Re: Portege M800 - light does not

Similar Questions

• Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

  Hey guys

  just got my companion to upgrade me for win 7 64 bit.
  Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

  "driver open webcam fail. Please restart camera or computer.

  See you soon

  Hello

  Seems that you used the wrong webcam software/driver or is not compatible
  You must use a webcam Chicony Win 7 64 bit software.

  > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
  The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
  You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

  Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

  Welcome them

• Portege M800 - Touchpad does not properly on Windows 7

  Hello

  In windows 7 the touchad does not work properly, which means I can't scroll pages by dragging my finger on the edges of the touchpad. It worked perfectly witn Vista and now it isn't. I have the 64 bit version.

  I tried new drivers, but there aren't any. How should I solve this?

  Thank you

  Hey Buddy,

  You have the most recent driver for the touchpad? Usually the Vista drivers also work on Windows 7.
  Check this box!

  In addition, the exact model number would be interesting.

• Portege M800 - Microphone does not work after upgrade to Windows 7

  Hello world

  I have a Portege PPM81E and am unable to get the microphone not working after having upgraded to Windows 7.

  I tried all the drivers I could find, but no luck.

  Is there anyone out there with the solution?

  Thanks in advance!

  Just a few questions:
  You have upgraded original Hat version of Vista you have with your laptop or you have installed the clean version of Win7?
  All hardware components are correctly installed and listed in Device Manager?
  How do you test feature mic?
  Microphone is in the sound properties > recording devices?
  MIC is set as default device?

• Police Segoe UI Light does not

  Segoe UI Light does not work in Firefox 8 when you use it in CSS.

  You may need to use additional selectors to get this specific light family group Segoe UI font.

  See this for an example on Arial.

  • [797446/questions/797446]

• CD-ROM for Portege 3500 recovery does not work!

  I have a Portege 3500 tablet pc and the recovery cd does not work.
  I followed the instructions but nothing happened to my windows again!
  Can you tell me please how can I get my phone?
  Thank you

  Hello

  AFAIK the Portege 3500 dose does not support internal CD/DVD players.
  Have you used an external hard drive that is compatible and supported for boot from the CD?

• Satellite M30: Wireless light does not come

  My wireless on my laptop light is not.
  I switch wireless enabled but the light does not come and my router is turned on.

  Also, I can't check the local networks.
  Could someone help me identify this problem?

  Hello

  The wireless network card is properly installed and listed in Device Manager? To check first please all NICs.

• PPP light does not blink

  The ppp of light does not illuminate & cannot connect 2 sites only 2. Always have access to all other Web sites & email. What can I do to fix this?

  Hello

  These websites is secure? You did changes to the computer?
  What Internet browser do you use?

  Method 1.
  For modem problem, you can contact the modem manufacturer. As far as websites are concerned, I would ask to add these sites to the zone of confidence and check.

  Method 2.
  a. If the problem persists, I recommend allows you to optimize the internet explore.
  See the article below for steps optimize internet explore. Also check if you can access these webistes in mode without modules if you have Internet Explorer 7 or above.
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How reset internet Explorer?
  http://support.Microsoft.com/kb/923737
  IE reset warning:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.

• "Accu full, 100%" but the green light does not illuminate.

  Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

  No idea why - and how to fix it?

  Thank you.

  Hello

  What brand / model of the laptop?

  If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
   
  See the link, then run the Fixit.
  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
  Method 2:
  
  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

• Portege M800-103 - Bluetooth not working not not Linux

  Hello.

  I have a Toshiba Portege M800-103 (PPM81A) and a system to dual-boot with Windows Vista and Ubuntu 8.1 x86_64 (recently installed).
  Almost everything works well under Ubuntu except bluetooth, which is not yet recognized.

  I also tried the omnibook and the toshset (with unbearable = 12) drivers. I have had no success at all.

  Little help would be greatly appreciated!

  Thank you

  Have you checked OS support for this model of laptop computer?
  As much as I know this Portege is not Linux supported and Toshiba doesn't offer BT stack for Linux.

  Have you checked some Ubuntu forum? Maybe you can find some useful information there. I imagine that a lot of people have the same problem with the different laptop models.

• Portege M700 Wacom does not respond after hibernation

  I've been using the M700 for two months and I met a very annoying bug. It is not mentioned in this forum so far, but there are other reports on the Internet who mention this problem too. (http://forum.tabletpcreview.com/showthread.php?t=16902)

  * Question: *.

  Tablet is placed in hibernation. When he wakes up, everything seems OK. When you use the stylus or the key functions, that the cursor does not move. Tablet and pen services have not crushed, but there is no link between screen/digitizer and software.

  + Technical support +.
  The series/USB connector is not reset after waking or hibernation is dead the serial connection

  * I tried solutions *.
  So far, I have reinstalled Vista, tried XP (and will stick to it because it's a better OS in many cases) and have reinstalled all kinds of drivers Wacom.

  * What we want *.
  Wacom has also seems to be aware of the problem but says it's a matter of Toshiba. I am impressed with the construction and the quality of the M700 (it is a replacement for my robust but now almost unusable M200 and I have a M400 too, but I never liked it) and this issue is the only glitch I meet.
  I would like to know if anyone else in this forum has experienced a Wacom-coma after the resumption of the hibernation or standby, and if so, if they have found a solution (apart from restarting their PC)

  And I would really like a response from a representative of Toshiba review of this question.

  Hey Buddy

  I m not a M700 owner and, therefore, I can not say much about this issue, but to my knowledge, there are a few different problems with Vista and hibernation mode.
  For example, device high definition audio, screen WLan failed after the resumption of hibernation.
  These issues were definitely Vista problems.

  Installed on Portege M700 Tablet d River was developed by Wacom, I wonder why the guy States that it is a Toshiba issue?  :| (perhaps because this Toshiba laptop s ;)))

  Anyway, you said that you have reinstalled the driver for the tablet of the Toshiba page and updated the Vista of the State. Check the BIOS updated maybe he could improve the functionality

  If this does not work I recommend you contact the ASP to find out if there is a known issue

• Portege Z30T-a does not start

  Hello, can be here can someone help me.

  After of unknown causes, perhaps after it was switchable to hot RAM or another, all of a sudden my laptop does not start Z30T-A. How to say, after the press, there is 1 or 2 second screen sound and black fan and autoreboot. After the reboot, I see bright screen with its strong constant cooler and no action in the future.

  I try to start without battery, only with adapter ac - same situation... without ram or ssd - same situation... i ' l reconnect adapter wifi, keypad and all hardware components - same situation - no start.

  After that, I'll give this notebook to my friend, who work in the center of laptop repair.
  After a few tries, he said, which can be a problem with the bios (bios can be deleted all of one or another error, which cannot provide no boot), or perhaps by this problem with CPU.

  I chose the update of the bios, because it's the cheapest option. My friend can desolder the bios chip and via special equipment download a new.

  But we don't have bios for Z30T-A.
  He said that all versions in part support on toshiba sites are inappropriate.

  It's ok if you refresh or download it via capable of mobile work. I try to get e-mail support for toshiba BIOS, but they only have version bin and my friend say that he needs another, not bin... of course, we can buy motherboard on ebay (in our country, it's no support computers laptop toshiba) but it's expensive.

  Also, my friend told me, he can download it via the bios from another laptop same special equipment, but we do not have it.
  Maybe somebodey here can help me.

  To be honest, I can't imagine how an EPROM of the BIOS could be deleted without performing such procedure previously.
  That's why I put t think that this laptop is problem BIOS
  Your friend could be the problem but anyway

  However, you are looking for the BIOS?
  All BIOS versions can be downloaded from the Toshiba U.S. page:
  http://support.Toshiba.com/support/d...ext=1200008173

  The WinRAR ZIP file includes both Windows and disk based according to the BIOS update installation options.
  You should see the documentation included for more details.

  

  Here is the link for a direct
  BIOS version 4.00 for Portege Z3x (PT241x/PT243x/PT24Ax/PT24Cx/PT24Ex)
  http://cdgenp01.CSD.Toshiba.com/CONT...s/t241v400.exe

• Camileo h10 flash or movie light does not work

  Hey,.
  Does anyone have any ideas as to why flash does not work on my h1o camileo camcorder. ? or the pilot light.

  Thank you

  Neil

  Please help somebdoy!...