Driver_irql_not_less_or_equal blue screen Vista and can not restart

Similar Questions

• conmputer crashes and blue screen appears and the computer restarts

  my computer guard crash blue screen appears and then the computer restarts, reinstalled windows xp and the problem persists

  If you reinstalled Windows, then you can be sure that it is hardware related.

  The three most likely culprits are the processor, graphics or RAM card. Unfortunately exactly identify the problem will always be tricky unless you have access to the spare parts that you can switch to turn.
  Neil
  www.nwarwick.co.UK

• May not start XP all we see is the arrow on the pointer on our screen... can not restart even in safe mode

  compuer ran great.
  do you have a small email campaign using mailchimp marketing
  everything was going well and next day compuer will not re-start.
  all we see is a blank screen and the arrow on the pointer.
  It does not restart in safe mode. When it goes to safe mode, we see is safe mode on move it left and right and some scrambled words on top. Thank you, Joe

  Joedir,
  Go through this post and make sure that you have tried all the listed items: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  If you still have a problem, then try starting mode safe mode with command prompt and run the following command: chkdsk/r http://support.microsoft.com/kb/315265 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen Crash and can't understand why.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: 7f
  BCP1: 0000000000000008
  BCP2: 0000000080050033
  BCP3: 00000000000406F8
  BCP4: FFFFF80002ED3D2D
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\042413-13759-01.dmp
  C:\Users\Sean\AppData\Local\Temp\WER-21200-0.SysData.XML
  Here are my specs:
  Win 7 64 bit
  Intel I7 - 3770 k
  Gigabyte Sniper 3
  4 sticks DDR3 Corsair Vengeance 16 GB
  Corsair HX1050
  Two Gigabyte Radeon 7950's Crossfire
  Two 120 GB SSD Raid
  Two hard drives secondary drive
  I tried what I could think of, re installed the drivers, took a map and am now running a GPU, formatted my HD and and re-installed windows. Looked like a dump of memory then only use a barrette memory to see if one is a failure, but it has blue screened on more than a stick. Until I formatted my hard drive, I thought it could have been my overclocking on my CPU, but I'm back to run the original settings. It's very random when it blue screens. Never happened while gaming, but randomly when im surfing the web, watching Netflix, or just leave it would screen out it will be blue. IM out of ideas. I was sure it was a stick of memory, but it has so far, happened on two different sticks of RAM while running a stick at a time. All thoughts.

  What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?

  Please download and run the display driver and download a copy of the report he produced on your sky player.

  http://www.NirSoft.NET/utils/DriverView.html

• Satellite Pro S300 - screen is blank and can not restart

  A week ago, I left my Satellite Pro S300-EZ2502 at night (as usual). It was fine tonight.

  The next day, I got a black screen and a flashing light orange on the left side. I tried to turn it off, don't restart, no dice. I tried removing the battery and restart under just current alternative, nothing, I tried the opposite. Nothing. I tried to let the battery and then recharge. No help. Very rarely when I plug it in again, I will get the green light for a few seconds, but then again the yellow flashing light. Nothing EVER on the screen.

  I've only had this laptop since MAY! What's wrong!!

  Have you installed extra RAM in the system?

  Try to remove one of the Modules or swap them around.

  Otherwise, it may be a motherboard problem. An FSL can repair it for you - free if its under warranty.

• I reinstalled Windows Vista and can not reactivate with my key now... What do I do?

  Hello. I own a copy of Windows Vista Ultimate x 64.  It's the Builder pack and I used this license for 2 other computers I built bringing the total number of machines to 3 that it runs currently on.

  My question is this... I did a clean install on my PC twice since the original version, and now I can't reactivate Windows, what should I do?

  I don't have anything in the original documentation that came with the program which provides a limit to how many times this key could be used to register Windows.

  Any help with this is greatly appreciated... Windows expires today if I can't find a way to activate it :(

  If it's a plain OEM version is good for 1 activation, there is "Generator of Packs" as similar to Amazon I post that are good for 3 activations: http://www.amazon.com/Microsoft-Windows-Ultimate-32-bit-Builders/dp/B000LP5EMS

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Satellite - black screen and can't restart with the recovery disk

  I have a black screen and can not restart with the restore disc but it seems to be.

  I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

  Hey,.

  This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
  You can start Windows or access the BIOS?
  You must post a few more details, otherwise we can t help you :(

  Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

• Repeated error DRIVER_IRQL_NOT_LESS_OR_EQUAL blue screen

  I replaced the motherboard and reinstalled Windows 7 HP. I get repeated DRIVER_IRQL_NOT_LESS_OR_EQUAL blue screen errors. Can anyone help identify the problem. I have the available minidump and the available XML files.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 19
  BCP1: 0000000000000003
  BCP2: FFFFFA80069C5560
  BCP3: 0000000000000000
  BCP4: FFFFFFFFFFFFFFFF
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\100112-18439-01.dmp
  C:\Users\Michael\AppData\Local\Temp\WER-28048-0.SysData.XML

  Thanks for your useful notes. In this case, a MEMORY_MANAGEMENT error appeared before that I could answer. The fault was found on the motherboard. Replacing, it solved the problem. Thanks again.

• When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image

  When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?

  Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."

• I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

  I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini092911 - 02.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 116
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

  AND:

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  WD-20110929-1029 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
  is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
  and ask in their forums known issues.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  ----------------

  BCCode: 117 0 x 00000117

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
  of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

  2 are looking for Virus/Malware.

  3 check the hard disk for errors - run Checkdisk (see below)

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Equium P300-19O - black screen and does not restart

  My Equium P300-19O had a blue screen of death after a few accidents occurred due to a broken Windows media player which 3 safe resets and then I get a blue screen of death.
  I restart the laptop, but now I have past the toshibia load up, but do not get further rather get a black screen with a dash flashing in the upper left corner.

  Please suggest anything that could help me get the laptop again.

  Hello

  Have you checked if you can boot into safe mode? You can try to start in safe mode if you go into the advanced boot menu by pressing F8 after you have switched on the laptop. Here you can choose.
  Maybe you can also try a system restore to a previous state.

  If it doesn t work it should boot from the recovery disk Toshiba and reinstalling Windows.

• my computer told me to repair windows.and everytime I try I get a blue screen. It does not start in any mode without failure. I just get a blue screen. Thany you shane

  whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.

  Hi leonardhurley,

  Since when are you facing this problem?

  You did changes before this problem occurs?

  What is the exact blue screen error message you received?

  Method 1

  I suggest that you perform the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.

  Method 3:

  I suggest you to follow the article below for the Blue error screen.

  http://support.Microsoft.com/kb/958233/en-us

• Web page does not display the toolbar or dashboard and can not resize screen

  I'm unable to decrease the size of the screen when you use the web to display the toolbar tool and dashboard.  I went through different places to try to find a correction, but I can't find what I did accidentally or what the computer did to cause this problem and how to fix it.  Thank you for your help.

  Hi Nancydo,

  What application are you when you mention that you "use the web" and can not see the dashboard and toolbar?

  If you use Safari, the menu bar, are you able to click View > actual size?   Otherwise try file > close all windows in Safari.

  Have you restarted the computer?  Many times this will reset all default settings, including the sizes of windows.

  Also, check system preferences > display and make sure that the option "by default to display" is selected for the resolution.

  The resources below will provide additional information on the preferences of the system in general and the display options of Safari in particular.  Your profile says you are using OS X Lion.  These resources are for OS X Lion of the mountains, but they are very similar.

  On the display of system preferences pane
  https://support.Apple.com/en-us/HT202532

  The basics of the Mac: Safari 6 in OS X Lion mountain
  https://support.Apple.com/en-us/HT202525

  Have a great day!

• Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

  How do you partition the disk?

  This is what app or OS that do you?

• updated to IOS 9.3 and can not get the screen acativation

  Updated for IOS 9.3 yesterday and can not get past activation screen

  There is a known issue with iOS 9.3 and there is still no specific treatment. The ideas below can help, or they may not. It has been a success among others and no simple way to resolve the situation.  You can judge if you want or you can just wait and see if it fixes itself. The problem is most likely on the end of Apple, which means it is not much end users can do until it is resolved.

  Some have suggested to go to icloud.com, sign in with your apple ID and remove your device from your cloud account, and then try to activate again.

  Others have suggested to simply try to restore the factory via iTunes on your computer settings.

  The restoration works for others once they go to iCloud.com and remove their device.

  Option 4 is just wait and see when Apple can issue a fix.

  You can connect to iCloud here

  https://www.iCloud.com/

  And here is a step by step on restoring your device if you want to try it.

  http://support.Apple.com/kb/HT1414