HttpConnection MDS Service not available

Similar Questions

• Browser blackBerry Smartphones error message: u23 MDS Service not available

  Hi all!

  I have a problem that is driving me crazy.  The facts:

  I have a BB 9780 working with my companies BES which shows this message. Imposible to get any URL with it. Another application that requires this type of access cards does not either, even if the GPS can give propper place. It seems then must be associated browser.

  E-mail works perfectly.

  Another BB [8910] have no problem in my BES. Just this one.

  Already wiped and reactiveated... nothing changes.

  Any idea? Each of them will be welcome.

  I would ask my IT support team... but... I am the COMPUTER team

  Thank you!

  Enrique.

  It's strange - as you write you have than one 9780 device that doesn't work do not give problem MDS, and others are functioning normally. This may mean that some problem with SB.

  Possible so maybe two question here.

  1 user on BES some problem - try to re - create (as usual with the COMPUTER policy and permission restriction)

  2 problem can in device - try to wipe by BBSAK and first do "Factory reset" then "Wipe Device. then re - load a newer OS to the device. catering to the device only need information! AddBook, Messages, SMS, but no way to remove the system configuration and Options

  Maybe he is helped

  Also, I found a suggestion to re-insall Service SDM http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB25047

• UTL_MAIL works do not, but apex_mail... any ideas? (SMTP transient error: 421 Service not available)

  Start

  () UTL_MAIL. Send

  recipients = > ' [email protected] ',

                 sender       => ' [email protected] ',

  subject = > "this is an issue."

  message = > 'This is a message');

  end;

  ORA-29278: SMTP temporary error: 421 Service not available

  ORA-06512: at "SYS." UTL_MAIL", line 654

  ORA-06512: at "SYS." UTL_MAIL", line 671

  ORA-06512: at line 2

  Start

  apex_mail. Send

  (

        p_to       => ' [email protected] ',    

  p_from = > ' [email protected] ',  

  p_subj = > 'this is a topic. "

  p_body = > 'This is a message'

  );

  apex_mail.push_queue ();

  end;

  Works very well.

  (of course, I use the correct recipient/sender names).

  For what it's worth, I have a second server with the same ACL settings and utl_mail is working on that one, but I don't know what is different.

  Any help much appreciated.

  You will get an ORA-29278 if you smtp_out_server instance parameter is not assigned to a working SMTP service.

  --

  John Watson

  Oracle Certified Master s/n

• E.M.P. automate connection due to lack of EPMAT - 11:Service not available

  I'm currently trying to create some automatisms to connect and a dimension to export. My only question is based on what the EPM automate tells me that I need to settings does not work. Can anyone help?

  These are the settings he seeks and below is what I got.

  D:\Oracle\EPM Automate\bin > epmautomate login help

  Use: epmautomate login username password url identitydomain

  Parameters:

  user administrator user name to run the following commands

  password of the user

  URL Url of the server cloud environment

  Syntax: http[s]://abcd.oracle.com:1234

  identitydomain domain name of identity within the public cloud oracle s

  service

  Syntax: OxcorpProduction

  epmautomate connection [email protected] JoesPassword

  https:// company23411.PBCs.US2.oraclecloud.com company23411

  The above syntax is just returned with

  EPMAT - 11:Service not available

  Help, please.

  Yes you are right, you don't need to specify the connection method again.

  I think my encryption came out like that. You can stick and give it a try. file .prefs is created right after a successful login, since you aren't able to do I am trying to see if you can manually creating the file.

  Concerning

  Celvin Kattookaran

• Service not available error with SSAS cube

  Hello

  We have imported Microsoft Analysis Services (SSAS) by using XMLA RPD Cube.  While using the drill down one-touch in BI answers using hierarchies of presentation, OBIEE generates the following error

  
  

  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P

  Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query failed: URL: http://< Server > / < application name > / msmdpump.dll. The http return status is 503. < html > < head > < title > Service not available < / title > < / head > < body > Service not available < body / > < / html >

  However, drill down one-touch works very well with the attribute columns. Alsoit stand is works well up to certain level of zoom. In the journal, it is obvious that OBIEE generates multiple physical queries (with clause) to extract the data in the cube.

  Is there a limit on the size of the mdx or number of mdx queries that msmdpump.dll can treat?  Is there any configuration to be changed when you are working with SSAS cubes?

  Version OBIEE: 11.1.1.6.2 BP1

  Very much appreciate your time.

  The error is due to the inadequacy of the maximum number of connections in the connection pool and the MaxThreadsPerClient of XMLA parameter in analysis services.

  The default values are 10 and 4, respectively. Then adjust the number of values of connections in the connection pool and MaxThreadsPerClient of XMLA will solve the problem.

• SMTP service not available

  Hello
  
  How to send mail via the following code?
  
  CREATE OR REPLACE PROCEDURE send_mail (p_to IN VARCHAR2,
  P_FROM IN VARCHAR2,
  p_message IN VARCHAR2,
  p_smtp_host IN VARCHAR2,
  p_smtp_port in DEFAULT NUMBER 25)
  AS
  sys l_mail_conn. UTL_SMTP. Connection;
  BEGIN
  l_mail_conn: = sys. UTL_SMTP.open_connection (p_smtp_host, p_smtp_port);
  sys. UTL_SMTP. HELO (l_mail_conn, p_smtp_host);
  sys. UTL_SMTP.mail (l_mail_conn, p_from);
  sys. UTL_SMTP. RCPT (l_mail_conn, p_to);
  sys. UTL_SMTP. Data (l_mail_conn, p_message |) UTL_TCP. CRLF. UTL_TCP. CRLF);
  sys. UTL_SMTP. Quit (l_mail_conn);
  END;
  /
  
  
  BEGIN
  send_mail (p_to = > '[email protected]',)
  P_FROM = > '[email protected] ',.
  p_message = > "This is a test message."
  p_smtp_host = > 'mail.google.com');
  END;
  /
  
  
  ERROR:
  
  ORA-29278: SMTP temporary error: 421 Service not available
  ORA-06512: at "SYS." UTL_SMTP", line 20
  ORA-06512: at "SYS." UTL_SMTP", line 96
  ORA-06512: at "SYS." UTL_SMTP", line 138
  ORA-06512: at the 'APPS '. SEND_MAIL', line 9
  ORA-06512: at line 2
  
  
  Please, help me get through the error.
  
  
  Thanks in advance,
  Pradeep
  
  Published by: user11165897 on December 7, 2012 02:27

  Hello

  Here, all input values are false.

  By providing the correct host, email, port, it works fine now...

  Pradeep

• ORA-29278: SMTP temporary error: 421 Service not available

  Hello
  
  I am struck intermittently

  ORA-29278: SMTP transient error: 421 Service not available 

  on

  DB Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi

  Please let me know if additional information is required.
  
  Any ideas would be appreciated.
  
  Thank you
  CJM

  Assuming that you are still connected to the same SMTP server, this means that the SMTP server intermittently is down or inaccessible (at least on the port that you are using). Most likely, it would be a problem to address to the administrator of the mail server even if it could be an intermittent network problem.

  Justin

• How do I resolve the error "421 Service not available.

  Hello
  
  Can someone help to solve the "421 Service not available" error I tried to send emails with three different smtp servers.
  
  the error I get this error: -.
  
  ERROR on line 1:
  ORA-20000: cannot send an e-mail: ORA-29278: SMTP temporary error: 421 Service not available
  ORA-06512: at "SYS." SEND_MAIL', line 34
  ORA-06512: at line 1
  
  
  Thanks in advance
  Uttam Singh

  This problem on the SMTP server.

  You should check with the system administrator.

  Maybe your server via SMTP SSL SMTP.

  problem sending mail with UTL_SMTP (STARTTLS)?

  or try

  UTL_SMTP.command (conn, 'STARTTLS');

• print service not available el capitan

  I can't print from this computer, iMac (24-inch, mid 2007), operation 10.11.5 el Capitan and the printing software Epson for WF WF2630. When I try to open the preferences of printing system and scanner - printer indicates the possibility of set up. But when I try to set up, nothing happens. When I click on the printer icon in the dock, a message "Printing Services is not available." I have the latest version of the epson software (June 7, 2016).

  Any ideas anyone?

  Hi, take a look at this article, it may help you OS X El Capitan: Troubleshooting printing

• Could Calendar services not available after restarting LDAP problem?

  I followed the installation guide:
  
  https://wikis.Oracle.com/display/CommSuite7U2/communications+suite+on+a+single+host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
  
  I have correctly installed and configured the Server Update 2 Oracle UCS Sun7. Calendar works (if I don't reboot the server).
  
  
  However, when I reboot the server, calendar service is not available.
  
  
  Important information for when I installed Oracle UCS Dim 7 update 2 by following the installation guide:
  
  I noticed when browsing through files, there is already a folder "dsee6" for the Linux Oracle I started from. After the installation of the example for the Oracle Linux 5 with GlassFish install, I had to download a new directory server. By following the instructions on page 7 of the listed installation guide above, I did another folder "dsee7". I wonder if I would have never downloaded this new directory server by following the instructions on page 6 "obtain software". In fact, the installation guide does not mention where to find the directory server, so I went to the site of delivery and figured it out myself. in any case, in the section 'Installing and configuring directory server', #3, I was instructed to "mv dsee7/opt/sun/directory. In this folder, / opt/sun/directory/bin, there is '. '. "/ dsadmin" utility that can be run. This serves to do many things with the directory server, including start-up. This is how I started it:
  
  CD/opt/sun/directory/bin
  . / create/var/opt/sun/directory/dsins1 dsadm
  . / dsconf create suffix '0 = isp.
  
  Also, I downloaded the delivery directory server - Oracle Directory Server Enterprise Edition 11 GR 1 material Patch Set 1 for Linux x 86-64
  
  Then, I found myself running to implement:
  
  . / dsccsetup ads - create
  . / dsccsetup war-file-create
  $. / dsccsetup cocoa-reg
  . / dsccsetup State
  
  Then, it seemed that dcss agent is registered in the cocoa.
  
  So, if we pass to come to page 9 of the installation, "Preparation of the directory" guide, I ran this and prepared the directory. After installation is finished, I could restart the server directory without any problems, as long as I do not restart the machine. I would like to restart the server directory as follows:
  
  CD/opt/sun/directory/bin
  . / dsadmin stop-domain domain1
  . / dsadmin start-domain domain1
  
  However, if I rebooted the machine, I could always start and stop the server directory as shown. But the calendar Services were not available.
  
  The only reason I question this LDAP server that can be the cause of this is because at one point, I had configured the services to run at startup. I followed these instructions:
  
  https://wikis.Oracle.com/display/CommSuite7U2/start+and+stop+scripts+for+communications+suite+%28Linux%29
  
  I use a VMSphere client to host this set upwards. So, given that this point the configuration of services at startup, I rode hanging at the rear so that services are more fixed upward to run at startup. But when they were, and I restarted the machine, I could see 389 ldap errors in all directions. So, which drive me to roll my snapshot in effort to try to correct the ldap errors. I no longer get LDAP errors as I drove my instant return. But, as I said, I have no more services, including LDAP, to start Protocol started as shown in the above link that tells us how.
  
  After restarting, I run these commands to get the server up and running:
  
  Start the GlassFish server:
  CD/opt/sun/SUNWappserver/bin
  . / startserv
  
  Web start (mail server I think):
  CD/opt/sun/comms/messaging64/bin
  . / Start-msg
  
  Start LDAP (directory server)
  CD/opt/sun/directory/bin
  . / dsadm start/var/opt/sun/directory/dsins1
  
  Start Mysql
  CD/etc/init.d
  . / mysqld start
  
  All these commands complete without problem. I can connect on the web of convergence, I can hit the Managing Director, I can connect to the GlassFish administration console, and I can see my calendar folder when I hit him in the web (http://myServer.com/davserver/dav/home/userName/calendar/).
  
  So, in summary, I was wondering if anyone knows if it assumed that second directory server is causing problems since I started with Oracle Linux 5 and Oracle Linux 5 seems to have the dsee6 file already installed with it. Would be - why my calendar services do not start after reboot, but work before the reboot?
  
  
  (Also, all my messages to keep deleted.) Can someone please send me an email if someone Oracle is deleting my messages and tell me why they are removed? )
  
  Published by: ntfytim16 on March 5, 2012 07:41
  
  Some of my steps were unserviceable. Cleaned them is easier to understand.

  You stop/start the GlassFish server container:

  https://wikis.Oracle.com/display/CommSuite/Calendar+Server+7+Administration+Guide#CalendarServer7AdministrationGuide-StoppingandStartingCalendarServer

  Joe

• Service not available after a restart of the server

  Hello
  
  I have a little problem here, on my adobe connect server.
  When I restart my server adobe connect service became unavaible (failed to connect).
  After checking the breaks and services of SGF are well launched.
  
  And when I start the console on http://localhost:8510 / console service become available immediately without having to manually restart the services.
  
  Does anyone have any idea on this?
  
  Windows 2003 R2 Standard SP2
  Acrobat Connect Pro SP3 company 6.3,40
  SQL Server 2005 SP2

  OK, I think I solved my problem!

  In fact my Acrobat Connect Pro server is a Proliant DL380 G2, so a little slot size for Adobe Acrobat Connect Pro.
  From the beginning of server, windows cannot mount the MSSQLSERVER service fast enough to meet the adobe connect request.
  This leads to an error in authentication since the database is not mounted, Connect, then refused to respond to web requests.

  I have created dependencies between services to resolve this issue.

  I created a REG_MULTI_SZ in the registry.
  Key name: DependOnService
  Value: MSSQLSERVER

  in

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BreezeApp
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FMS
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FMSAdmin

  It seems to work, I try 4-5 restarts and the adobe connect service if available immediately, without the console from the beginning thing.

  Thx for the help.

• Weather Windows 7 gadget rpet "Service not available in your area.

  Hello everyone

  Whenever I have add the weather gadget on my desk he repeats to me is not available in my area. This gadget worked perfectly on my previous installations of Windows, but for some reason any, that he refuses to work now. Any advice or tips?

  I'm located in the Canada

  Thank you all in advance

  Go to Control Panel > region and language > location and make sure it has correct information.  Right click on the weather gadget, click Options , and do the same thing.

• Missing measures of server Java and GC service not available

  Hello
  
  I'm new to the custom plugin. So I'm following JMX Plugin tutorial (http://support.hyperic.com/display/DOC/JMX+Plugin+Tutorial) to create a plugin that is customized for a simple Java process. I use the plugin displayed in the tutorial link XML.
  
  The problem is that I could use the command line (java-jar < Agent Directory > /pdk/lib/hq-product.jar-Dplugins.include=yourPluginName m discover - a metric) for all measures. I have attached the results of the command line.
  
  However, on server HQ (localhost:7080), the availability, the use of the Cpu process, processes resident memory size are taken. And the GC services are auto-decouvert, but they appear as unavailable. I enclose two screenshots of the HQ server.
  
  Please help what I missed. It is very important for us to evaluate product Hyperic. Thank you very much.

  It seems that the metric collection is not enable for the rest of the metric.

  Check the default trace on the administration tab. And where each resource collection of parameter can be set by changing the metric models. I hope it's as simple as that...

  Naturally all parameters are not enabled by default.

• Drivers for Extensa 4420 - service not available?

  Hi people,

  I've updated a laptop Acer Extensa 4420 of Vista to Windows 7.  I tried for over a week to download drivers Windows 7 x 64 for this PC, but whenever I select Windows 7 x 64 I get this message: "Service unavailable".

  For most of my attempts, the page would default to display the Windows Vista x 86 drivers.  Today, he is unable to do it again.

  I called Acer technical support and provided my SNID.  This PC is out of warranty, if Acer will not take my call.  Their automated system routed me to a third party.  When I explained the scenario, the agent told me the server is under maintenance and I should try again in a few hours.  When I said that I had tried for days, he suggested that I call Acer.  He gave me the same number I had called to him.

  This seems to be a recurring problem with a lot of messages on the same subject.  User Laurent_14 wrote that the Australian site was working.  As of today, it is not.

  I've seen users suggest clearing cache Java or temporary Internet files.  In fact, I tried to download the drivers on the newly installed Windows 7 x 64, before visiting other websites or install any other software.

  How do I get the drivers for an older Acer?

  Thank you

  Bill

  Hi all

  I checked yesterday and today, I was able to pull up of drivers on both models. The problem was reported last week and we will continue to monitor our downloads section.

  Cory

• BlackBerry Z10 Blackberry Protect service not available

  After upgrade to 10.1.0.4181, Blackberry Protect service is not running and the error "Unable to connect to the Service Blackberry Protect" appears.

  Help, please.

  Thank you

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should translate a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait message "registration" happen

  2) restart

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • Peripheral BB10. Hold the top button until the counter reaches zero. Wait for the unit to be completely stopped (for example, nothing appears on the screen, no lights, etc.). Hold the top button until the red light. Wait through the entire boot process. IF this fails, you can try the method of battery-pull above, but it is normally NOT recommended unless nothing else works.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

  Good luck!