Similar Questions

• Work very well iMac 27 mid-2011 with 4MEM error code

  Hi, I have an iMac 27 inches, mid-2011 with 4 GB installed original (Elpida so-DIMM) so I improve it with 4 new 4 GB Kingston (ram value) KVR1333 PC3-10600 1333 Mhz DDR3 DIMMS for a total of 16 GB, after that my iMac works very well for three years with the daily use of any question and everything seems normal in "about this Mac" and in the "memory" tab no software issues no kernel panic , anything with a strange behavior, until three years after the upgrade memory, now I run AHT because the other reason (I can't work with a new MBP Mid 2012 airdrop both with El Capitan OS X) and it shows me a 64/4MEM/40000000: 0x8893cb98 error code, I reset the NVRAM and SMC, and same result AHT , so use MemTest86 from a V6.3.0 of bootable CD (full test upward at the end time spent 23 hours) and V4.3.7 showing no error in the two tests, also I ran mdsched.exe RAM Memory Sticks Checker windows (I have Windows 7 64 bit family Premium installed in bootcamp) and no ram detected error.

  While I should care that error? should I change my Ram modules?

  Thanks in advance

  You have a faulty memory card or the slot. That's what the error means generally. Make an appointment with the Apple Genius Bar for the service. If you need a Apple Store - find a store - Apple.

• using IMac and HP printer printer error code

  I have an IMac OSX Version 10.6.6 connected wireless through Airport Extreme for a HP Photosmart Premium Fax C309a Series.

  I am trying to print and get an 'Ink system failure' error code of "Oxc19a0025" on the small screen of the HP printer.

  The instructions on the printer display saying "turn printer off, then on.  I did this several times, but to no avail.  I also unplugged the printer and when I plug it in again, it evokes again the error message.

  I've never run into this problem before.   The power levels of ink on the screen of my Mac show adequate levels without warning 'Low Ink'.   The small screen HP printer won't lift a warning error and so I can't check the installer to see what levels that shows.

  I have verified that the Support Forum and the HP Mac website but can't seem to find anything about that.

  Question is what is the problem and how to fix it?

  Indeed, you will have an ink system error.  Generally, it is not because of your supplies, but the print head.

  Remove the supplies.  With the grey lever on the right of transport, remove and reposition the printhead Assembly.  Install the ink cartridges and try again.

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene

• InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  You must install the Adobe programs since the original installation programs. Never migrate from a backup.

  Activation Adobe should detect a computer when the material has not been changed.

  If this isn't the case, you must contact Adobe support.

• Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  As I said, I'm Windows as well as a few links saved, I have ZERO idea what to do with a Mac

  Link for download & install and installation & activation problems can help

  -Cat http://www.adobe.com/support/download-install/supportinfo/

• installation of photoshop cs4 on an iMac and get the error code of license for this product has stopped working.  What should I do?

  have the cs4 on a disk and installation on a new computer with no disk drive.  Drag the application to a stick and transferred to the new computer file.  but get this error code when I try to open.  any ideas?  Thanks for the help

  Sorry, BUT I must ask you if you followed the "important Instructions" as I've said above. Here is the screenshot:

  

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• 4MOT/4 Error Code / 40000003:HDD - 1229

  I ran AHT and has got a unique error code-

  4MOT/4 / 40000003:HDD - 1229

  Disk utility does not show a problem. It is a mid 2010 27 "iMac. Do I need to have the hard drive replaced?

  Test hardware error Code: "4MOT/4 / 40000003:HDD - 1229" on 2011 27 "iMac i7. Help

  more

  4MOT/4 / 40000003:HDD - 1229

• Why mac won't erase the files - 43 error code

  I have an iMac that runs on the Version OS X El Capitan 10.11.3.  The processor is 3.2 GHz Intel Core i5 8 GB 1600 MHz DDR3 memory.

  For these last days, I was unable to use the move to trash function.  "Whenever I try to delete a file, I get the following error message:"

  The operation cannot be performed because one or more required items be found.  (Error code - 43) "I have so don't know why it happens suddenly.

  I checked to make sure that the software is up to date.  How to restore the move to trash function?  I am a novice and do not want to rely on

  using the terminal each time that I want to delete a file.

  Someone help me please.

  Restart the computer and see if the problem goes away.

• Repeated (-4 and -43-54) error codes

  Hello. I suddenly have real problems with my Mac (iMac desktop into 2007, El Capitan 10.11.12 running version). It is possible that this has happened after upgrade to El Capitan as well that I've updated several weeks ago, that I have not used it much in the meantime.

  The first thing I noticed is that when you try to synchronize and back up my phone (a 5s iPhone I had for centuries and still been able to sync properly - running 9.1) it returns an error message saying "failed to attempt to copy to the disk Macintosh HD." An unknown error occurred (-54). I had a quick search on here and found a few suggestions - restart the computer, restart in safe mode, remove the version of the iTunes library file .xml, try first aid in disk utility, check the permissions - all to nothing does not.

  A few days later I tried again hoping it might just have it fixed itself, but unfortunately it didn't. The same error message is coming, but this time the unknown error is - 4 and non - 54.

  I also noticed that when I try to delete all of my files - documents, photos, either - I now get a different error message: "this operation cannot be completed because one or more required items be found.» (Error code - 43) ». I can open one of these files without a problem, but do not occur just to delete.

  I am really confused and have absolutely no idea how to solve this. I'm quite concerned so any help would be greatly appreciated!

  Please connect to the iTunes Store, and if you use iBooks, iBooks store as well. If you use iCloud, connect to that, too. Then log out of your account in OS X or restart the computer. Test.

  If the error persists, you may need to select

  Parameters ▹ ▹ General Reset ▹ Reset all settings

  on the mobile device.

• error code: RNN7892

  New iMac. 5 days. Today using Safari, I get

  System alert. Brewer blocked for security reasons. Apple has detected a * (sic) virus has infected your system. Error code: RNN7892. To set the call Apple network and security at 1-866 = 9010-7478.

  Yes, I did. Then I realize it was BS. (so do not call this number).

  I turned on my firewall. Bought Norton Security.

  Earlier I had a sugar.sf download file on my system... *?

  Any help, advice, etc., welcome.

  You don't need Norton on an iMac.  He'll probably do more harm than good.  The attack that you met only assigned to your browser.  Simply leave Safari (force quit if necessary) restart Safari holding SHIFT and then clear history and delete cookies.  Check the Safari extensions and remove the items that you do not recognize.  Disable Java unless you absolutely need.  If you call this # and gave them information as the data of the credit card (or Bank info) then call your company (or Bank) credit card and tell them it is composed.  If you enabled them to gain access to your computer then your computer is compromised, and you don't know what they could have been installed.  You can call apple and ask them what to do.

• Error code: 0x8007045d__

  I'm trying to install Vista x 32 SP1 in my computer but appeared with the above error code when the expense of files. Message saying that "Windows cannot access the file D:\Sources\Install.wim,Make that all files required for installation are available, and restart the installation. "" Error code: 0x8007045D.

  Can someone please help? Thank you.
  My computer
  2007 iMac
  2 GB Ram

  The error message means that you have an IO error. Make sure the DVD ha without scratches and check that the DVD player is ok. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Adobe Creative Suite 201 error code?

  I have an iMac. I had to reinstall the adobe package. After the uninstall, it was impossible to install. All tests have not give error code 201.

  That's what I did:

  1) has created a new user to install it.

  (2) Firewall checked (it has been disabled).

  (3) searched and deleted all folders & files relating to Adobe.

  In another mac with the same configuration worked.

  What I would like is to get the offline installation program to install it.

  IDK I could do on the other.

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

  201 - https://forums.adobe.com/thread/1636199

  - https://forums.adobe.com/thread/1863066

• Licensing for my Photoshop stopped working ~ error code is 150:30.

  Hello!

  I use an IMAC OS X Yosemite 10.10.5 w.

  Licensing for my Photoshop stopped working suddenly ~ the error code is 150:30.  I restarted the program & the computer several times, without making a difference.

  My business is at a standstill without Photoshop!

  Can anyone help?

  Thank you - Pam

  If you are confident with the help of Terminal Server, this screenshot guide will help you to fix it on the spot.  https://forums.Adobe.com/thread/1714695

  First Post #11. If you look at the instructions and they are clear enough to you, you can try that.

  Otherwise, the problem will be solved a reinstall, but you will need to submit a new application your updates.

  Gene