Driver USB Hub controller 3.0 gets crazy Latitude E6330

Similar Questions

• Windows does not start correctly when some multiple connection for external hard drive USB hubs are connected

  When starting, I have 2 USB hubs that connect to multiple external HD.

  If I disconnect the hubs, windows always starts very well.

  If I connect the HUB, windows delayed considerably the boot (approximately 5 to 10 minutes) and sometimes restarts the PC before getting to the screen of windows login, and after that the Windows logo is displayed during the start-up phase.

  Some HD sometimes take to start I hear but why Windows is restarted and all simply just do not excluding the HD or hubs does not not as expected?

  Any clue?

  Hello Patrick,.

  If other devices are working well, then clearly the USB ports have gone very well. I would say more that likely you have two defective USB Hub (it happens, I have several other defective in my junk mail boxes!).

  Given that the hubs are relatively expensive, I suggest you replace the two hubs with more heavy duty those able to withstand the high external HARD disk requirements. Try Newegg.com and TigerDirect.com, sort by best rating.

  The other thing, you don't mention if your hubs / ports are ports USB 3.0 and if you use a card like the adapter link. These configurations can sometimes cause problems, and it might be useful to re - check the different connections.

  Keep me posted.

  And thanks a lot for this.

  Kind regards

  BearPup

• TouchSmart tm2 the usb hub controller are not not in Device Manager

  I have a Touchsmart tm2. Device Manager not tilts my USB Controller. There is a list with the yellow flag "unknown device". I tried to uninstall and restart. Problem persists. Therefore, none of my USB ports work. This issue coincides with the arival of the malware "mysearchdial" who took my browsers. My laptop is running Windows 64-bit edition, prepared of 12 GB of RAM.

  Thanks again. I have at least the link to Microsoft Essentials.

  I did use True Image Home to restore my OS on a previous image drive, October 2011. I had tried several times until I realized that I needed to be connected directly via ethernet and not wireless.

  It took an eternity o all updates, but now my Touchsmart is as good as ever.

  Thanks again for your response.

• Tecra A11-126-USB-Serial Controller driver with Docking Station

  When we run a new install with Win 7 (64-bit), Device Manager marks as missing driver USB-Serial controller. I need this driver not not not for installation from (msi file) device manager - not an additional tool (exe file).

  Where can I get it?

  Post edited by: PWTosh

  I put t know what you mean with exe or msi, but have you installed the chipset utility?

• New driver USB on my laptop Portege of loading

  I have problems with a site I subscribe to who went through an upgrade.

  The website said that the problems were because he was a blocker adware on the cell, preventing the load correctly the site.

  I deleted all suspicious looking for programs, and although the site now works perfectly when I go to eject a USB device instead of seeing the listed devices I see...

  To work around this, I tried to reload the driver USB from Toshiba, but I get the following message:

  A later version of Renesas Electronics USB 3.0 host controller driver is already installed on the machine.
  The implementation cannot continue.

  I need to remove the driver completely then re - install?

  > when I go to eject a USB device instead of seeing the devices listed, I see...

  I'm afraid that your message isn't clear enough of m.
  What problems do you have exactly with USB ports?
  You can use all the USB devices connected to USB ports?

  What Portege laptop and how Windows system you have exactly?

  The USB driver that you found seems to be already installed on your laptop and the new facility isn't necessary.

  However, please answer my questions above for more information on the issue.

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• FAILURE of STATE DRIVER / USB - IF xHCI USB HOST CONTROLLER

  My ASUS Zenbook UX32VD takes 10 or more minutes to start and just to display a blue screen with the text of "an error occurred...". DRIVER_POWER_STATE_FAILURE.
  The tha solutions technical support gave me did not work
  (Restart the factory system and lose all my programs... ¬ twice)

  After travel a lot, I found a video (youtube. com/watch? v = QYY2IHpI8Ow), the guy says, the problem is caused by the driver of a device

  But the driver that represents a yellow mark is of the WiUSB from Intel, USB - IF USB HOST CONTROLLER xHCI (I Don t know what - this, sorry for my ignorance, but I just know I do not have any device USB D :))
  I tried to update automatically, but just what the latest version shows...

  I don't know what to do, I've tried everything!

  (Sorry for my English)

  Hello

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8).
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if you make them available at the SkyDrive or other
  file -sharing sites (such as MediaFire). If you have problems downloading the minidumps
  Copy it to the desktop or Documents folder and download them from there. (This is
  Likely NOT of great help on new construction).

  ZIP or download the content of the C:\Windows\minidump (only once you have made
  suggestions initials at the top of this answer and IF the BSOD problems).

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7 and 8)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ==========================================================

  This "might" be a power problem, even if it's not the most common cause.

  9F is probably a driver issue. Antivirus/antispyware/security programs can also cause these problems.
  Have you added the recent devices or the updated drivers - do not forget to check in Windows updates of
  see if a driver has been updated before that happens. This can also be caused by a loose card
  or cable and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel-
  Device to be sure management of great drivers are stopped not for sleep - double-click on display
  Adapter - card NETWORK and WIFI - healthy and others - tab power management - uncheck allow
  computer to power off. Maybe the only has a problem.

  (Use EXECUTION instead of start - search such as used on Vista or Windows 7)

  WINDOWS key + X - RUN - type MSCONFIG.exe

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See link to the troubleshooting tool
  above my generic driver update methods.

  Bug Check 0x9F: DRIVER_POWER_STATE_FAILURE<-- read="" this="">
  http://msdn.Microsoft.com/en-us/library/ff559329 (v = vs. 85) .aspx

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ------------------------------------------------------------

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7 (and Windows 8).
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  --------------------------------------------------------------------------------------------------------------------

  It's my generic how updates of appropriate driver: (update of your key drivers and BIOS)

  This utility, it is easy see which versions are loaded: (VIEW of the value for hide Microsoft drivers
  (-update those without drain in their names.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Drive external hard connected via USB hub: icons not showing on desktop

  Hi... on an iMac 2015, using a USB hub 3.0 occasionally to connect an external hard drive (which stores these things as art assets)... but the external hard drive icon does not appear on the desktop... it IS in the sidebar of Finder, though...

  But on the icon the Finder sidebar, the small icon "eject" gray is missing, and the only way to eject is to right click and select "eject" or use the eject button in the Finder toolbar... it's okay...

  But is there a way to display the icon on the desktop, so I can always remember to eject the disks attached?

  (the desktop icon shows normally when connected directly via the USB ports at the rear)

  Thank you.

  Finder-> Preferences-> general, check the appropriate boxes under "show these items on the desktop".

  [My personal choice is them having all checked]

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• problem with driver usb controller pavilion g7

  I need driver usb controller pavilion laptop g7

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE & 1 & 80

  PCI\VEN_184B103C & REV_03\3 & 2411E6FE, 1 & 81

  Hello:

  You must install the AMD chipset driver and reboot.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Satellite 5005-S504 need generic USB hub driver

  Hello

  I'm looking for the driver for the USB devide with the following details:
  * ' USB Device '.
  * VID (Vendor ID) 0930 (== TOshiba)
  * Product ID = 0400

  I am running windows XP. While trying to install a printer, I had to update the usb driver, which has caused all my usb ports stop working. After that, I uninstalled the USB drivers for windows to reinstall uppon reboot, but it did not. As a result, none of my USB ports are currently working, and I have a USB device not recognized in Device Manager

  A friend with the same PC has identified this device as "USB hub" generic "on his PC. Where and how to find the driver?

  Thank you
  Franck

  Hello

  For the use of the USB ports on your machine that you n t need any special drivers and you won't find anything on the Toshiba download page. After the installation of Windows XP Home edition, the ports are recognized correctly.

  I really put t know which driver you are trying to configure but usually the driver must be installed to the device, and not for existing USB ports. As far as I know, this unit has USB 2.0 and there should not be any problem.

  Also check The PRESENT DOCUMENT
  Maybe the help!

  Good luck!

• Pavilion dv6-6b6sa: universal bus controller driver (usb)

  Please can you help me with the driver for universal bus (usb) for my laptop controller

  Hello:

  You need this driver...

  This package provides the driver for host controller NEC Electronics USB 3.0 for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp54479.exe

• Satellite L30 - required USB serial controller driver

  Hello everyone,

  I can't find the driver for USB-serial controller C for my Satellite L30.
  Needs in order to connect my Samsung mobile.

  Thanks in advance,

  Jacob

  To be honest I had never heard about USB-Serial Controller C.

  The windows operating system contains drivers own controllers USB (USB port).
  This means that you will not find any special drivers for USB controller.

  If you have some connection with the cellphone problems then I recommend to install the software that was supplied with the mobile phone. There is always a CD with the software.
  Before installing this software, you must uninstall the previous software.

  By the way; You can delete the C USB-serial controller in Device Manager and reboot the laptop. Then check if the windows will recognize this controller again.

• USB Serial Controller driver for ProBook 4530 s

  Hello world

  I need driver for USB Serial Controller for ProBook 4530 s. I him have not found anywhere.

  Thanks in advance

  DOOH!  Found.  Checking validity of fingerprints.  I have looked for the id and got HP toot sweet response.

  Are ' thank you all for your kind cooperation.

  da signing.