Drop-down list of signal problem?

Similar Questions

• Drop-down list C5.5 problem with corresponding colour/color

  Hi, is it possible to change the color of the letters that appear in the drop-down lists for a corresponding question to 5.5?

  I use white text on a gray background for my slides of quiz, which is nice and easy to read, but then in the preview the letters in the menu drop-down appear as white text on white background. I don't see a way to change the font in the drop-down menu back to black (as it is on my opinion edition), without also changing the color of the text of the response.

  Is there a way to change this?

  I just tried covering the lists of more than a piece of the background image - so that the user doesn't even know they are there, but the quiz slide ordered the image behind the lists.

  Otherwise it is a way to change the color, is it possible to have a corresponding slide without a drop-down list at all?

  Thanks for reading

  Lynn

  Hello

  The color of the text can also be changed. Once finished with the Manager object model to change the drop-down color menu, you can then change the color of the text through the category of characters under the properties on the right side panel. See below:

  

  

  I hope this helps!

• Re: problem with menu drop-down lists.

  Hello everyone,

  I am facing a problem with the drop-down lists in my application, I have 4 drop-down lists one under the other. The main problem follows here, the second list is being covered by the first list when the first list fell down. How to get rid of it, any suggestions please,

  Thank you and happy new year.

  You must listen to the update and then change the order of objects.  Seems odd that RIM does not perform this themselves because it is a problem long been known.  A few other controls have similar problems.

  Community Library:

  import flash.events.Event;
      import flash.events.FocusEvent;
  
      import qnx.ui.listClasses.DropDown;
  
      public class DropDown extends qnx.ui.listClasses.DropDown
      {
          public var dataField : String = 'data';
          public var defaultSelection : * = '';
  
          /////////////////////////////////////////////////////////////////////////
          public function DropDown()
          {
              super();
              this.addEventListener(FocusEvent.FOCUS_IN, HasFocus );
          }
  
          ///////////////////////////////////////////////////////////////////////////
          private function HasFocus( event : Event ) : void
          {
              this.parent.setChildIndex( this, this.parent.numChildren-1 );
          }
  
          ////////////////////////////////////////////////////////////////////
          public function set selection( value : * ) : void
          {
              var entry   : Object;
              var counter : int = 0;
              for each( entry in this.dataProvider.data )
              {
                  if( entry[ this.dataField ] == value )
                  {
                      this.selectedIndex = counter;
                      break;
                  }
                  counter++;
              }
          }
  
          //////////////////////////////////////////////////////////////////////
          public function get selection() : *
          {
              return this.selectedItem ? this.selectedItem[ this.dataField ] : this.defaultSelection;
          }
      }
  

• Problem with drop-down list that prevents the use of the functions, will not go away.

  Hello

  I have Windows 7.  I could not afford MS Office, so I downloaded OpenOffice and, later, LibreOffice.  My problem is, when I open a document to write in a program, a drop-down list (formatting) is displayed.  It starts with "Default" at the top.  The box does not work, if I click on anything that it just flashes.  Or it will disappear.  I tried everything I can think of to get rid of him.  And, as long as it's here, I can't write to a document.  I can close, but only by closing the program.

  Is this problem only with free Office programs.  Sometimes when I am looking for a program in Windows 7, or if I'm looking for the Help menu in 7.

  I'm not very savvy computer.  If you would be interested to help me, thank you very much, but please don't expect me to know some thing on anything whatsoever.  I used to use the mode BACK back in the day, but the subterrain of computers is a subject that I've lost contact with long ago.

  You can also try to test with another Windows user, in case you have a corrupt user profile.

  If things were OK and then maybe a few days ago, System Restore is an option.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  Don't you see the same problems in Mode safe?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• Problem with drop-down list: under Windows, it works, on Mac is not

  Dear forum,

  I'm reworking the script MultiPageImporter2.5 by Scott Zanelli; going to add new features.

  So far, I added a drop-down list so that the user could choose which pages to put a pdf/indd file: odd/even/as well.

  

  However, I encountered a strange problem: on Windows, it works as expected, but on Mac, nothing happens when I click on the shortcut menu. When I write a dialog box, I almost always use the automatic layout and never encountered such a problem before. But in this text the author uses a fixed position for the controls so I followed his style of coding:

  dLog.pageSideMode = dLog.pan4.add('dropdownlist', [10,110,180,40], ["Odd and Even Pages", "Only Odd Pages", "Only Even Pages"]);
  dLog.pageSideMode.selection = pageSideMode;
  

  The drop-down list is visible both on Windows and Mac, but on a Mac, it is not clickable. What I am doing wrong?

  Another question: in the script, the author has created three pop-up windows. In the code, each popup has a different height (the last element of the array 'limits') - 60, 88, 33. Does make sense to make them different if on the screen they are exactly the same (I mean height).

  Here's my version of the script.

  I think the easiest solution for me here is to rework the part fixed dialog for automatic layout.

  Thanks in advance.

  Kasyan

  Hello

  I don't think you're doing something wrong. If you change the vertical position of the popup to 90, the popup works if you click at the top, not if you click on the bottom.

  I think that you have found a bug in the previous DAY.

  P.

• Problems with HR 9Printed Documentation do not display windows popup, drop-down lists and links

  Generate a Word document for reviewers. PrintedDoc properties include: maintain links Hypertext; Include text from the drop-down; Include text enlargement.

  • Sometimes the Word 2010 document contains links, sometimes it doesn't.
  • Pop-up windows does not work normally in the document Word.
  • Menu drop-down and expanding text appear intermittently in the Word document.

  Has anyone experienced this and have a solution?

  Thank you.

  Carol

  I have never known failure except in two cases, hyperlinks.

  1. The target field is not in the printed document. It cannot obviously a link to something that does not exist.
  2. The hyperlink is a popup.

  Not sure what you mean by popups not working only not in a printed document. If you mean that links to these break, then see above. Known issue.

  I don't know why you are having the drop down list, growing problem of text that I didn't know that it is a problem either. Is it always the same drop down menus that fail? Have you compared a good drop-down list and a bad dropdown?

  Take a look at the Documentation printed on my site.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Problem of form drop-down list

  When I create a form drop-down list box and that you have more to say 10 points with values and trying to modify a list item, I cannot select an item (say #10 on the list).  It is another element in the list.  If someone has had this problem or does anyone have a solution?  I want to attach the file, but I don't see a way for me to do.

  Are the options and the single export, without duplicate values?

  What version of Acrobat?

• Problem with the drop-down list related calculations

  Hi all

  I worked on a leave form using Adobe LiveCycle ES2 Design for more than three weeks. I am new to my work computer applications programming, and I've not had many world real experience with Javascript. My problem is that I have two drop-down lists in two separate subforms. I have a separate box for users to insert the number of hours of leave, they want to take next to each drop-down list. At the bottom of the form, I have a subform that I want to track the total number of hours for the type of leave, the users selected in the drop-down list.

  I tried several methods of JavaScript to FormCalc, but I succumbed to find a way to indicate each of my category of leave amounts to fields to reflect the value in field hours (this is... if the leave type list specifies the type of leave). I'm tired of scouring the Internet and books to see if I can find a viable solution to this subject. I have another issue to discuss with this same form regarding my case to add calculations, but he will have to wait until I am able to get this rectified issue. Can someone help me?

  

  The script necessary to each calculation of total field.

  The only thing different between them, it's the '6' is changed for each category (i.e. personal leave is '0'). FormCalc select in the script editor. It really works in your form - guaranteed!

  Older var = _IndvSubForm.count

  var totHrs = 0

  for i = 1 to older don't

  If (IndvSubForm [i-1]. DataDropDownList2 == "6") then

  totHrs is totHrs + IndvSubForm [i-1]. TotalHours2

  continue

  on the other

  continue

  endif

  ENDFOR

  $ = totHrs

  Good luck

  Stephen

• Attendance problem when you use a drop-down list

  I'm trying to show/hide a table when a choice is made in a menu drop-down. It does not work until I did the same thing twice, then I get the expected result. The script is changing and I have used it before with success, although it generally uses a check box. Y at - it an easy solution if everything goes well for this problem? Code below:

  If

  (this.rawValue == 2)

  {

  Form1. Page1.OrderSection.OrderItems.blower.presence

  = 'visible ';

  }

  on the other

  {

  Form1. Page1.OrderSection.OrderItems.blower.presence

  = 'hidden ';

  }

  Thank you

  Drop-down lists work slightly differently than expected. the Change the rawValue event contains selected text previously.  That's why it works the second time.  The current selection is contained in: xfa.event.newText

• Problem of editable drop-down list.

  Hi all

  • Here's the question. I have a list/menu editable drop-down list in a table. The table is hidden when the page is loaded. When the user clicks on the link to open the table, editable drop-down list is only 1 or 2 pixels wide. How can I get the editable drop down to open up the prescribed 300px?

  Here is the code:

  < select name = "CGSector1" id = "CGSector1" wdg:subtype = "DynamicInput" wdg:type = "widget" wdg:recordset = "rsCGSectors" wdg:displayfield = "CGSectors" wdg:valuefield = "CGSectors" wdg:norec = '150' wdg:singleclickselect = "yes" wdg:defaultoptiontext = "" wdg: don't restrict = "" wdg:ext = "php" style = ' width: 300px "wdg:fakeattribute =" <? " PHP WDG_registerRecordInsert ("connStr_xxxxxx", "rsCGSectors", "CGSectors", "CGSectors");? > "> < / select >"

  Thank you.

  Brian

  As this problem is not directly related to the MEASUREMENT, but assumingly rather to such aspects as defined (if any) width of the table initially hidden, please give a link to the page code in its entirety (or page) to help others to find the possible reason.

  However, it is worth mentioning "editable dropdown" ADDT´s is generated on-the-fly using AJAX features some owners as well (including rendering style), then maybe the style you setting defined here just gets ignored when the surrounding 'container' (aka table) becomes hidden - for example - using features from another library like JQuery AJAX that is certainly incompatible with that ADDT´s own implementation of AJAX.

  See you soon,.

  Günter

• still problems with drop-down list fill the Script

  Well, I used the information I got this forum to fill a drop in a repeatable subform with javascript (and it even works with FormCalc) problem solved. But now when I test the script in format acrobat (with calculations) the last item on my list does not seem to be working properly. They are scripted like that on the preOpen event.

  DropDownListName.additem ("item 1", "1.00");

  DropDownListName.additem ("item 2", "2.00");

  etc.,

  etc.

  They are all the same, and they all show during the test. But when I click on the last item, it automatically entered the first element on the form and for some reason that I don't know, when I click on the arrow to the bottom of the drop-down list once again, will be my listed items 1-6 and 1-6 new (Double listing the items). If I click it a third time he triple will list the elements... Weird! Maybe I'm just tired, but more probably think I do something wrong (again!) Anyone have any ideas?

  One more thing so I don't have to add another post and I hope you people leave him alone. How do the total field sum of script so we round to the nearest cent (1.856 = 1.86) or which is not easy

  Hello

  The second issue of additional items in the drop-down list is easily sorted by including a line in the preOpen to clear the list first.

  DropDownListName.clearItems ();

  This should go before the addItem script.

  This erases the existing list, before be filled again. You would tend to use addItems, where list items will change according to the previous intervention of the user with the form.

  Regarding the round total, you can do this with script (check "Round" in the help file), but it is not necessary.

  When you have the total selected object, just go to the object/field tab and click models. On the display tab, you can select a model of currency with the currency symbol, the 2 decimal and thousands separator (IF your item is a numeric field).

  

  Good luck

  Niall

• Set point problem selected in the drop-down list box that is the XML data provider

  HI - new to Flex, experienced Java dev., hoping someone can help me see the light of what should be easy but...
  
  I have a Flex 3 MXML application form that contains a ComboBox as follows:
  < mx:ComboBox id = "physRegion" editable = dataProvider = "{regionRequest.lastResult.region 'false'}" / > "
  
  The combo box is filled by the provider of data like:
  MX:HTTPService id = "regionRequest" url = "flexDAOServlet" resultFormat = "e4x" method = "POST" >
  < / mx:HTTPService >
  
  and the underlying XML code looks like this:
  <>region
  Northland < label > < / label >
  < value > 1 < / value >
  < / region >
  <>region
  Auckland < label > < / label >
  < value > 2 < / value >
  < / region >
  ...
  
  Drop-down list box loads the XML code very well. the user can select an item and the appropriate value is submitted to the server without problem. My problem is when I want to "recharge" the form with previous values.
  I can reload the text without problem fields.
  
  But I can't work in my ActionScript function, how to set the combo box so that it displays "Auckland" for example, the element with the value = 2. I'll be back this server id, even if I could get the XML code or label if that would help me solve this problem.
  
  I tried physRegion.selectedItem = "Auckland" - nope. "
  I tried physRegion.selectedItem = 2 - nope.
  I tried
  var XML = myXML:XML ("< region > < label > Auckland < /label > < value_2 > < value > < / region >");
  physRegion.selectedItem = myXML;
  and - nope.
  
  I know that I'm a new style user here error (and thank you for reading this far! your patience is appreciated) but I can't for the life of me see what it is. Can anyone help?
  
  Many thanks in advance for clues. Apart from that, I'm loving Flex.
  Kind regards
  Adrian

  Two things to note. The only problem with the function that has provided ChiefRocka00 is that it is based on the identifier of the data, which means your always limited to have that be the identifier of your value. Personally, I'll be back queries a lot of times where the labelFIeld and dataField aren't labels / data pairs a suggestion would be to add a third parameter and have it checked for this identifier instead of the data. The other thing to note is that it is more common to use selectedIndex instead of selectedItem. If you do not want to do something more like physRegion.selectedIndex = selectCboIndexByData ("physRegion, ' Auckland", label) by using the update function of

  public void selectCboIndexByData(theCbo,_theDataValue,_identifier:String):Number {}
  for (var i: Number = 0; i< thecbo.dataprovider.length;="">
  If (theCbo.DataProvider.getItemAt (i) [ID] == theDataValue) {}
  Return i;
  }
  }
  return 0;
  }

• Problem in drop-down list in the column Selector?

  Hi friends...
  I use the view selector to column for the first time in OBIEE.
  I have this problem:
  
  (1) even if I chose the columns in the left pane, my drop-down list is not filled with the corresponding values? Please let me now how to fill the drop down in the column picker.
  (2) I have a column count that has almost 1000 enteries of integers ranging from 1 to 500. I put only 5 values in my County of drop down (like the 50, 100, 200, 250, 500) that actually filters the column number as (less than these values). Suppose that user select 50 so it will filter the report less a 50-count indictment.
  
  
  Thanks in advance

  Hi Toony,

  for your second question... I don't know where you want to display these values if variable County presentation or somewhere else... ??
  Anyway, if it's in the guests... then follow these steps

  For column filter prompts:
  Select this particular column and create the bins on that particular column so that these 5 values and give the same name for this particular... as value...
  for 50--> 50 as display name
  for 100--> 100 name allow... like wise for the user to understand...
  Now create the same column guest on this particular column... and moving forward

  Variable application:
  In the variable of the presentation, select display , select the SQL... (some thing like this option, I don't remember exactly what it is... but using this, we can write the SQL code to display the values in the drop-down list)
  There, you write the following SQL code SELECT columnname FROM SubjectAreaName WHERE ColumnName IN (50, 100, 200, 250, 500)
  As we filter the values of column to contain only the values that we mentioned...

  It can helful for you, if it's not... Sorry for wasting your valuable time

  Thank you & best regards
  Kishore Guggilla

• Problems of dynamic drop-down list box

  Hello

  I have a requirement for a list dynamic downdown.

  I use javascript itself to fill the 2 text fields in the drop-down list.  I need the list/menu area drop down to be able to have options to input from the user and the drop-down list. I selected the "user entered - optional" compared to the setting but does not seem to work.

  The drop has used names and if a new employee joined this company and I do not know the end user can enter the name of the employee in the field.

  I have attached a pdf file version.

  Any ideas or help would be great.

  See you soon.

  Hello. All you have to do is check the box "Enable custom text entry". You can find the object box > cell phone

• Problem of multiple drop-down list

  What I have is a form that has a dropdown menu with a list of letters, the alphabet, and what I want to do when the user selects a letter, I want a query to execute to complete the second dropdown with a list of all the name, first name that begins with the letter that the user has selected just with the re-loading of the page or javascript. The table name has more than 10,000 lines, so you can see why I do not want in the drop-down list first and why a javascript array will not work for this application. Any ideas?

  AutoSuggest. CF8 has this feature, too.
  If you are not on cf8, studying with the help of Rob Gonda's AjaxCFC.

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com/