Drivers XP DV9210us "base system".
I had to downgrade to XP on a DV9210us because Vista and the recovery section, have become corrupt.
I all but 3 devices work and they are just labeled as "Core system" devices and can not find a solution.
Any help will be greatly appreciated.
Jake
Hi, Jake: Try to install the drivers for your player card from the link below: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3204945&swItem=ob-57868-1&mode=3 Paul
Tags: Notebooks
Similar Questions
-
Equium A210: Drivers XP for base system device, modem
I need to find drivers for base system device?
What is c?Need drivers for the modem device and bus audio high defination.
Can someone help me?Hi mate,
Just a quick question: have you already checked the drivers Toshiba and Downloadsite?
I found all the drivers you need then please check the following site and choose / Download your drivers:http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Welcome them
-
dv6968ca - installed Win7, missing drivers for 2 "Base system devices.
I run Windows 7 upgrade advisor with no problems noted.
Install Windows 7 Pro (required a clean installation rather than an upgrade).
When I look in Device Manager, there are two elements by symbols. Both are called "Base system device". The only identification information I can find are the location: 9 PCI bus, device 9, function 2 and the second is bus PCI 9, device 9, function 2. It is said that the drivers are not installed (Code 28)
I tried to update the driver, but nothing was found. What devices are and how can I solve this problem?
Hello
Check this thread:
Upgrade of Windows7 for dv6000/dv9000 models guide.
Install Ricoh card reader driver here.
-
W520 - Base system device driver does not
Greetings.
This morning at the start of my ThinkPad W520, the player no longer works. A glance in the (Windows 7, 64-bit) Device Manager shows the 'Base system device' and points out that "the drivers for this device are not installed." Trying to get Windows Installer natively drivers does not work. Some googling shows others with similar problems in the past; recommendations include installing a card reader driver Ricoh for Windows XP or Vista; It did not work. Other drivers available include 8ass82ww.exe and 8axv51ww.exe - these don't work. Installation of the own Support Center Lenovo software shows that the Base system device driver is not installed. I can't find a way to install it. I tried installing driver exe files and searching the same files using the browse-for-the window Windows files during the installation of the drivers for the Base system device.
Seriously, * beep *? I lost more than two hours on Sunday morning trying to solve this problem. It worked yesterday. I did install new software crazy, or any software besides. Why this happens and more importantly, how can I FIX it?
This morning, ran Windows automatic update; I don't know if the updates were designed to the card reader, but the driver is now installed and the operation of the device. Too many updates to list them all, but thank you all for your help. Between the time I opened this thread and now probably I rebooted my machine 30 times and tried all combinations of drivers + restart. Then, poof, this morning, it is fixed.
-
HP probook 4540 s missing 2 x base system device
Hi... I install windows on my new 4540 s HP's Probook. I have install all the drivers but two base system device, I can't find.
The hardware ID:
1 base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
base-2 system device
PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2393 & CC_088000
PCI\VEN_197B & DEV_2393 & CC_0880
Please post here link to download the driver. Thank you
Hello
Download and install the driver from this link JMicron card reader.
Kind regards
DP - K
-
Device driver base system missing + volume buttons do not work
Hello
I have a SL400 and upgraded to windows 7, sold separately, as I bought before June 29, 2009. I installed the op system and 4.0 thinkvantage system update to install the drivers. Just fine, except 1 thing (actually 2) as Device Manager indicates that it y 2 missing drivers, poster-->--> Device(this displayed 2 times one under like 2 drivers are missing) Base system devices. I don't really know what devices here as it is not indicated. The other problem is that the volume buttons do not work. It is more updated available through the TVT system so update... No idea what can be the problem?
Thank you
David
All right, had basic system--> Ricoh card reader device. Installed the driver and works correctly. The volume buttons still do not work.
-
HP DV9925nr &; Base system devices
I tried Vista downdrading, without success. I revented back to Vista and that you have installed all the appropriate readers, but I can't find the right drivers for (2) Base system devices (see image). I consider my computer self very informed, I installed provided chipset but still can not get this to work. Any help would be appreciated.
Install Ricoh 5-in-1 Card Reader here
-
Dv4-1430us: lack of Base system device drivers
I just clean installed W7 Home Premeuim after a failed attempt of W10, it seems that I'm missing three "base system device drivers. I went to the HP page where the drivers are usually, but I don't see all the downloads.
If the download page of is the mystery pilots BSD here? Windows Update can't find them.
DV4 1430USHello:
You need this driver for the card reader (Base system Dev):
This package contains the driver for the JMB38X Host Controller Card Reader to
models of portable supported and operating systems. JMB38X card
Reader supports the following types of media: SD, MS, MMC and xD. -
HP ProBook s 4730: lack of Base system device drivers
Hello world!
A few days ago I received an error message that my device Base and an unidentified device system no longer have the drivers installed for them (Code 28). This can happen after my last update of Windows, but I'm not too sure. When I try to update the drivers of the device for each Device Manager, Windows cannot find a driver for the device.
These are devices that are affected (not sure if you need the hardware ID, but I included them):Base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
Unidentified device
USB\VID_138A & PID_003C & REV_0086
USB\VID_138A & PID_003C
Don't know if it is also related, but my Standard VGA Graphics Adapter is also having similar problem and cannot start (Code 10):PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C & REV_00
PCI\VEN_1002 & DEV_6760 & SUBSYS_167D103C
PCI\VEN_1002 & DEV_6760 & CC_030000
PCI\VEN_1002 & DEV_6760 & CC_0300
I use Windows 7 Home Premium (64-bit).
I saw that I can download the drivers from the HP site, but I'm not really sure which ones do I need to download. Some people recommend that you download the chipset, the audio media and network card drivers for my laptop to try to solve the problem.I can compare the drivers with the names of device in Device Manager, if that's the best way to go about it. I wanted to just a few tips on the best thing to do.
I have some knowledge of the software, but I don't mess with hardware very much, answers in layman's terms would be greatly appreciated!
Thanks for your time. If you need some info on my ProBook, let me know.Hello:
You need these drivers...
Base system device:
The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe
Unidentified device:
This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.
FTP://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59624.exe
Standard VGA Graphics adapt:
This package provides the AMD video drivers, driver audio Control Panel and HD for laptops taken in charge who are running a supported operating system.
-
EliteBook 8440p: lack of drivers for the Ricoh Bay8Controller and Base system device
Hello
In the Device Manager my EliteBook, under the heading other devices, I have the 2 below devices for which no driver is installed. What are and how to upgrade drivers (Windows cannot find drivers)?
- Device base system with hardware ID:
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C & REV_14
PCI VEN_1180 & DEV_0843 & SUBSYS_172A103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880
- RICOH Bay8Controller with hardware ID:
PCMCIA\RICOH-Bay8Controller-F1B2
PCMCIA\RICOH-Bay8Controller-0000-0000
PCMCIA\RICOH-0000-0000
Thank you for the support!
Hello
Try this link
-
HP Pavilion dv8-1099eo: device Base system and unknown device drivers Windows 7 Ultimate lack
Hello
Since a new installation of Windows 7 64 bit it is has little material without driver on all simply not recognised. Here is the hardware ID's I hope someone can help get this sort? Laptop computer runs much slower with the CPU it has. An upgrade from 4 GB to 8 GB of RAM is useful?
1. base system device
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_08802 - system base unit
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_08803. base system device
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_7001103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_08804 - unknown Device
ACPI\ENE0100
* ENE0100Thank you
Michael
1, 2 & 3 is listed under "Driver-storage" JMicron card reader ACPI\ENE0100 should be ENE CIR Receiver Driver under "driver-keyboard, mouse and input devices.
On your page of Support here:
-
Hello, I am using HP ProBook 4730 s, produces A1E71EA. I recently installed windows 7 ultimate x 64 and I went to install my drivers. Here, I have two of them that say "base system device" when trying to update automatically using the upade driver it says that it cannot do. I also he who says network controller, one is bus USB, pci simple communication and an unknown device.
Can you help me please?
Hello
For the first 2 hardware ID, install the below card reader driver.
Then, install the following:
Kind regards
DP - K
-
Hello
I have a HP Pavilion dv5 - 1183cl has been upgraded from Windows Vista to Windows 7 Ultimate (32 bit) and I have a few questions.
I have four errors appearing in my device manager, three Base system device and an unknown device, and I don't know what they are or where to find the drivers (since I don't know what they are). In addition, the battery will recharge not (it doesn't seem to be anything wrong with her physically). I wonder if the errors below are related to the battery issue. This is the hardware for each error entry ID.
Basis of the system of the device (bus PCI 6, device 0, function 1):
PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_0880Basis of the system of the device (bus PCI 6, device 0, function 3):
PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880Basis of the system of the device (bus PCI 6, device 0, function 4):
PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880Unknown device (on Intel(r) ICH9M LPC Interface Controller - 2919):
ACPI\ENE0100
* ENE0100Someone at - it solutions? Thanks in advance,
Jason
Your model has Windows 7 drivers posted. ENE CIR Receiver Driver & JMicron card reader driver, you must:
-
HP ProBook s 4330: working in window 10 missing/no Base system device drivers
Hello
I installed window 10 and since then, I have had different problems.
Lately, I noticed that the device driver Base system is not working and also something else not identified.
Please find below Haedware IDs for those who do not work the drivers
PCI\VEN_197B & DEV_2393 & SUBSYS_167E103C & REV_30
USB\VID_138A & PID_003C & REV_0086
ACPI\VEN_HPQ & DEV_0004
Can help you in there to fix it please?
Thank you
G
Hello:
You need these drivers for devices...
The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.
FTP://ftp.HP.com/pub/SoftPaq/sp60501-61000/sp60769.exe
This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.
FTP://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66915.exe
This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.
-
Pavillion dv 9074cl: drivers missing for coprocessor and Base system device
I have a Pavillion dv 9024 cell cl. OEM OS is Windows XP. I improved by doing a clean install of Windows 7 (64-bit). Miss me now drivers for 1. System of base and 2 device. Coprocessor. Are they necessary? If so, how can I find and install the drivers?
Hello:
Here are the links to the drivers you need for these two devices...
Coprocessor:
This package provides the driver for the NVIDIA nForce Chipset in the notebook models and operating systems.
File name: sp36079.exe
BSD:
This package contains the driver for the Ricoh 5-in-1 card reader for laptops models and operating systems.
File name: sp34639.exe
Maybe you are looking for
-
Hello everyone... I have been using my iPad 12.9 pro for a while now, and I have a question about the slide mode, which I really hope you can help me. I wanted to be able to choose what applications are indicated on this side bar (View Slide Bar), si
-
Add at the beginning of the file by replacing the old content
Hello My file size should limit to 20 MB, after crosess 20 MB file I have to write my data at the beginning of the file. Here, I have replace the oldest data from the beginning without affecting all the other data of the file and this process should
-
Media Center for XP 2005 stuck to get updates to the guide
rebooted, tried to reinstall the MediaCenter and after selecting the cable service, according to, it's just hangs. do not extract the data from the guide, or cancel the download. tried to manually plan update and the Planner replanning just another
-
Error installing the camera Kodak Easyshare failed on Windows 7
Original title; Photos of transfer problems. Device is not install properly I bought a new Kodak easy share camera. When I plugged in my computer transfer pictures USB driver said that installing the unit has failed and the camera does not appear on
-
No matter how many times, I'm trying to upgrade the level of play that soon I push enter again game, it comes down to benner