Drops after vMotion network

Similar Questions

• Microsoft NLB and after vMotion network connections

  We have several hosts ESXi (4.0) one of them containing a virtual member of a NETWORK 8 Server Load Balancing cluster.

  When I migrate all servers to host containing the Member of NLB cluster virtual that I can no longer connect to one of the other 7 members. But the strange thing is I can reach any other machine on this host as well as not been transferred there recently (I don't know what triggers it)

  The migrated machine can reach any other machine not in the NLB cluster.

  The cluster is located in multicast. and is in the same subnet as the other servers.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1006525

• vmotion - box connected network card question is uncheck after vmotion

  Hi all

  I have a strange problem in Cluster DRS / rules of VM, we do vmotion

  After doing vmotion, VM addresses don't not ping, in the first time I think it's trunk network was not good.

  Do vmotion on the source host and not work.

  After checking configuration of the virtual machine, I see that "Connects" network adapter box is not checked.

  The box was check before, because the ping response machine before the vmotion.

  My question is very simple you already have this behavior?

  I use the following script to facilitate the operation.

  Thanks for your help

  Ludovic112

  $pViServer = '< servername > '.

  
  If ($viCon.IsConnected - eq $false - or $viCon.IsConnected - eq $null)
  {
  $ViCred = get-credential
  $viCon = Connect-viServer-Server $pViServer - Credential $viCred

  }
  
  $vmName = "< vmname >.

  
  $maVm = get - vm $vmName

  
  $cluster = get-cluster "< NOMCLUSTER >".
  $Listvmhosts = $cluster | Get-VMHost

  foreach ($vmHost to $Listvmhosts)
  {
  If ($maVm.host.name - eq $$host.name)
  {
  Write-Host "nothing to do" $maVm.host "-" $vmHost.Name
  }
  on the other
  {
  Write-Host 'migrate' $maVm.name 'to' $vmHost.Name
  Move-VM - VM $maVm - Destination $vmHost
  sleep - 60 seconds
  }

  }

  If the connected box gets uncheked after vMotion, looks like the maximum number of ports configured for your vSwitch on your target hosts is exceeded...

  / Rubeck

• Major Frame Drops after 5-10 minutes

  Hello world

  I'm really frustrated here, I'm a game developer, and I use the GPU in almost all cases, from Photoshop to unity still play games myself. Since the last update 10.11.4 I have this huge problem , and everything I do will not disappear.

  Whenever I run an application / game that rotates with GPU I get spikes massive lag and thus Frame Drops, they last about 1 seconds but they occur every 30 seconds - 1 minute, this is a huge deal for me and I can't really work like that. Of course, I put photoshop to the CPU usage for now and no problems. But I really need to work efficiently and without Frame Drops.

  I run at El Capitan with a Macbook Pro LATE 2013 10.11.4 @.

  2 GHz Intel Core i7 (CPU)

  8 GB 1600 MHz DDR3 (RAM)

  Intel Pro Iris 1536 MB (GPU)

  Before someone says I should have got the Nvidia gpu, I should mention that I tried on 2 games to 1 which I played with ease previously:

  Hand of fate

  The Witcher: Enhanced Edition

  Please if someone else has the same problem, make sure that post you here. It bothers me that I have not found anything about the case.

  I also ran an EtreCheck if anyone is interested:

  EtreCheck version: 2.9.11 (264)
  Report generated 2016-04-16 15:29:41
  Download EtreCheck https://etrecheck.com TIME 01:31
  Performance: Excellent

  Click the [Support] links to help with non-Apple products. Click the [details] links for more information on this line.

  : Another problem
  Description:
  Whenever I use an application that uses GPU or if I play a game, I get large Frame drops after 5-10 minutes in application t.

  Hardware information:
  MacBook Pro (retina, 15 inches, end of 2013)
  [Technical details] - [User Guide] - [warranty & Service] MacBook Pro - model: MacBookPro11, 2
  1 2 GHz Intel Core i7 CPU: 4 strands
  8 GB RAM not extensible

  BANK 0/DIMM0
  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0
  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge Wireless: en0: 802.11 a/b/g/n/ac
  Battery: Health = battery check - Cycle count = 460

  Information about this video: Intel Iris Pro

  Color LCD 2880 x 1800

  System software:
  OS X El Capitan 10.11.4 (15E65) - since the starting time: 4 hours

  Disc information:
  SM0256F SSD APPLE disk0: (251 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 249.79 (GB free 65.99) encrypted AES XTS unlocked
  Storage of carrots: disk0s2 250.14 GB Online

  USB information:
  Apple Inc. Apple keyboard / Trackpad

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• VPN users drops after every 5 minutes

  Hello world

  We have users whose remote VPN drops after every 5 minutes.

  I need to know what things can check to solve the problem?

  The user connects by RSA Token.

  ISP connection is ok is not question.

  Something I can verify in SAA?

  Thank you

  Mahesh

  Client side, have you tested wired vs wireless to see if the problem exists in both?  If it's the only one, but not the other, try to update the drivers.  Also, if it's windows 7, take a look at the power settings in the control panel.  I saw where the aggressive powers will be stop standby network port.  Not that big of a deal in a LAN environment but it wreaks havoc on the VPN.

• H323 incoming call drops after 5 minutes each time

  Hi people,

  Can you shed any light on this please?

  H.323 incoming call (numbering by IP)-> external F5-> Fortinet Firewall-> internal F5-> internal firewall-> VCS - E-> VCS - C-> autoattendent MCU

  The call drops after 5 minutes into the call, every time. We tried H.323 call to an internal endpoint, it falls as well. Looks like there is a value of the time-out period defined somewhere on firewall he or F5?

  Any suggestion is appreciated!

  concerning

  Chenzhe

  I hope this helps:

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/infrastructure/article...

  1. Term applied to network connections through the firewall limits. For example, a Cisco PIX firewall can have a timeout of the form control:

     timeout conn 1:00:00 udp 0:02:00 h225 1:00:00 h323 2:00:00

     (i.e. a list of names of Protocol recognized each followed by a timeout in hours, minutes, and seconds). This example requires a limit of 2 hours on the H.323 connections; However, it also imposes limits on the other protocols, which would also affect a video call (UDP and H225). Several different network protocols are involved in an IP video call. The call being demolished may cause a delay applied to all of them.

• EXTERNAL VIDEO CONFERENCE DROP AFTER SECONDS

  Salvation;

  I have a MSD 15.3.0 version and TMSXE 5.3,
  I have a wooded area, with:
  10.5.2.10000 - 5 CUCM
  PRESENCE 10.5.2.21900 - 4
  TMSPE: 1.7
  CONDUCTOR: 4.2
  NŒUDS EXPRESSAY: 8.6 (EXP-E clusters and cluster EXP - C)
  TELEPRESENCE SERVER: 4.2 (4.23)

  Salvation;

  When I create a new video conference using the SCHEDULER INTELLIGENT or CMR, an external user cannot stay in a conference, this connection is dropped after every seconds.  In my vts newspapers exist the message below, where information this close due failure invitations SIP call.

  274 2016/09/12 16:47:47.768 SIP Info call 10.254.0.30:42033
  "" 16:47:47.771 275 2016/09/12 call APP Info 21: incoming new SIP call of '[email protected] / * /"
  276 2016/09/12 16:47:47.953 calling APP Info 21: "FABIO 2s" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  277 2016/09/12 16:48:09.340 calling APP Info 21: stopped contributing video, now contribute audio only
  Time from NTP Info 278 2016/09/12 16:48:10.706 is my Sep 12 16:48:10 2016
  279 2016/09/12 16:48:16.058 SIP Info call 10.254.0.30:42033
  "" 2016/09/12 280 16:48:16.061 calling APP Info 22: incoming new SIP call of '[email protected] / * /"
  281 2016/09/12 16:48:16.098 calling APP Info 22: "Leonardo Silva" has now joined Conference "Reuniao Agendada 09/12/2016 16:24.
  Appeal of error SIP 16:48:23.743 282 2016/09/12 22: close call due to failed invitations
  283 2016/09/12 16:48:23.743 call CMGR Info 22: disconnection, '[email protected] / * /"-service not available".
  284 2016/09/12 16:48:23.745 calling APP Info 22: shoot call them from "Leonardo Silva" - destroy at request end. not available
  SIP 16:48:23.835 285 warning call 2016/09/12 22: unable to close successfully the dialogue with BYE
  286 2016/09/12 16:48:31.937 call CMGR Info 21: disconnection, '[email protected]/ * / '.
  287 2016/09/12 16:48:31.937 calling APP Info 21: shoot call them "Fabio 2s" - destroy at request end. remoteTeardown
  

  I have check all information in othe Detective Conan in this forum: https://supportforums.cisco.com/discussion/12294701/telepresence-server-...

  I made recommendations, but with IX Protocol disable SIP PROFILE DRIVER and MEETING ALIAS, the same error occurs. My maximum size of incoming messages is updated to be 11000.

  Internal Conference is going on normally.

  Any idea?

  Best regards;

  Fabio Santos

  I've seen some similar behaviour in the past - on trunk SIP pointing to the highway, try to uncheck the "SRTP allowed" and see if it works.

• Forums CWMS drop after you have entered the code meeting

  Hi all

  We have webex 2.6.1.45.B - AE, call out of work, but a drop after you have entered the code-meeting... Work of DTMF.

  may be, because: you are using a trial version of the Cisco WebEx meeting server which expires in 32 days. Buy licenses to host for your system to avoid the limitation of access host?

  or someone has an idea?

  Thank you very much!

  Hello

  This problem is caused by a bad configuration of the integration of CUCM with CWMS.

  Make sure you check you SIP Trunks and SIP configuration on CUCM routing model.

  Make sure that your points in routing SIP Trunk SIP of Point Application model.

  Make sure that the Partition configured in routing SIP model belongs to a CSS that is configured in the LoadBalancing SIP trunk under:

  1. change of itinerary calling search space

  2 outside dialogue see calling search space

  Also, refer to this post to understand why the model of routing SIP and Application Point SIP trunks are used: https://supportforums.cisco.com/discussion/12879351/cucm-and-cwms-call-routing

  In addition, this guide to the official reference documentation: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0101.html

  I hope this will help.

  -Dejan

• vMotion network clarification

  Say, I activated vMotion on the management network and a more vMotion (dedicated) as well. What NETWORK card will be used for vMotion if MultiNIC is not configured? As management network must handle the rest of the network traffic, it is the only reason the management network is not recommended for vMotion?

  Hello

  Take a look at article francs on this piece

  http://frankdenneman.nl/2013/02/07/why-is-VMotion-using-the-management-network-instead-of-the-VMotion-network/

  in particular:

  "If the host is configured with a Multi-NIC vMotion configuration using the same subnet as the management network / 1 VMkernel NIC, then vMotion respects the vMotion configuration and only sends traffic through active vMotion VMkernel network adapters."

• W2K3 BSOD after vmotion

  I have a VM BSOD after vmotion of esx4.0 to esxi4.1.  I vmotioned 150 + other vm very well and it gives me the penalty.  When I put it on the 4.0 host he starts up to normal.

  Any suggestions?

  Thank you

  Regarding the comment from Andre on CPUID masks, it is an ideal place to study.

  (A) your cluster running a point of reference VCA?

  (B) If your virtual machine has a mask defined CPUID Edit > Options > CPUID mask

  (C) other virtual machines have a defined manual CPUID mask?  The masks are different than what a VM?

  (D) If you vMotion a virtual machine with a mask (for example) SSE4 enabled on a VMhost which does not support SSE4, you can certainly get a BSOD.  EVC baseline will prevent this from happening.

  Ben

• Best practices VMotion network prod.

  Our team has looked at the requirements of network speed for the VMotion network on an ESX Server.  Details to our environment, we are looking at a cluster of 8 knots with each ESX Server running over 25 virtual machines.  Given this information, a network of 1 GB for the VMotion network connection seems sufficient, or should we be looking at more closely to the provision of a connection of 10 GB?

  Thank you very much in advance,

  Steve

  best practical vMotion is a network isolated from 1 GB - 10 GB would be a stretch the network is used when a vmotion event happens and if your environment is sized correctly I don't expect vmotion occurning more than a few times per hour - and based on your virtual machines per host, I would say that you will have a lot of extra capacity--

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• VMotion network

  Hello!

  I have a cluster of 4 servers; I don't have a GigaBit switch (this is just 100 MB)...

  Can I use 6 NICs for each server. I want the network redundancy.

  Until yesterday, I had 2 servers in the cluster, and I used 2 network cards to connect the servers by a couple to cross the cables. With the virtual switch connected to the team of these two network cards I put in place an internal network and the network of vmotion.

  What is the best way to implement vmotion network in the new configuration with 4 servers? (I know that it would be best to buy a GigaBit switch, but it is not possible at the present time...)

  I can implement several networks of "point to point" vmotion each between 2 servers?

  Any help will be really aprecicated!

  Filippo

  I believe that the best practice is to have the VMotion network, share the same NIC 2 as your service console, but do them using NIC primary opposite, with one for failover.

  vSwitch0 will be groups of ports for the "Service Console" and "VMotion". Assign 2 of your network cards to the vswitch. Then for the Port Console of Service Group, assign 1 active network adapter, and the other in standby mode. Assign the nic opposed to active on the port VMotion group and use the rest of your network for traffic of comment cards.

  http://ITangst.blogspot.com

• Random virtual machines after vMotion and Storage vMotion network loss

  Hi all -

  I have a couple of tickets open with VMware and our supplier of SAN, EqualLogic, on this issue.  Since the configuration of our production and DMZ clusters we noticed that the virtual machines will sometimes drop network connectivity after a successful vMotion and Storage vMotion.  Sometimes, although much less frequently, virtual machines also spontaneously lose network overnight.  What happened only a few times.  The strange thing is that the other guests on the VM host are fine - they lose any network.  Actually, I can do no more than 3 computers virtual host to another, and 2 of 3 can switch correctly, so that we lose the network.  The work around?  Simply 'disconnect' from the virtual NETWORK card 'reconnect' and the virtual machine will start the return packets.  I can also switch the VM troubled return to the host State and it will find the network.  I can it reboot and re - win network.  I can re - install the virtual card completely, and she re - win network.

  VMware has seen a lot of mistakes of SAN in our log files in order to update us our SAN firmware to the latest version.  That seems to have fixed that but we still have the issue.  Here are some of the specifications - all environments are virtually identical except for memory:

  Of PowerEdge R810

  NICs Broadcom 5709

  EqualLogic SAN running 5.0.5 F/W

  We use frames.  ESXi is fully patched.  I haven't seen a boss or not, it is only some guest operating system that loses the network, but we are a Windows environment.

  When a virtual machine loses the network, we can not:

  • Ping to it
    
  • Ping it
    
  • Ping him at the virtual machines on the same host or vSwitch
    
  • Ping outside our network
    
  • resolve DNS, etc..
    

  I followed some KBs VMware without success, including:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003839
  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & externalId = 1002811 (port security is not enabled)

  -All the VMware tools have been updated to the latest version correct and corresponds to the ESXi host
  -Connected to the service ESXi console, I cannot ping the VM problem by name of host or IP address, but I can ping do not affected by the issue of the OTHER virtual machines.  I can also pings the service console.
  -Connected to the troubled virtual machine itself, I cannot ping other virtual machines, I can't resolve host names, I cannot ping by IP.  The machine virtual CAN ping itself by IP, but not hostname.  I cannot ping other virtual computers on the same virtual switch or network by either IP or host name.  I can't ping the vSwitch network management.
  -All vSwitches are configured in the same way and the same.
  -Notify the switches is set to yes
  -There are a lot of available virtual ports
  -We tried the E1000 and VMXNET virtual cards with no difference.
  -All cards are configured to negotiate, but we tried to force individuals speeds as well as with no difference

  I appreciate your help.  I have problems getting anywhere on this issue with the sellers.

  wkucardinal wrote:

  Still having the issue...

  Sometimes, it might be useful to really check that all uplinks VMNIC for all VLAN does work them. Try this is to create a new portgroup on the vSwitch used by your virtual machines on the host of the first, put a test VM on the portgroup, then go into the NIC teaming policy from the new portgroup and select "Override switch command failover."

  Then down vmnic all except one in unused, then only a single VMNIC is active. Then set the portgroup VLAN to a production of VLAN and try to see if we could ping some expected from the different addresses. If it works, then move VMNIC work until unused and move up to another asset. Try again, and this for all the vmnic. If it works, then you have verified that the configuration of VLANS and other settings are correct on the physical switch in the face of this host ports.

  If several VLANs, repeat the process for all other productions VLAN. Then repeat on the other hosts.

  While that may take some time, occurs if everything is properly configured on the physical switches. When occurs a vMotion virtual machine gets a new "Port code" and is assigned to a new outgoing VMNIC. If there is an error of configuration on one or more physical ports that might seem random, but may still happen on VLAN x on y VMNIC. Given that Port ID policy you use indeed spread randomly VMs on the vmnic these problems may be difficult to diagnose. (Make a disconnection of the VM vNIC gives the virtual machine a new port-ID, which it will move to a new outgoing VMNIC, which might seem to solve the problem.)

• Network drop after sign in iCloud

  Hello

  My iMac is 12.2

  

  And I have a problem, generate network (wifi connected) drop once I login to iCloud. Watch system I have always connected to the network, but the intranet and the internet are not feasible. Restarting the wifi connections work for several minutes, but that drops to network again in the same way.

  I have try all the usual stuff (used different network profiles, delete prefs files, play with the settings of the airport and etc.) not for their help.

  The funny thing is, I have another account on this iMac with iCloud user different credentials, (I use it for work), and it works very well, with no drops.

  I'll be very grateful for any idea or advice that would be useful to solve the problem mentioned.

  Thank you.

  Max.

  Using iCloud Drive or iCloud Photos?

• Unable to connect to the drop folder digital network after the installation of the new wireless router

  I have already scanned to the folder of network of digital repository on a printer HP 8500 wireless, connected to a wireless G home network. However, I recently bought a new superisolants wireless router and am no longer able to use the scan function. I now get an error message that says: unable to connect to \\Computer\Folder Make sure the remote computer is turned on. The printer on the wireless network and works very well except for scanning to the folder of the network of Direct deposit. Thank you.

  I called HP tech support last night that had me add IP address of the printer to the McAfee Firewall as an approved connection. Digital archiving to the network folder scan function works now.