• Get random errors every time I try to run some programs/Installer

  So whenever I try to run something I downloaded for example: microsoft .NET framework, I get the error "could not find the volume of extraction of the file. Make sure you have the appropriate permissions. »
  Then I go and do a right click on this program, click on "add to archive...". "and when I add it to winrar and run through winrar it everything works fine without errors.

  Here is another example when I try to run some other installer I get the same error «Setup could not create the C:\Users directory...» "Error 5: access is denied."

  Or an error like this "runtime error!" "Program C:\... abnormal termination of the program.

  I have tried every thing and nothing worked pls help, it seems that I have some problems with the permissions and I can't get it fixed.

  The only solution is to add the winrar program and run it. But I want to solve this problem completely. Help, please.

  Edit: So I've downloaded again the framework and received the error «You have not enough space...» "and I like 800 GB free in both drives Idk what is happening with this random errors.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you have the problem with random errors when you try to run certain programs on the system.

  Certainly, I understand your concern and will try my best to help you.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  Try to run the troubleshooter of performance and check if it helps. Please follow the steps outlined in the article below.

  Note: The resolution of performance problems check issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  If the problem persists, follow method 2

  Method 2:

  I suggest you try to follow the steps in the link given below and check if it helps.

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how run the tool (SFC.exe) System File Checkerto scan your system for files and to repair the system missing or corrupt files in Windows. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 3

  Method 3:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Compatibility "run this program in compatibility mode for" not showing "Windows XP (Service Pack 3).

  Hello

  I have multiple copies of Windows 7 Pro x 64.  Click with the right button on a program and select 'Properties' and then click on the Compatibility tab, most of them under "run this program in compatibility mode for" a ton of options going all the way back to windows 98.   Several have only options for Windows Server 2008 and Windows Vista.  I need "Windows XP (Service Pack 3)" as an option on all computers.  I don't see where you install.  My research are presented only how to install a Windows XP virtual machine, I must separate environment, I need this option so that the program works on computers (it can change the routing table, and makes to the virtual machine is not useful).

  What must be installed to the "Windows XP (Service Pack 3) option appear?

  Thank you

  Charlie

  If the program in question can be run in compatibility for a specific version of the operating system, then the option will appear in the drop-down list.

  Not all programs can be run in compatibility for all versions.

• How to configure Task Scheduler to run the program when the connection is established

  Windows 7 64 bit
  Dial-up Internet access

  I want to use the Windows 7 Task Scheduler to run a program IMMEDIATELY AFTER a dial-up connection is made to the internet.

  How can I configure the Task Scheduler in Windows 7 to do this, please?

  I am familiar with the Scheduler of tasks with the command line parameters.  Any help is appreciated.

  Thank you

  FYI: If an example is needed, Microsoft Security Essentials can be configured to update virus through this path with the argument definitions:

  C:\Program Files\Microsoft Security Essentials/MpCmdRun.exe SignatureUpdate

  Maybe someone can use it to show how to configure the Windows 7 Task Scheduler to update MSE virus definitions, once the connection dial-up was made?

  Otherwise, for example, another program to run once established a dial-up connection would be OK, thanks

  Hello

  Scheduler of tasks is time driven.

  For order-driven event, you need a script.

  Question like that is much better treated in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Card rules do not run in the correct order

  Hello
  
  I am using FDM 11.1.2.1.
  
  I imported data and used the card rules: mapping was not what you expected, so I had to modify the sequence of the rules on the map.
  So I updated the sequences of the rules on the map and re-validated (even re-imported) = > I still have the same problem: the card rules do not run in the correct order.
  
  Below is an example of a line imported with this problem:
  
  Export of the import mode:
  PARTITIONKEY | CATKEY | PERIODKEY | ACCOUNT | ENTITY | AMOUNT | * UD5 *.
  749. 12. 2011-03-31 00:00:00 | 60413031 | MM31N0 | 773. * 000000 *.
  
  Rules of the card for the dimension of the UD5 (exported from FDM) (sorry it is not well presented :-/))
  
  %{DIMNAME/} SRCKEY SRCDESC TARGKEY WHERECLAUSETYPE WHERECLAUSEVALUE SEQUENCE VBSCRIPT PARTITIONKEY
  749 UD5 MTN424 project MTN424 MTN424 1
  749 UD5 R_PROJ_AXMECH project AXMECH #SCRIPT IN * 2 * ' * If Left (varValues (15), 2) = "" MM"" Then. "
  
  * Result = ""AXMECH *"
  Else if varValues (15) = "" MSIND0"" Then
  Result = ""AXMECH"
  Else if varValues (15) = "" MSTLP0"" Then
  Result = ""AXMECH"
  End If '.
  UD5 749 * 000000 * project undefined PROJET_NON_DEFINI * 3 *.
  749 UD5 R_PROJ_AUTRES other projects * AS * 4
  
  If despite the sequence 1-2-3-4, the UD5 000000 is mapped to PROJET_NON_DEFINI (rule explicit map with sequence 3) instead of AXMECH (IN the rule of the map with sequence 2).
  
  Thanks in advance for your help
  
  Fanny

  The card sequence numbers have effect in a single mapping type (Explicit, between, in, analogues), not through multiple types of mapping only. Explicit cards always take precedence.

• Run multiple chooses due to several input values (need help in SQL)

  Hello
  
  I would need to run multiple SQL select statements I get input of several results of the subquery. In my test case, I get three 3 results of the subquery
  
  Select ALL_TABLES where LAST_ANALYZED is not null AND OWNER of TABLE_NAME = "IHS" AND TABLE_NAME LIKE '_TBL_PROCESS %' AND (SYSDATE-LAST_ANALYZED) < 1 order by (SYSDATE-LAST_ANALYZED
  The complete query is:
  
  SELECT SDE_ID, SERVER_ID, REGISTRATION_ID, TABLE_NAME, CONNECTOR, START_TIME, NODENAME OF THE
  
  * (select ALL_TABLES where LAST_ANALYZED is not null AND OWNER of TABLE_NAME = 'IHS' AND TABLE_NAME LIKE '_TBL_PROCESS %' AND (SYSDATE-LAST_ANALYZED) < 1 order by (SYSDATE-LAST_ANALYZED)) *.
  
  Can someone help me to get the appropriate SQL code?
  
  Thank you
  Dejan

  Right. I should have put a comment explaining that. I used the name A_TBL_PROCESS because the WHERE clause has
  'AND table_name like '% _TBL_PROCESS' ' then yes that should be a table name that will be selected.

• Which user account you want to use to run this program?

  That fairly recently, when I click to start Firefox, and just before it actually opens, I has the following screen:

  "Which user account do you want to use to run this program?

  I did some internet research and it seems as if many people have encountered this same problem.

  What is the cause, is it dangerous for my computer, and how can I get rid of this message?

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• I can't uninstall Firefox. I tried my Add/Remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it won't work. Firefox is the only program that I am not able to uninstall u

  I am unable to uninstall Firefox. I have tried my add/remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it will not run. Firefox is the only program I am not able to uninstall using the normal methods
  

  This has happened

  Just once or twice

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR = {357DAD02-321A-4E1D-8305-C8CE3D8CA934}; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 2.8; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  I ' v tried running C:\Program Files\Mozilla Firefox\uninstall\helper.exe.
  It does not work.

• Cannot run some programs after system restore to remove the virus

  Hello

  Toshiba my duaghter had a nasty virus that pretends to be an antivirus software product, which sneaked in, between the time his default service Norton has expired and I had the time to install Trend.

  Can not remove it using trend, so on the advice of a friend, decided to make a windows system restore to a point before the infection. It worked successfully and the virus has disappeared, but now she can't run some programs, I tried to reinstall Trend, but fails because he says you must first uninstall Norton. But I can't run Norton, or uninstall, and certain folders on C: are no longer accessible.

  I have to do a full restore of the Toshiba System (IE back tofactory settings? This seems a drastic measure, but the issue is beyond my meager knowledge of PC.

  Thank you

  Graeme

  Hey Buddy,

  Hmm... This announcement is a bit confusing... Maybe the programs you want to say were installed after the system restore point, who knows?

  In my opinion you must reset the laptop configuration that you have already written. This will restore the pre-installed Windows version where everything is working correctly and that all the drivers and tools are installed.

  Therefore, you only need the Toshiba Recovery disk and boot from it. This will restore the factory settings.

  Check this box!

• I need to convert programs written in Labview 8.5 in Labview 2012 when I want to run these programs in 2012 of Labview VI?

  I have VI moreover written in Labview 8.5. These programs can work well in labview 8.5.  Should I convert these programs VI Labview 2012 when I want to run these programs in 2012 of Labview? Thank you.

  LabVIEW 2012 can open the screw of from 6.0.  But if you save them in 2012, you need to perform a "save for precedent" to get back them to 8.5.

  This resource may be useful:http://www.ni.com/white-paper/8387/en