driver not installed reinstalls automatically when I reboot, need to reinstall automatic shut-off

Similar Questions

• "Driver not installed successfully", the error message when you use the new MP3 player.

  I recently bought a Sony Mp 3 (model NWZ-E384) Player.

  When I connect the USB I get an error message will appear in the lower right corner on the screen saying "driver not installed successfully.

  Why am I seeing this? Better yet, why am I this problem? My previous Sony Mp3 worked fine with Windows 7.

  Is there a round work to install the device driver on my PC?

  Thank you very much

  Ian

  Don't know if this helps Sony - https://ca.en.kb.sony.com/app/answers/detail/a_id/42390/c/65, 67/p/57784,59687,59925,80740 / (from their support pages for the NWZ-E384 - http://esupport.sony.com/CA/p/model-home.pl?mdl=NWZE384&template_id=1®ion_id=3&tab=howto#/howtoTab ).

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Dell Inspiron webcam driver not installed

  I have a dell inspiron that was very virus-ed up and does not properly, I bought my neighbor. I worked on it every day until 02:30, and it works fine. but when I try to use my central thing webcam it says driver not installed. I tried to find a driver online because I have no CD for my laptop. If someone could tell me please a link so I can download the driver please do. Thank you

  Try this version and then update

  Dell-Webcam-central.Software.informer.com/download

  You may need to uninstall the currently installed version

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• "Ultranav driver not installed" - X 300

  Hello

  I can't use my trackpoint. If I press Fn + F8 it say "ultranav driver not installed." But it is installed (you can see it in the installed programs and features). It is enabled in the BIOS. A usb mouse works.

  He used to work unti update of the BIOS (via system update).

  IBM Hotline recommended to reinstall VISTA Business...

  Anyone know of a better solution?

  Thank you.

  Kind regards

  Christof

  I had this problem on the X 220. I wasn't actively install or update anything. It's just... happened.

  Disable the touchpad in BIOS active the trackpoint, just as you described.

  He (I restarted between the two) reactivation, enabled on. They both work now as if nothing had happened.

• Driver not installed Ethernet

  driver not installed Ethernet.

  64-bit windows 7 works very well but a repair that says that I need an ethernet driver...

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur either because of corrupt network driver or settings.

  I suggest you to launch network troubleshooting and check if that helps.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, follow the steps in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Multimedia audio controller driver not installed on Windows 7 (32-bit).

  Multimedia audio controller driver not installed. I am running Windows 7 (32 bit).

  Hello
  You download and install the driver for the multimedia audio controller from the link:
  http://www.MECER.co.za/
  If the problem persists, please contact Mecer support for assistance:
  http://www.mustek.co.za/contact-us.html

• I use windows 7 64-bit edition Home premium and I cannot connect to access database in java program.it shows error database connection driver not installed.

  I am using windows 7 64 bit home premium I installed ms office 2007 and did all the settings.
  but I am unable to connect to the Access database in java program.it shows error database connection driver not installed.
  Please give me the solution...

  Hello

  I suggest you to ask your question about Java programming forums on the subject.

  https://forums.Oracle.com/Forums/Forum.jspa?forumid=922

  You can also ask your question on the forums to access.

  http://answers.Microsoft.com/en-us/Office/forum/access?page=1&tab=all&TM=1349633636662

• Blackmagic driver not installed

  Windows 7 Ultimate after first pro cc 7 install rolledback and Blackmajic driver not installed.

  Post edited by: Kevin Monahan
  Reason: change spelling in the title to be more searchable

  You have a switch on your platform?

  The current driver is 9.8 for BM intensity Pro and IO video cards.  It works perfectly on my Win 7.

  Download and try to install.

• Satellite C650D/006: LAN driver not installed in win 7 installation custom

  Hi everyone, I bought a laptop Satellite C650D/006 yesterday from the original owner and he is 5 months old, but I don't like the installation of Windows 7 Home premium 32 bit OEM toshiba so I deleted from the hard drive and installed a complete installation customized windows 7 Edition home premium 32-bit and active with the OEM - COA key on the laptop.

  http://www.MyToshiba.com.au/products/notebooks/satellite/C650D/psc16a-006011/overview#details

  After installation, I noticed that the LAN controller has not been installed in Device Manager so I couldn't of internet connection to run automatic updates of microsoft for win 7,

  I went to the toshiba website and download the driver of network for this laptop and I installed it manually, and after that the laptop has been connected to the internet via an ethernet cable.

  can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.

  see you soon

  > can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  If I understand your message, you have deleted the preinstalled Toshiba OS and installed a clean Win 7 OS in this notebook. Right?
  This means that all drivers must be installed after the installation of Windows.
  In some cases the Win 7 use standard Microsoft drivers that are part of the operating system and some devices may be recognized automatically, but in most cases you will need to install the correct drivers.

  > even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.
  Than other cell phones use the same chip as C650 LAN card? I doubt not all laptops use the same LAN chip, which means that different driver must be installed.

• DIFx Driver Package install error = 536870141 when you try to install the MFL-ProSuite for a Brother MFC-J870DW printer all in one

  Hi everyone, I have read the various issues pertaining to the Brother software and the IS052 error that I got also.

  I spoke with brother two times and they tell me that I'm missing a driver and if I sent the error message DIFx Driver Package install error = 536870141 to Microsoft, they would be able to provide me with the driver I need.  Brother also had me try to install from the disk and also on their site and I got the same error.

  I am a home user, so not very technical when it comes to drivers, etc..  I know that you need.  So please don't you technique on me.  I have been messing around with this now for almost 2 weeks and can that copy and print.  I can't scan or fax due to this error when you try to install the software.

  I have the disk with the drivers on what I did when we first got the computer.

  I use Windows 7 64-bit.  I really need help so I hope that there is someone who can solve this problem.

  Thank you very much

  Judy F.

  SW Florida - USA

  Karthik, sorry it took me so long to answer.  I hate it when people do that to me then again I am sorry.

  After trying your suggestions, nothing seemed to work so I asked my son who is a type of systems to help me.  I he provided with suggestions and error message, etc..  He read about all this and then remote connected my suburb.

  He renamed the errorlog and then tried to reinstall the Brother software and got the error.  He was then able to read this file was causing the error without reading through the tone of the error messages.  It turns out that there is a file that brother was looking for in one place, but it was in another.  He copied to where brother was looking for her, has done a reboot, loaded the software without problem.

  I am now scanning and everything works as it should.

  So maybe it's the same problem that others causing a problem.  If they can get the steps to find the error Log, look at the error message that is created in the error log, which will tell them what brother file cannot find and then go from there.

  I don't think I could have done myself, but he knew where to look for such things, and I don't have.

  Thanks again for all the help I got from this forum.

  Judy F.  (a happy user of printer Brother)

• Ocean optical usb 4000 driver not installed successfully

  Hi all

  I have 4000 ocean spectrometer optical usb. I want to acquire its data in LabVIEW. For this application, I have downloaded the driver of instruments OR site (http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=7833BD4A31DA1274E04400144FB7D2... I copied the project in the instr.lib directory and install the driver using the Ocean Optics USB4000_vista.inf file as shown in the installation instructions, then I restart my PC and connect the spectrometer and windows was successfully able to install driver for my spectrometer and I was able to run the example VI as well. But the next day when I tried to connect the same device, windows was not able to install the driver and showed the message "not able to install driver. I tried to update the software of the driver from the Device Manager, but it shows "Windows could not install your unknown device", so I uninstall the driver and reinstall it but still got the same error.

  I use LabVIEW 2012 (32-bit) on windows 7 64 bit system.

  Help, please.

  Hello

  Yes, my problem has been resolved. There was a problem in the EEPROM of the spectrometer. It has been altered. So I reprogrammed the EEPROM and the problem is no more exist. Now my system is able to detect the device and data are also acquired using LabVIEW.

  Thanks for your reply.

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/