Driver USB 2.0 camera built-in a yellow "!" on this subject

Similar Questions

• Need driver USB 3.0 for my Satellite L755-1J9

  I'm from the Spain and after doing format C: in my Satellite L755-1J9, I can't install the driver USB 3.0 instead of Toshiba drivers download in this Web page.

  Someone who has this driver can help me please?

  Hi Enrique

  According to the specifications of the computer laptop your machine was shipped with preinstalled Windows 7 64 bit and this original recovery image contains all the necessary drivers, including the driver of USB 3.0.

  The question is: what did you do exactly? Did you install original version of the OS that you got with your machine or clean version of Windows and which one.
  If you're still using Win7 64 bit driver for USB 3.0 you can find here.

• Satellite U300 - 13K usb 2.0 camera Chicony driver will not install on vista 32

  My Toshiba satellite u300 - 13 k has windows vista Home premium 32-bit. I can't install * driver chicony usb 2.0 camera is not install *. I get the error "Windows has encountered a problem installing the software driver for your device." Required section was not found in the INF.* Please help...

  Hello

  Hmm never saw this error message during the installation of the webcam driver.
  Have you downloaded the package again and you uncompress it before installing?

  Please also check out webcam software other models of laptops as Satellite U400

• After installing the card 3G Chicony USB 2.0 camera disappeared

  Hello

  After I instaled my connection 'Huawei technologies' Vodafone Internet box I lost the opportunity to begin my "Chicony USB 2.0 Camera". Pilots have "disappeared."
  Even if I try to reinstall 'WEBCAM Driver' of toshiba I could not start the camera.

  Do you need help?

  Thank you

  Hello

  First of all I would like to know what cell phone you have.

  On the other hand; you talk about the internal web cam which has been provided together with for example a laptop Satellite A200?

  I found some discussion of internal issues of webcam forum.

  This thread describes a solution how to start the Chicony webcam after upgrade to Vista.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169

  and this thread describes how to start webcam software!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24161

• Re: Satellite L505-13W - black screen on the camera built-in

  Guys, pls help me to fix my camera built-in.

  My webcam screen turn to black. don't know why? his work, but I don't see anything...
  I have already installed the driver, there need, but nothings happened. Before that it works well but when I reformat, I do not know now. My unit is Satellite L505-13W and my integrated camera model: USB2.0 UVC webcam...

  Please help me. Thank you!

  Hi val_mactal214,

  Maybe this article can help you:
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

• How to disable the blue light on Chicony USB 2.0 Camera?

  Hello

  My first post. I have Toshiba laptop with end of Chicony USB 2.0 Camera camera built-in, there a blue light. I put t want this blue light when I open the messenger or ICQ and talking with one my girlfriend. The blue light is turn on and I don t like it.

  How to disable, because it dazzle me
  End thank you cordially

  As far as I know the blue light can t be disabled and it will show if the webcam is used.
  If you use a Messenger you use the webcam too?

  Normally if you write only with one person in the blue Messenger is not light. On my Satellite L300, I also use ICQ, but I don't see the blue light that if I use the webcam.

• Driver for mini digital camera

  the system came with my digital camera requirements are win98/ME/2000/XP and my photos will not download to your device. I am running windows vista I have to install another driver

  If the camera mftr. does not have a Vista driver (and Yes, you would need to go to the camera mftr. site to find this driver) then just buy a USB card reader. Take the memory card from your camera out of it, insert it into the USB card reader that will be attached to the computer. Then you will be able to get your photos off the coast of the memory card from the camera into the computer. MS - MVP - Elephant Boy computers - don't panic!

• Cameras built on 1000 ElitePad G2 not detected by Windows 8.1

  If I open the camera on Windows 8.1 app, it says "to begin with, connect a camera."

  So, to check that it wasn't just a problem with the camera application, I installed Skype and tested the video. Under Options of-> video in Skype, there is no camera detected.

  After that, I thought it was a problem with the drivers, so I went here: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6629140&swLangOid=8&swEnvOid=4158 and installed the "facility management - Driver Pack (1)" for the G2 HP ElitePad 1000.  Restart the computer and no change.

  So I watched a few troubleshooting discussions and tutorials and further suggested to look at "Imaging device" in Device Manager, but in my device manager, it is not any option of imaging device.

  I looked towards the top and the consensus was if it was not available, go to Universal Serial Bus controllers and check option it for webcam drivers that need to be updated. In this category, I have "Generic hub USB", "Intel (r) USB 3.0 eXtensible Host Controller" and "' hub USB root (xHCl), nothing for the cameras.

  So I found this tutorial: http://support.hp.com/ca-en/document/c03430151 and he says: If "If there is no imaging devices category listed, select Action, and then Scan for hardware changes.", so I did, and nothing has changed.

  Can anyone suggest a solution?

  I would try adding material legacy and give it manually the pilot for the cameras, but I can't find them. By default it provides only the drivers for Dell, Kyocera, Lexmark, Xerox. Where can I get drivers for cameras imaging devices specifically for the tablet of ElitePad 1000 G2?

  CClay.

  Have you tried this one.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7468176&swItemId=ob_130068_1&swEnvOid=4158

  REO

• Download USB key or camera.

  Why can't I download images from my camera or USB key.  Never had a problem until lately.  It "is like the port is dead and does not recognize anything.

  Hi GlendaFerguson,

  1. have you tried to use the USB key or camera on a different usb port and in another computer?

  2. what happens when you use other usb on the same USB devices?

  3. you receive an error message/code?

  4. What is the number of brand and model of the computer?

  This problem can be caused if the USB is corrupted or Windows cannot find the necessary drivers for the device. I suggest you to refer to the methods and check if it helps.

  Method 1:

  Run the hardware troubleshooting tool. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, type Device Manager in the start search box and press ENTER.

  (b) expand Bus USB controllers.

  (c) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (d) restart the computer to reinstall the USB controllers automatically.

  (e) connect the removable USB storage device or camera and perform a test to ensure that the problem is solved.

  Method 3:

  If the problem persists, see the article help.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  See the following Help article and check if it helps.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  (Also applies to Windows 7)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• External hard drive USB on Time Capsule

  Hello

  I have an external USB hard disk and plug it into the USB port of my Airport Time Capsule makes it accessible wireless (if on the sidebar of the window under the section 'sharing' I click on the Time Capsule to enter airport name next to his record 'data', I also have a folder with the name of my USB HD and I can access).

  Now the problem. I have a USB external hard drive, I can access normally connect my iMac or iBook portUSB one, but, if connected to the time Capsule... nothing happens.

  So there must be a difference in the two external hard drive. What a difference creates the problem, why and what I can do is my question.

  Can someone help me?

  So far, here is what I found to be the similarities and differences:

  The two serial ATA, 2 to, partition GUID mapped external USB hard drive.

  In disk utility, one that is visible on the Time Capsule is displayed as 'external HARD disk support' physical disk with OS X extended physical volume. One who isn't appears as physical disk 'external media' with logic extended OS X volume.

  TX

  Hi Ranmaboy,

  I understand you have two external hard drives USB that you want to connect to your airport Time Capsule via USB, but one who is not recognized by the Capsule from the airport. Given that this player connects to your iMac without problem, I would recommend that you backup all data stored on the disk, and then follow the steps here to re - format the drive using disk utility:

  Backup disks, you can use with Time Machine - Apple Support

  Format a drive connected to an AirPort Extreme 802.11ac or Time Capsule

  If you are using an AirPort Extreme 802.11ac or Time Capsule, you can connect an external drive to the USB port on these devices for use with Time Machine. Follow these steps to reformat the hard disk in the first place, it is ready for use.

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  Once the disk has been reformatted, try to connect this back to the airport Time Capsule to see if it is now recognized.

  Have a great rest of your day!

• New driver USB on my laptop Portege of loading

  I have problems with a site I subscribe to who went through an upgrade.

  The website said that the problems were because he was a blocker adware on the cell, preventing the load correctly the site.

  I deleted all suspicious looking for programs, and although the site now works perfectly when I go to eject a USB device instead of seeing the listed devices I see...

  To work around this, I tried to reload the driver USB from Toshiba, but I get the following message:

  A later version of Renesas Electronics USB 3.0 host controller driver is already installed on the machine.
  The implementation cannot continue.

  I need to remove the driver completely then re - install?

  > when I go to eject a USB device instead of seeing the devices listed, I see...

  I'm afraid that your message isn't clear enough of m.
  What problems do you have exactly with USB ports?
  You can use all the USB devices connected to USB ports?

  What Portege laptop and how Windows system you have exactly?

  The USB driver that you found seems to be already installed on your laptop and the new facility isn't necessary.

  However, please answer my questions above for more information on the issue.

• Mini Toshiba external driver.usb 2.0

  I bought a mini PC 7 android.
  I also bought a mini external pilot, when I put the USB in the mini PC
  It connects fine to the TI says it is u-disc. It's a (mini Toshiba external driver.usb 2.0)
  I put a few pictures to test, but he says always the same.
  in the settings it says (not available)
  could you please help me
  Thank you

  system: mini PC 7 android
  version 2.2
  kernel version 2.6.32.9 - default
  build number froyo generic - Eng2.2 ver1.5.5 - 20110920.103830

  Hello

  Do you have the same connection error an another USB 2.0 external HARD drive or a USB flash memory stick this laptop?
  Test this
  Maybe this problem of HARD drive.

  USB 2.0 provides a power of 500 my if an external USB HDD or USB device needs more power, a problem may appear.
  In such cases its recommended to connect a USB hub with an external power supply between the laptop and the USB device

• Need driver USB high speed for Satellite Pro A10

  I currently have a conflict with the USB port of my laptop da. When I plug a USB device, I get the message that no USB high speed drivers not installed. I had a quick glance in the section download under USB for Satellite Pro A10.

  Please advise where this driver could be found.

  Hello

  What operating system is preinstalled on your laptop? I assume that the Os is not preinstalled with original recovery image. Can you give us more information on this subject?

• problem with driver usb controller pavilion g7

  I need driver usb controller pavilion laptop g7

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

  Hello:

  You must install the AMD chipset driver and reboot.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Satellite P300 - need help for a Chicony USB 2.0 camera

  Hey there I am looking for the drivers for chicony USB 2.0 camera.

  I downloaded the software called Camera Assistant Software and I also downloaded the drivers from
  HERE

  But it doesn't help out me...
  did someone helpme to contact me or send me an email [email protected]?
  I'm really very grateful to her for helping me.

  Thank you.

  Hello

  You must indicate what your problem with the camera.
  You get an error message?
  You can see a picture?

  Then please add this information.

  Welcome them