Drivers DVD Roxio or Corel

Similar Questions

• AVCHD DVD produced in Corel Video studio don't play in windows media player, what codec do I need, where can I find and how is it installed?

  original title: DVD AVCHD plays not

  AVCHD DVD produced in Corel Video studio does not play in windows media player.

  what codec do I need, where can I find and how is it installed?

  AVCHD DVD discs require the ability to analyze the h.264 in a transport stream. In most cases, you need to install Cyberlink PowerDVD in order to get this feature. Here is some additional info on Cyberlink PowerDVD. Depending on how you the author of the disk, it may be that the disc will only playback in a Blu - ray player not on a standard DVD player.

• I can't put the drivers for roxio gamecap

  I can't put the drivers for roxio gamecap

  Your question is too terse and contains too little information for anyone to
  help you.  Read this article and try again:

  http://support.Microsoft.com/kb/555375

• Cannot read Blu - ray discs using a DVD Toshiba or Corel WinDVD player

  We just bought a blu - ray disc and tried to play on the laptop with two programs that have been pre-installed on the computer.

  Drive DVD Toshiba says "this player does not support playback of the DVD" O.o

  And Corel WinDVD says "WinDVD information service is not yet ready. "Please try again later".

  I've updated the Win DVD player and he always made the same mistake.

  Drive works in our other blu - ray player.

  How can I fix?

  Can you please tell us which model of laptop you have exactly (the complete model name)?

• Using recovery Toshiba and Applications / drivers DVD Tecra M2 series

  Hi all, I have a problem to format my laptop Tecra M2. When the installation starts, you will see an error at the Command prompt. the error indicates
  Failed installation aborted/a process!
  A:\ >
  Please help me how to fix it

  Can you please explain what you do exactly?
  Do you use the Toshiba Recovery CD facilities to install the OS?
  Please describe what exactly happens when you start recovery image.

  Applications/drivers CD/DVD, you can use if you have installed the OS using the facilities of Microsoft CD.

• Where can I find drivers DVD - RW TDK 420N

  Where can I find TDK DVD - RW 420n drivers or Firmware download

  Hello
   
  I would say please contact TDK support site and check the availability of drivers for DVD RW 420n.
   
  http://www.TDK.com/contact.php

• Re: Drive drivers DVD TS-L632D necessary for Satellite P205-S7436 Vista

  Hi, I have a machine running vista home 32-bit P205D-S7436. The dvd drive appears in the material under system settings and says that there is a driver problem
  following error message.

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Any ideas people?

  See you soon
  Iain

  Hi mate,

  I have an idea:

  check this Microsoft Knowledgebase document-> http://support.microsoft.com/?scid=kb%3Ben-us%3B314060&x=6&y=13

  Your problem should be solved after you apply this workaround solution...

  Welcome them

• Problem installing Windows 7: drivers needed

  I try to perform a clean installation of Windows 7 on a 250 GB hard drive which is perfectly clean. Windows asks a driver for my ASUS DRW-2014L1T optical drive before it can proceed with the installation. The ASUS site offers only a few firmware for this model, and none of them are same for Windows 7 (vista is the more recent they are). In addition, the firmware are in .exe format which makes me think they are intended to be installed on a machine with Windows already installed. So, do you know of any ways to get around this problem? Is there generic drivers that I could install?

  Thanks for any help,

  Nate

  Hey Nate,

  ·         How many drivers DVD the computer have?

  ·         Is ASUS DRW-2014L1T internal or external drive?

  If the computer has an another DVD player, I suggest to use the DVD player and try to install Windows 7.

  For reference:

  DRW-2014L1T has no drivers for Windows 7

  http://www.ASUS.com/Optical_Storage/Internal_DVD_Drive/DRW2014L1T/#download

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  You can also contact the manufacturer for more help and information.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

• Downgraded to XP: now cannot read DVDs (not installed dvd decoder) for dv2000 CTO

  I just installed a new hard drive and Windows XP Professional 64-bit. My computer is a laptop Pavillion dv2000 CTO. Product # is RU769UA. After installing the new OS (it was originally installed with vista home), I found that my sound does not work. I tried to install all or most of the drivers for my model, some who have been for vista has failed. AFAIK, the drivers that worked was installing (sound)... but I'm not entirely sure. I am empty and could really use some help with this. It's my last problem with this computer. >.

  Edit: And I just realized that I can't play DVDs without having this error message - "Windows media player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  Message edited by Azu on 30/04/2009 14:45
  Edit2: I have finally the wireless connection works! Now, I just need to understand the sound. It does not record the sound devices!
  Message edited by Azu on 30/04/2009 15:57
  Message edited by Azu on 01/05/2009 13:20
  Message edited by Azu on 01/05/2009 13:21

  Thanks its working now!

  But I still have problems with DVD playback... I am out of the dvd decoder and can not find the download for just a dvd decoder. I downloaded a few media players but all still not allow me to read the actual DVD disc. I've already spent too much money on this computer and I really can't afford to buy any additional software. Is it possible for me to find the decoder correct drivers/dvd for free?

• Error Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Cannot read CD/DVD

  Original title: Acer laptop DVD drive missing

  Hello

  I have an Acer Aspire 5740 G computer laptop running Windows 7. When I tried to play a movie today, it did not work. The green light on the drive of CD flashed several times then stopped and all was silent. I opened my computer and saw that the CD/DVD drive wasn't listening it. I then opened by Device Manager and the two things under CD-ROM/DVD-ROM readers had a yellow triangle and an exclamation point on them.
  One thing has been called; SVI 2ZGTAB8HQ7G5 SCSI CdRom Device
  The other thing was called; TSST Corp CDDVDW TS-L633C
  I clicked on both and saw the message; "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  The last time I used the CD player a burn a disc over a month. I used Microsoft Fix It but it says to remove the drive and plug it in somewhere else, and I can't really do this because it's the only drive on the laptop and I'm worried I might break if I go out there with force. Can someone help me? I would really appreciate it.

  Hello

  1. what Microsoft FIXIT did you use exactly?

  2 did you a recent software or changes to the material on the computer?

  I suggest you try the steps mentioned below.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you run the FIXIT from the link below and.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  You can run the FIXIT or you can try the manual steps and check.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 4:

  Re-install the drivers DVD

  Completely uninstall the DVD drivers from Device Manager, and then install the latest drivers for your computer.

  Open the Device Manager.

  Once the drivers are completely uninstalled, download the latest drivers from the manufacturer of the computer.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=1878

  Hope this helps and keep us posted.

• EliteBook 8440p: reinstall applications preinstalled after upgrade

  I had all these applications pre-installed, as the DVD Roxio Creator (not sure if it's real name) and after the upgrade to Windows 10, all of these applications have disappeared. How to make a comeback?

  MrConorAE

  Hello;
  
  Let me welcome you on the HP forums!
  
  I wish I had some good news for you, but I did not...

  These applications were for Windows 7 and they were not carried over during the Upgade because they operate not on Windows 10 - and, because your PC did not come with preinstalled Win10, HP provides no drivers or applications for Win10 for your PC.

  Here is the link to the page for Win7 drivers:

  You can choose the version of the OS you're using be, download apps and see if they will install, but they probably won't: http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=4095874 & swLangOid = 8 & swEnvOid = 4059

  Good luck

• Cannot completely remove progams with Add/Remove programs

  I have programs that do not work correctly, for example Windows Media Player because of the missing codecs / etc. So movies purchased from Roxio - DVD player now Corel, it will not be installed because of previously installed older version of the same program, WHO DO WILL NOT UNINSTALL FROM MY XP PRO COMPUTER,

  There are other programs that will uninstall not either - because of "missing files" - any suggestions? Other that throw my computer out the window >
  I can be contacted * address email is removed from the privacy *.

  I have programs that do not work correctly, for example Windows Media Player because of the missing codecs / etc. So movies purchased from Roxio - DVD player now Corel, it will not be installed because of previously installed older version of the same program, WHO DO WILL NOT UNINSTALL FROM MY XP PRO COMPUTER,

  There are other programs that will uninstall not either - because of "missing files" - any suggestions? Other that throw my computer out the window >
  I can be contacted * address email is removed from the privacy *.

  Yes - the uninstall process is controlled by the ininstaller provided with the third party program.  Windows doesn't do anything for you.  It simply allows third-party vendors use the register and place their uninstall information in such a place you see in Add / Remove programs to call their uninstall program.

  Use Revo Uninstaller.  Use the trial of the PRO version and make the most aggressive/careful option.

• Error, "the program"Importer.exe"stopped" when importing a video.

  Hi all.

  First of all, I'm sorry to bother you with one issue other than Microsoft, but it is a place where Microsoft Support advised me to ask for help. And in fact you are my last hope :)

  The thing is this. I use Pinnacle Studio 15HD (http://www.pinnaclesys.com/) for video editing. And normally, the first thing you can do to start working is importing the video source (be it a camera or any other device that contains media). Suddenly, the Studio began to show a message "the program has stopped"Importer.exe". " Windows is looking for solutions to this problem"(Windows 7 Professional). This message appears when you switch to the Import tab and sometimes just after the loading of the Studio. In any case the Studio stops working and does not at all after that message.

  I already tried the following to resolve the problem:

  -Reboot / restart the operating system

  -Completely reinstall the software (Pinnacle Studio) - twice

  -Graphics card drivers / DVD - ROM (suggested by users of the pinnacle forum)

  -Complete the process of importer.exe and launch again in 'Run' option... » (-/ /-)

  -Unplug all the devices of media before starting the Studio

  No results :(

  If despite that Importer.exe is the a program linked to the Studio, as far as I understand the problem is not inside the Studio. If you have any ideas on what could lead to such a question, I would be very grateful.

  Pinnacle is now a part of Corel Corporation and unfortunately, they argue that the version 16 and higher product :(

  Thank you very much beforehand.

  Tamara & Leonid.

  You can post here as well.

  http://forums.pinnaclesys.com/forums/70/ShowForum.aspx

• Portege M200 does not start

  I have a Toshiba Portege M200 with Microsoft Windows XP Tablet Edition. When I turn on the computer, I get the following message is displayed:

  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit Intel Boot Agent
  Insert system disk in drive.
  Press a key when you are ready.

  When I insert the recovery and Applications/drivers DVD Portege M200 Series, the same message will reappear.

  What is my next step?

  Thank you.

  This message appears only if the safe portable couldn t of the other sources and tries to boot from LAN.

  The question is; Why the Portege M200 doesn't boot from the HARD drive?
  In my opinion, there are two possibilities; There is no OS on the HARD drive or the HARD drive died.

  I think that this should be checked first

• Satellite L755D-S5204 dead after the fresh install of Win XP

  Regarding this Toshiba lab Top I bought the last weak.
  Model: Satellite * L755D-S5204 *, I had to install a new system (Windows XP 32-bit SP3)

  But there is a major problem; who is that definitions of drivers that DVD was not included with the lab on it and my Lab Top is currently dead.

  I'd be grateful if you provide me with a download link for the drivers DvD definitions.

  Can you please be more specific?
  What you're looking for?
  Do you need drivers Win XP or what?

  The Satellite L755D-S5204 seems WE notebook series and Win XP drivers are not available for this new series.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp