Drops AP541N customers

Similar Questions

• Zeen Tablet lights. Also, is there a useful manual really knew this thing?

  Anyone know if there is a manual, really useful for this tablet - especially with regard to troubleshooting problems?  Mine went out and won't turn back on.  I tried the button on the side, berthing, sailing, berthing.  I really think that HP dropped its customers with this product.  It is really hard to use.

  Hi dpkehres,

  Follow the steps outlined in the document below.

  The eStation, HP Zeen is Unresponsive, Blank or does not turn on

  Manuals for HP Photosmart all-in-One Printer - C510a eStation

• A network error has occurred

  I just bought the player yesterday. I set up the wireless & it tells me it's connected & no problem. I check by connecting to Netflix, Amazon or pais services like that & I get a network error.

  This is completely new to me & I followed all the instructions but it won't work. Help please.

  Welcome to Sony *. Sony devices apparently run through a server from Sony before Netflicks, Amazon, Hulu, etc. Sony broadcast network has been down for the past few days, apparently not recognizing devices - and try to re-register the. I think that the problem has been resolved that I just got back my network. Of course Sony send customers who have this problem, in limbo lost to check if the problem is with the supplier of Monster/Abonimable snowman connections/Internet/Netflicks/Amazon/Hulu/Vudu/tasks solar/stephanie snow/Men in Black/rays of Venus/aliens/predators/Godzilla/Pacific Rim Kaiju/Dragons of the game of the thrones/earthquakes/Sunamis/Rod Serling... almost nothing to put the customer in a gray area of a tail spin to avoid ANY entry of Sony of respondsibility. In other words, don't believe the opposite of what they say as a shortcut to the truth. , They try to avoid any confusion by dropping registered customers of Sony an E-mail to prevent problems of network... ahhhh NO! I think they like just laugh at how long they can keep their customers spinning in ignorant oblivion. Of course, they know what is the problem. It's at the end of a set of encyclopedia of interference of an apology for blaming an another manufacturer/service providers. It is one that has 'SONY' written all over it. This is the first, last and 'Always' the cause of all our problems with Sony products. You just have to do a 'small' unnecessary work to finally get there. Rumor has it that even some have clearly as far in their endless quest to Mordor. Life is a 'small' too brief, unless you want to Sony to the center of your universe. Renounce food, work, a love life, exercise, obsessed with the troubleshooting of your Sony product. Well, you're sure to lose a little weight. Only two rules in the world of Sony: Fix and repair daily, or found on the salesfloor dead!

• Error link database to MySQL when using variables

  Hi guys
  
  I currently have a database of hava link to MySQL. I can read, insert, delete and update without any problem when using literals. However when I try to perform the same actions using pl/sql variables, I get the following error:
  
  ORA-02055: distributed update operation failed. Rollback required
  ORA-02068: following a serious error of AAA1
  ORA-28511: interruption of the RPC connection to heterogeneous remote agent using SID = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = ProdDB.btl)(PORT=1527) .net) (CONNECT_DATA = (SID = AAA1)))
  ORA-06512: at line 15 level
  
  You kindly give me some suggestions?
  
  
  PL/SQL code
  
  Declare
  
  MSISDN2 tank (8);
  IMSI2 number (28.0);
  ICC2 number (28.0);
  CNT number (28.0);
  
  Begin
  
  MSISDN2: = 610-0850';
  IMSI2: = 8950167090300132451;
  ICC2: = 702670161017765;
  
  
  Delete "SUBSCRIBERS"@AAA1 where "MSISDN" = MSISDN2; -'ICC' = ICC2 or 'IMSI' = IMSI2;
  
  End;
  
  
  -----------------------------------------------------------------------------------------------------------
  System information:
  
  Oracle Database 10.2.0.5.0 under Redhat Linux 64-bit
  
  Database portals Oracle ODBC 11.2.0.1.0 on the same machine as above
  
  UnixODBC - 3.2.1 compiled in 64-bit on the same machine so
  
  MySQL ODBC connector DriverVer:05.02.0002
  
  ------------------------------------------------------------------------------------------------------
  ODBC DSN
  
  ;
  ; ODBC.ini configuration for MYODBC and MYODBC 3.51 drivers
  ;
  
  [ODBC data sources]
  AAA1 = pilot 5.2.2 MyODBC DSN
  
  [AAA1]
  Driver = /usr/lib64/libmyodbc5w.so
  Description = driver MYODBC DSN 5.52
  SERVER = 10.50.18.89
  USER = tytancc2
  Password = xxxxxx
  Database = radiator
  OPTION = 3
  CHARSET = latin1
  Trace = yes
  Trace file = /tmp/unixodbc.sql.log
  Debug = 1
  Debugfile = /tmp/unixodbc.debug.log
  
  ---------------------------------------------------------------------------------------
  File hs
  # This is an example of initialization file of the agent that contains the HS settings
  # necessary for the database to ODBC gateway
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = AAA1
  #HS_FDS_TRACE_LEVEL = 255
  HS_FDS_TRACE_LEVEL = DEBUG
  #HS_FDS_SHAREABLE_NAME = /usr/lib64/libmyodbc5w.so
  HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so.2
  HS_FDS_SQLLEN_INTERPRETATION = 32
  #HS_LANGUAGE = AMERICAN_AMERICA. AL32UTF8
  #HS_LANGUAGE = AMERICAN_AMERICA. WE8ISO8859P15
  #HS_LANGUAGE = AMERICAN_AMERICA. WE8ISO8859P1
  HS_LANGUAGE = AMERICAN_AMERICA. LATIN1
  HS_FDS_FETCH_ROWS = 1
  #HS_NLS_NCHAR = UCS2
  #HS_OPEN_CURSORS = 10
  
  
  #
  # ODBC specific environment variables
  #
  Set ODBCINI=/u01/oracle/.odbc.ini
  Set ODBCINSTINI=/etc/odbcinst.ini
  
  
  #
  # Required for the non-Oracle system environment variables
  #
  set LD_LIBRARY_PATH = / usr/lib64
  
  
  --------------------------------------------------------------------------------------------
  Trace file
  
  Oracle Corporation - 22:01:40.555 Friday, February 8, 2013
  
  
  Heterogeneous Agent release
  11.2.0.1.0
  
  
  
  
  Oracle Corporation - 22:01:40.549 Friday, February 8, 2013
  
  Version 11.2.0.1.0
  
  Hgogprd entries
  HOSGIP to 'HS_FDS_TRACE_LEVEL' returned 'DEBUG '.
  Hgosdip entries
  default assignment of 50 HS_OPEN_CURSORS
  setting HS_FDS_RECOVERY_ACCOUNT or 'RECOVER '.
  HS_FDS_RECOVERY_PWD layout to the default
  default HS_FDS_TRANSACTION_LOG of HS_TRANSACTION_LOG layout
  HS_IDLE_TIMEOUT layout to the default 0 value
  layout by default HS_FDS_TRANSACTION_ISOLATION of "READ_COMMITTED".
  layout by default «AL32UTF8» HS_NLS_NCHAR
  layout HS_FDS_TIMESTAMP_MAPPING default 'DATE '.
  layout HS_FDS_DATE_MAPPING default 'DATE '.
  layout HS_RPC_FETCH_REBLOCKING failure to 'ON '.
  HOSGIP returned the value of '1' for HS_FDS_FETCH_ROWS
  parameter HS_FDS_RESULTSET_SUPPORT default 'FALSE '.
  parameter HS_FDS_RSET_RETURN_ROWCOUNT default 'FALSE '.
  parameter HS_FDS_PROC_IS_FUNC default 'FALSE '.
  parameter HS_FDS_CHARACTER_SEMANTICS default 'FALSE '.
  parameter HS_FDS_MAP_NCHAR if there is no 'TRUE '.
  setting HS_NLS_DATE_FORMAT or 'YYYY-MM-DD HH24:MI:SS ".
  parameter HS_FDS_REPORT_REAL_AS_DOUBLE default 'FALSE '.
  HS_LONG_PIECE_TRANSFER_SIZE layout without "65536".
  parameter HS_SQL_HANDLE_STMT_REUSE default 'FALSE '.
  parameter HS_FDS_QUERY_DRIVER if there is no 'TRUE '.
  parameter HS_FDS_SUPPORT_STATISTICS default 'FALSE '.
  The HS_FDS_QUOTE_IDENTIFIER parameter is not defined
  setting in HS_KEEP_REMOTE_COLUMN_SIZE if 'OFF '.
  parameter HS_FDS_GRAPHIC_TO_MBCS default 'FALSE '.
  parameter HS_FDS_MBCS_TO_GRAPHIC default 'FALSE '.
  HOSGIP returned the value "32" for HS_FDS_SQLLEN_INTERPRETATION
  HS_CALL_NAME_ISP layout "gtw$: SQLTables; GTW$: SQLColumns. GTW$: SQLPrimaryKeys. GTW$: SQLForeignKeys. GTW$: SQLProcedures. GTW$: SQLStatistics; "gtw$: SQLGetInfo.
  parameter HS_FDS_DELAYED_OPEN if there is no 'TRUE '.
  HS_FDS_WORKAROUNDS layout by default "0".
  Release of hgosdip, rc = 0
  ORACLE_SID is "AAA1.
  Product information:
  Port RLS / Upd:1 / 0 PrdStat:0
  Agent: Oracle Database Gateway for ODBC
  : Installation
  Class: ODBC, ClassVsn:11.2.0.1.0_0008, Instance: AAA1
  Release of hgogprd, rc = 0
  Hgoinit entries
  HOCXU_COMP_CSET = 1
  HOCXU_DRV_CSET = 31
  HOCXU_DRV_NCHAR = 873
  HOCXU_DB_CSET = 31
  HOCXU_SEM_VER = 102000
  Entry hgolofn to 2013/02/08-22: 01:40
  HOSGIP to 'HS_FDS_SHAREABLE_NAME' returned ' / usr/lib64/libodbc.so.2 '.
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a08f61
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a090e5
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a09c18
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a0b6dc
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a17bc4
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a182e8
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a1bc40
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a1dad8
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a1e6dc
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a20bae
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a20bd0
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a22f44
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a276d4
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a27b90
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2a4a4
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2b574
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2b99c
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2e65c
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2ecd0
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a31db8
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a31ac0
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a0c47c
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a0e884
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a14943
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a1714a
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a19327
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a1d2ce
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a1f648
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a210c7
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a23990
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2414c
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a25d26
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a26cc0
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a288a8
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a28c67
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a29e88
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2c51e
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2ccfa
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2d5c0
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2de92
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a2f088
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a33fa4
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a315fe
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a36de2
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Entry hgolofns to 2013/02/08-22: 01:40
  symbol_peflctx = 0x31a380ec
  hoaerr:0
  Output hgolofns to 2013/02/08-22: 01:40
  Release of hgolofn, rc = 0 to 2013/02/08-22: 01:40
  HOSGIP to 'HS_OPEN_CURSORS' returned '50 '.
  HOSGIP to 'HS_FDS_FETCH_ROWS' returned '1 '.
  HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536".
  HOSGIP to 'HS_NLS_NUMERIC_CHARACTER' returned '. "
  HOSGIP to 'HS_KEEP_REMOTE_COLUMN_SIZE' returned 'OFF '.
  HOSGIP for "HS_FDS_DELAYED_OPEN" returns 'TRUE '.
  HOSGIP to 'HS_FDS_WORKAROUNDS' returned '0 '.
  HOSGIP to 'HS_FDS_MBCS_TO_GRAPHIC' returned 'FALSE '.
  HOSGIP to 'HS_FDS_GRAPHIC_TO_MBCS' returned 'FALSE '.
  treat_SQLLEN_as_compiled = 0
  Release of hgoinit, rc = 0 to 2013/02/08-22: 01:40
  Entry hgolgon to 2013/02/08-22: 01:40
  name: tytancc2, reco:0, tflag:0
  Entry hgosuec to 2013/02/08-22: 01:40
  Release of hgosuec, rc = 0 to 2013/02/08-22: 01:40
  HOSGIP to 'HS_FDS_RECOVERY_ACCOUNT' returned 'RECOVER '.
  HOSGIP for "HS_FDS_TRANSACTION_LOG" returns "HS_TRANSACTION_LOG".
  HOSGIP to 'HS_FDS_TIMESTAMP_MAPPING' returned 'DATE '.
  HOSGIP to 'HS_FDS_DATE_MAPPING' returned 'DATE '.
  HOSGIP to 'HS_FDS_CHARACTER_SEMANTICS' returned 'FALSE '.
  HOSGIP for "HS_FDS_MAP_NCHAR" returns 'TRUE '.
  HOSGIP to 'HS_FDS_RESULTSET_SUPPORT' returned 'FALSE '.
  HOSGIP to 'HS_FDS_RSET_RETURN_ROWCOUNT' returned 'FALSE '.
  HOSGIP to 'HS_FDS_PROC_IS_FUNC' returned 'FALSE '.
  HOSGIP to 'HS_FDS_REPORT_REAL_AS_DOUBLE' returned 'FALSE '.
  using tytancc2 as the default value to "HS_FDS_DEFAULT_OWNER".
  HOSGIP to 'HS_SQL_HANDLE_STMT_REUSE' returned 'FALSE '.
  Entry hgocont to 2013/02/08-22: 01:40
  HS_FDS_CONNECT_INFO = "AAA1.
  RC =-1 of HOSGIP for 'HS_FDS_CONNECT_STRING '.
  Entry hgogenconstr to 2013/02/08-22: 01:40
  DSN:AAA1, name: tytancc2
  OPTN:
  Entry hgocip to 2013/02/08-22: 01:40
  DSN:AAA1
  Release of hgocip, rc = 0 to 2013/02/08-22: 01:40
  Release of hgogenconstr, rc = 0 to 2013/02/08-22: 01:40
  Entry hgolosf to 2013/02/08-22: 01:45
  Release of hgolosf, rc = 0 to 2013/02/08-22: 01:45
  DriverName:libmyodbc5w.so, DriverVer:05.02.0002
  Name of DBMS: MySQL, DBMS Version: 5.1.66 - community-newspaper
  Release of hgocont, rc = 0 to 2013/02/08-22: 01:45
  SQLGetInfo Returns Y for SQL_CATALOG_NAME
  SQLGetInfo returns 192 for SQL_MAX_CATALOG_NAME_LEN
  Release of hgolgon, rc = 0 to 2013/02/08-22: 01:45
  Entry hgoulcp to 2013/02/08-22: 01:45
  Entry hgowlst to 2013/02/08-22: 01:45
  Release of hgowlst, rc = 0 to 2013/02/08-22: 01:45
  SQLGetInfo returns 0x0 for SQL_OWNER_USAGE
  Able TXN: isolation 3, Option: 0xf
  SQLGetInfo returns 0 for SQL_MAX_SCHEMA_NAME_LEN
  SQLGetInfo returns 192 for SQL_MAX_TABLE_NAME_LEN
  SQLGetInfo returns 192 for SQL_MAX_PROCEDURE_NAME_LEN
  SQLGetInfo returns (0 x 60) for SQL_IDENTIFIER_QUOTE_CHAR
  SQLGetInfo Returns Y for SQL_COLUMN_ALIAS
  16 functions for instance will be uploaded
  context: 0x00000000, capno:1964, add info: 0
  context: 0x00000000, capno:1989, add info: 0
  context: 0x0001ffff, capno:1991, add info: 0
  «"" context: 0x0001ffff, capno:1992, info-add: 1, translation:»»»
  context: 0x00000000, capno:3042, add info: 0, translation: "42".
  context: 0x00000000, capno:3047, add info: 0, translation: "57."
  context: 0x00000000, capno:3049, add info: 0, translation: "59".
  context: 0x00000000, capno:3050, add info: 0, translation: "60".
  context: 0x00000000, capno:3066, add info: 0
  context: 0x00000000, capno:3067, add info: 0
  context: 0x00000000, capno:3068, add info: 0
  context: 0x00000000, capno:3069, add info: 0
  capno:3500, context: 0x00000001, add info: 91, translation: "42".
  capno:3501, context: 0x00000001, add info: 93, translation: "57."
  capno:3502, context: 0x00000001, add info: 107, translation: "59".
  capno:3503, context: 0x00000001, add info: 110, translation: "60".
  Release of hgoulcp, rc = 0 to 2013/02/08-22: 01:45
  Entry hgouldt to 2013/02/08-22: 01:45
  NO translation of DD for instance have been downloaded
  Release of hgouldt, rc = 0 to 2013/02/08-22: 01:45
  Entry hgobegn to 2013/02/08-22: 01:45
  tflag:0, original: 1
  Hoi:0x9671a48, ttid (len 26) is...
  00: 54595441 4E2E6438 32323564 62642E32 [TYTAN.d8225dbd.2]
  10: 3433 33313031 [9.7.310143] 392E372E
  tbid (len 10) is...
  0: 1-000700 7FBB0400 0104 [...]
  Release of hgobegn, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopdsc to 2013/02/08-22: 01:45
  Describing the procedure SUBSCRIBERS
  Output hoada
  hgopdsc, line 1406: NO hoada to print
  Release of hgopdsc, rc = 942 to 2013/02/08-22: 01:45
  Entry hgodtab to 2013/02/08-22: 01:45
  number: 1
  Table: SUBSCRIBERS
  Allocate hoada [0] @ 0x3a23590
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:1 (MSISDN): dtype:1 (CHAR), prc / scl:8 / 0, nullbl:0, byte: 8, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:2 (IMSI): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:0, byte: 8, sign: 1, radix: 10
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:3 (ICC): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:0, byte: 8, sign: 1, radix: 10
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:4 (CHECKATTR): dtype:1 (CHAR), prc / scl:200 / 0, nullbl:1, byte: 200, sign: 1, radix: 10
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:5 (REPLYATTR): dtype:1 (CHAR), prc / scl:200 / 0, nullbl:1, byte: 200, sign: 1, radix: 10
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:6 (TIMELEFT): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:1, byte: 200, sign: 1, radix: 10
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:7 (ELIMINATED): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:1, byte: 200, sign: 1, radix: 10
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:8 (Suspended): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:1, byte: 200, sign: 1, radix: 10
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  The hoada for SUBSCRIBERS table follows...
  hgodtab, line 876: print hoada @ 0x3a23590
  MAX: 8, REAL: 8, BRC:1, WHT = 6 (TABLE_DESCRIBE)
  hoadaMOD bit-values found (0x200: TREAT_AS_CHAR, 0x20: NEGATIVE_HOADADTY)
  DTY NULL-OK LEN MAXBUFLEN PR/SC CSE IND MOD NAME
  1 TANK N 8 8 0 / 0 0 0 200 MSISDN
  -5 BIGINT 8 8 N 0 / 0 0 0 20 IMSI
  -5 BIGINT 8 8 N 0 / 0 0 0 20 ICC
  1 CHAR Y 200 200 0 / 0 0 0 200 CHECKATTR
  1 CHAR Y 200 200 0 / 0 0 0 200 REPLYATTR
  -5 BIGINT Y 8 8 0 / 0 0 0 20 TIMELEFT
  -5 BIGINT Y 8 8 0 / 0 0 0 20 ELIMINATED
  -5 BIGINT Y 8 8 0 / 0 0 0 20 SUSPENDED
  Release of hgodtab, rc = 0 to 2013/02/08-22: 01:45
  Entry hgodafr, cursor IDs 0 to 2013/02/08-22: 01:45
  Free Hoada @ 0x3a23590
  Release of hgodafr, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopars, id of cursor 1 to 2013/02/08-22: 01:45
  type: 0
  Text SQL hgopars, id = 1, len = 134...
  45 00: 53454 C 43542041 53495344 312E604D [SELECT A1.'MSISD]
  10: 4E602C41 4 534960 2C41312E 312E6049 [NO, A1.] "IMSI', A1.]
  20: 60494343 602C 4131 2E604348 45434B 41 ['ICC', A1' COACHA]
  30: 54545260 60524550 4 594154 2C41312E [TTR ', A1' REPLYAT]
  40: 5452602 C 54494 45 4 454654 41312E60 [TR ', A1' TIMELEFT]
  50: 602C 4131 2E60454C 494D494E 41544544 [', A1.'] ELIMINATED]
  60: 602C 4131 2E605355 5350454E 44454460 [', 'SUSPENDED' A1.]
  70: 4 206053 55425343 52494245 2046524F [A ' SUBSCRIBE]
  80: 52536020 4131 [RS A1]
  Release of hgopars, rc = 0 to 2013/02/08-22: 01:45
  Entry hgoopen, id of cursor 1 to 2013/02/08-22: 01:45
  hgoopen, line 86: NO hoada to print
  Delayed open until the first fetch.
  Release of hgoopen, rc = 0 to 2013/02/08-22: 01:45
  Entry hgodscr, id of cursor 1 to 2013/02/08-22: 01:45
  Allocate hoada @ 0x3a23538
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:1 (MSISDN): dtype:1 (CHAR), prc / scl:8 / 0, nullbl:0, byte: 8, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:2 (IMSI): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:0, byte: 8, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:3 (ICC): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:0, byte: 8, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:4 (CHECKATTR): dtype:1 (CHAR), prc / scl:200 / 0, nullbl:1, byte: 200, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:5 (REPLYATTR): dtype:1 (CHAR), prc / scl:200 / 0, nullbl:1, byte: 200, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:6 (TIMELEFT): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:1, byte: 200, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:7 (ELIMINATED): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:1, byte: 200, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  Entry hgopcda to 2013/02/08-22: 01:45
  Column:8 (Suspended): dtype:-5 (BIGINT), prc / scl:19 / 0, nullbl:1, byte: 200, sign: 1, radix: 0
  Release of hgopcda, rc = 0 to 2013/02/08-22: 01:45
  hgodscr, line 880: print hoada @ 0x3a23538
  MAX: 8, REAL: 8, BRC:1, WHT = 5 (SELECT_LIST)
  hoadaMOD bit-values found (0x200: TREAT_AS_CHAR, 0x20: NEGATIVE_HOADADTY)
  DTY NULL-OK LEN MAXBUFLEN PR/SC CSE IND MOD NAME
  1 TANK N 8 8 0 / 0 0 0 200 MSISDN
  -5 BIGINT 8 8 N 0 / 0 0 0 20 IMSI
  -5 BIGINT 8 8 N 0 / 0 0 0 20 ICC
  1 CHAR Y 200 200 0 / 0 0 0 200 CHECKATTR
  1 CHAR Y 200 200 0 / 0 0 0 200 REPLYATTR
  -5 BIGINT Y 8 8 0 / 0 0 0 20 TIMELEFT
  -5 BIGINT Y 8 8 0 / 0 0 0 20 ELIMINATED
  -5 BIGINT Y 8 8 0 / 0 0 0 20 SUSPENDED
  Release of hgodscr, rc = 0 to 2013/02/08-22: 01:45
  Entry hgoclse, id of cursor 1 to 2013/02/08-22: 01:46
  Release of hgoclse, rc = 0 to 2013/02/08-22: 01:46
  Entry hgodafr, id of cursor 1 to 2013/02/08-22: 01:46
  Free Hoada @ 0x3a23538
  Release of hgodafr, rc = 0 to 2013/02/08-22: 01:46
  Entry hgopars, id of cursor 1 to 2013/02/08-22: 01:46
  type: 0
  Text SQL hgopars, id = 1, len = 56...
  45 00: 44454 C 54452046 60535542 524F4D20 [DELETE OF ' SUB]
  10: 53435249 42455253 60205748 45524520 [OF THE TRUSQUINS WHERE]
  20:60535542 53435249 602E604D 42455253 ["SUBSCRIBERS". AM]
  30: 53495344 4E603D3F [SISDN'=?]
  Release of hgopars, rc = 0 to 2013/02/08-22: 01:46
  Entry hgoexec, id of cursor 1 to 2013/02/08-22: 01:46
  octype = 3 (REMOVE)
  hgoexec, line 108: print hoada @ 0x3a23538
  MAX: 1, SIZE: 1, BRC:1, WHT = 3 (BIND_LIST)
  hoadaMOD bit-values found (0x200: TREAT_AS_CHAR)
  DTY NULL-OK LEN MAXBUFLEN PR/SC CSE IND MOD NAME
  1 TANK N 8 0 0 / 0 31 0 200?
  Entry hgoprbv to 2013/02/08-22: 01:46
  hgoprbv, line 145: print hoada @ 0x3a23538
  MAX: 1, SIZE: 1, BRC:1, WHT = 3 (BIND_LIST)
  hoadaMOD bit-values found (0x200: TREAT_AS_CHAR)
  DTY NULL-OK LEN MAXBUFLEN PR/SC CSE IND MOD NAME
  1 TANK N 8 0 0 / 0 31 0 200?
  Release of hgoprbv, rc = 0 to 2013/02/08-22: 01:46

  Could you please put the table in the MySQL table definition is defined in the MySQL database and the way she is described using the database link (desc 'SUBSCRIBERS"@AAA1)
  What happens when you comment the gateway init parameter:
  HS_FDS_SQLLEN_INTERPRETATION = 32?

  Thank you
  Klaus

  Published by: kgronau on February 11, 2013 07:37

  Successfully tested the DG4ODBC 11.2.0.3 by the definition of a table in MySQL:
  drop table CUSTOMERS;
  create table CUSTOMERS (MSISDN char (8), numeric (28.0) IMSI2, ICC2 numeric (28.0), NTC numeric (28.0));
  insert into CUSTOMERS values (610-0850', 8950167090300132451, 702670161017765, NULL);

  and by using this code:
  SQL > select count (*) from 'SUBSCRIBERS"@MYSQL_DG4ODBC_EMGTW_1123_DB;

  COUNT (*)
  ----------
  1

  SQL > declare
  2
  3 MSISDN2 tank (8);
  4 IMSI2 number (28.0);
  5 ICC2 number (28.0);
  6 NTC number (28.0);
  7
  Begin 8

  9 10 MSISDN2: = 610-0850';
  11 IMSI2: = 8950167090300132451;
  12 ICC2: = 702670161017765;
  13
  14 remove from 'SUBSCRIBERS"@MYSQL_DG4ODBC_EMGTW_1123_DB where"MSISDN"= MSISDN2;
  15 ' ICC' = ICC2 or "IMSI" is IMSI2;.
  16
  End 17;
  18.

  PL/SQL procedure successfully completed.

  SQL > select count (*) from 'SUBSCRIBERS"@MYSQL_DG4ODBC_EMGTW_1123_DB;

  COUNT (*)
  ----------
  0

  Published by: kgronau on February 11, 2013 07:51

  Also successfully tested using DG4ODBC Oracle 11.2.0.1 database and 10.2.0.5

• AP541N deletes all customers

  As I posted at the other thread AP541N on performance degradation, mine did a strange client disconnect last week. It fell by customers all authenticated, but they all thought they were still connected. A quick turn of the wireless card on the laptop would reset the computer on the AP.

  It's the same even today.

  The device information and configuration:

  Device: AP541N

  H/W: V01

  S/W: 1.9.1

  Wireless: Channel 11, the key refresh: 0, TKIP, WPA Personal

  Displays all clients who authenticate earlier in the day.

  Hours later, I get a rash of:

  June 21 at 10:30:43 info hostapd wireless with MAC address client XX had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:cc client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:bb client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:aa client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:zz client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:yy client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address client XX had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:cc client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:bb client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:aa client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:zz client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address xx:xx:xx:xx:xx:yy client had a failure of authentication.
  June 21 at 10:30:13 info hostapd wireless with MAC address client XX had a failure of authentication.

  Followed by:

  June 21 at 10:30:43 info hostapd wlan0: xx:xx:xx:xx:xx:cc STA IEEE 802.11: désauthentifié due to inactivity
  June 21 at 10:30:43 info hostapd customer wireless with MAC address 00: 1B: 77:94:dd:89 had a failure of authentication.
  June 21 at 10:30:43 info hostapd wlan0: xx:xx:xx:xx:xx:bb STA IEEE 802.11: désauthentifié due to inactivity
  June 21 at 10:30:43 info hostapd customer wireless with MAC address 00:18: of: 4 c: fd:26 failed to authenticate.
  June 21 at 10:30:43 info hostapd wlan0: xx:xx:xx:xx:xx:aa STA IEEE 802.11: désauthentifié due to inactivity
  June 21 at 10:30:43 info hostapd wireless with MAC address 00:13:e8:f9:c9:f5 client had a failure of authentication.
  June 21 at 10:30:43 info hostapd wlan0: xx:xx:xx:xx:xx:zz STA IEEE 802.11: désauthentifié due to inactivity
  June 21 at 10:30:43 info hostapd customer wireless with MAC address 00:21:5 d: 36:3e:c4 had a failure of authentication.
  June 21 at 10:30:43 info hostapd wlan0: xx:xx:xx:xx:xx:yy STA IEEE 802.11: désauthentifié due to inactivity
  June 21 at 10:30:43 info hostapd wireless with MAC address 00:16:6f:10:fb:9f client had a failure of authentication.
  June 21 at 10:30:43 info hostapd wlan0: XX STA IEEE 802.11: désauthentifié due to inactivity

  Cycling the switch wireless on my laptop, one obtains:

  June 21 at 10:33:41 info hostapd wlan0: XX STA WPA: key exchange group completed
  June 21 at 10:33:41 info hostapd wireless with MAC address client XX has been properly authenticated.
  June 21 at 10:33:41 info hostapd wlan0: XX STA WPA: pairwise key exchange completed (WPAv1)
  June 21 at 10:33:41 info hostapd wlan0: IEEE 802.11 STA XX associated BSSID xx:xx:xx:xx:xx:dd
  June 21 at 10:33:41 info hostapd wlan0: IEEE 802.11 Association request for XX BSSID xx:xx:xx:xx:xx:dd SSID MYAPSSID
  June 21 at 10:33:39 info hostapd wlan0: IEEE 802.11 STA XX deauthed xx:xx:xx:xx:xx:dd BSSID 4 reason

  I changed the channel from 11 to 9 and started having this happen like crazy. I now have 3. It was strange, like last week, this has happened once early in the week and was fine for the rest. Same thing this week to the extent that happens at the beginning of the week...

  Thank you, Chris. I have notified engineering teams. Your feedback will be returned help

  We a permanent solution.

  Stephanie

• How can I check customers get updates from the caching Service?

  I've just set up a server 10.11 with Server.app version 5.0.15 to act as a provisioning server caching to provide updates to the clients Mac (no iOS device).

  I see that he has downloaded updates the Stats section when I chose bytes served in the drop down menu.

  I want to check that it works and that clients receive the updates of this sever when at the office.

  I did a lot of research but have not found anything definitive. I've seen suggestions may be looking at the Library/Server/Caching/Logs/Debug.log, but nothing in it can tell me whether or not a customer received an update of the caching Service. It is suggested in the Server Essentials of PeachPit book looking at Activity Monitor to check the packet network and instrumental, but which shows that the server successfully contacted Apple and checked the IP address.

  I need to know and to verify that this Service of caching works effectively by updates provided to customers on our network. Does anyone know how to do this?

  Thanks in advance.

  EDIT: I just checked the server again and downloaded only 226 MB of data. I created this yesterday afternoon. Shouldn't be much more data?

  https://help.Apple.com/ServerApp/Mac/5.0/?lang=en#/apd5E1AD52E-012B-4A41-8F21-8e 9EDA56583ALog

  LogLevel-> verbose
  I get enough information about the activities

• upgrade to connected hp eprint - can't drag and drop apps to organize them the way I did before!

  I upgraded to connected HP eprint today.  Now it wont let me not to the eprint site (and, Yes, I would not have gone back if something did not work to connected hp).

  I could drag and drop placement of my apps to have as I would like on the touchscreen to eprint printer.   However, I can't do drag or drop whatever it is connected HP, and I see no help on the management of the investment of the apps on your printer.

  How is that possible?  It was easy before - printer just drag-and - drop and website updated.  I have an officejet 7610.

  Thanks in advance!

  Thanks for trying, but your answer is incorrect, according to an email I received today from HP connected:

  "I have reviewed your email. I understand you have questions related to the reorganization of the order of apps on the printer. I know this can be frustrating, and I want you to know you are certainly valuable for us and I want to do everything possible to ensure your complete satisfaction. The following information should provide the answers you need:

  (1) Unfortunately when HP has launched the new website (www.hpconnected.com) they do not include a method to rearrange applications on the printer. They can include this feature in a future update, but as this time it is not available.

  (2) If you did upgrade to connected HP eprintcenter, you do have the option of return. EPrintCenter is being be eliminated and retune to the old site unfortunately is not possible. »

  I hope that < < S-O-O-N > > HP fixed this new Web site - it's crazy take-out all controls like that from their customers and not embellish their or at least let them be.

  I can take this OJ 7610 back for a new brother 11 x 17 all-in-in-one - they look nice )

• Apple TV remote control glass broke when dropped

  Recently, my husband bought our second Apple TV, an upgrade of the first edition, we have purchased four years ago. We are customers of long-time Apple and have always possessed several Apple products. We both like the updates to the new Apple TV with the exception of the remote control. There are a few things we don't like about the design. First, our remote fell of the couch on a ceramic tile floor and broken glass. Accidents happen, and I dare say that it is going to be a lot of unhappy customers when they abandon their distance and it crashes. I will say that if the remote was dropped on the carpet he probably have come out unscathed. The remote control fell to the back of the sofa at a height of about three feet. I think that the remote control must be able to survive a fall like that or maybe Apple could consider designing a case or neoprene as the channel to the remote control. The other complaints we have are things that we have learned to adapt to. Remote ginning glass is well issue and because Apple products are on the pricey side (I had to replace a laptop charge cord twice - $80 a pop - compliments of our puppy) we have not yet checked the cost of replacement.

  Yes. It is a delicate user in my opinion not the real world tested. There are other posts on the topic, and I saw the new cases that occurred just as we have for our other handheld devices.  I think Siri remotes are also about $80...

  I will also mention that the old Apple TV remotes work with the new ATV as well - except Siri.  In fact, I use remote money or my universal remote control harmony more than the included remote control of Siri (I can't find Siri on tvOS it useful - still).

• Trek PR2000 DHCP problems, maintains a drop connections, perhaps workaround

  Hello!

  A few days ago, I bought the new Netgear Trek PR2000 mobile wireless router. Goal was to have a point of contact for all my devices while traveling and be able to connect to a hotspot or wifi in the hotel.

  Configuration has been fine and I was able to connect to my home network in wireless client mode. My router is a TP-Link TL-WR1043ND running OpenWrt 12.09 Attitude Adjustment, wifi with WPA2-AES, DHCP service.

  The Trek has been able to connect, and the whole system was running. Unfortunately, I realized, that the Trek has kept falling connections every 3-5 minutes with the genius of Netgear annoying pop up and try to re-establish a connection. Sometimes it worked, then the Trek cannot connect at all.

  Since I read that OpenWrt Attitude Adjustment can be problems with some wifi connections, I have improved my WR1043ND barrier breaker. The connection drops continued, including OSX almost every minute. The WR1043ND showed various DHCP-wifi-a failed-to-recognize-errors and in his diary.

  After trying all possible setting changes in the Trek-config (and shortly before returning the Trek), I found something as a workaround. In the Trek-config, I disabled the DHCP Server for the LAN area and assigned static IP addresses to connecting clients. Well at least so far, it seems to work very well. No more connections, no more boring engineering arise not interrupted and try to reconnect, the system seems to work.

  But for now, I'm a little confused as to the reason. In my view, the Trek connects to a hotspot and gets an IP address assigned by DHCP from hotspot. Then the Trek uses NAT to connect the clients attached to the internet. Actually the IP addresses of the DHCP assigned by the Trek to customers connected to the LAN area shouldn't affect hotspot NETWORK settings at all. Normally the IP address and private DNS settings are just for private clients LAN, aren't they? If I'm not completely wrong in my assumption, there could be a bug in the DHCP server on the hike or the way how dynamic the client LAN IPs are handled. From the point where I changed to static IP in the LAN client, there was no error message in the log of the WR1043ND.

  Strange thing... Maybe someone could correct me if my assumptions are wrong? BTW, I use the stock PR2000 Trek firmware (which is something like 1.0.0.9) since there is no other is available.

  Thank you.

  @hksteve I wish to inform you that the fix is now available from our download page.

  Feel free to update your firmware and provide feedback.

  Thank you!

• Why don't I do drag and drop photos in real size of more attachments in the new Windows Live Mail?

  I am a real estate photographer, and one of the things I have to do on a regular basis is to send pictures to people. They need these photos as attachments. I downloaded the new Windows Live Mail and I noticed that I can't not simply 'Drag and Drop' photo attachments. Instead, Windows Live mail has resized the picture down and put a boarder around it. I went through the settings and I don't see anywhere I can click to the program, what he had ALWAYS done before, that was simple. Now to send a file, I have to click on the "Attachment" button, navigate my external drives and find the file that I send. I have hundreds of customers and too many files having to negotiate through. I prefer to be able to slide and have it set out in its full dimension, as I always did before in previous versions of WLM and Outlook Express.

  I ALSO can not simply with the right button on a photo, select "send to" and then 'recipient' and attach files there either. Now, it uploads to the Skydrive. My customers don't want it. They do not want additional steps. They just want an email with attached files.

  Please tell me what I'm doing wrong. I can't imagine that you got rid of those simpler features. Please don't tell me you didn't get rid of the simple ability to re size and attach pictures, did you?

  Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15

• Cluster AP541N of problems with the sticky homelessness and slow connections

  I have a client with about 20 users with wireless and a cluster of 4 AP541N on their activities. They have an app that they get on a cloud that connects to a remote desktop in the same sense that Citrix. We have a problem of connectivity to the wireless network and also some speed issues. I went when they have problems and tracked down the AP where is the MAC machine and often it is not the closest access point to the user. Many times, it is an access point with 2 other AP in the same cluster between him and the client computer.

  Concern for speed appears on different machines, not necessarily the same as those with sticky homelessness issue. Some of them have a wireless n card, but are only connect to g. I don't know if it's related to that, but I also have machines 100% or close to it, the signal strength and they dive into the region of 15Mbps. The LAN is fine, other wireless devices are fine, but these intermittent problems happen to some users. We have updated the firmware for the wireless card, and generally, this does not resolve the issue.

  The cluster uses automatic management of channel and in order to cut down on the thorny issue of roaming my network engineer value emission high instead of full power to limit overlap.

  Any suggestions about where to go next with troubleshooting? These users entered a wireless network that was not clustered with retail store bought routers Cisco wireless and had similar or better performance, so they ask why they're not getting a better experience with the equipment upgraded. Thank you all

  My name is Eric Moyers. I am an engineer in the Small Business Support Center.

  I'm sorry to hear that you are experiencing this issue.

  The AP541N does not support roaming. Yes, I know that in the Administrator's Guide, he mentions one seamless experience. It is actually mentioned in the WDS section and not Clustering. However is not roaming as you would find with a wireless network with a wireless LAN controller.

  Within the Cisco Small Business equipment and any other provider, for networks that do not have a controller wireless LAN to a wireless client to move from one access point to another that the first signal would actually have to drop to get the next strongest signal to authenticate and connect.

  With the AP541N, there is an option to activate prior authentication if you use Radius Authentication. This assistance in faster authentication but is still not roaming and would require a signal switch to the next strongest signal.

  Have you done a scan wireless in your area? I use a tool called Analytics of a Wi - Fi connection, the best thing is it of free. This can help determine which static channel is best for your environment. One of the Con to use an automatic channel is that when the AP is changing channels, it will pass some clients are currently connected and won't allow all connections until a new string is found and the beginning of the device transmitting again.

  If you want help to determine the best configuration for your situation, lease call our support center and prosecute so that one of our engineers can work directly with you. Once you have a file number, all engineers know who I am and can reach assistance me if needed.

  Eric Moyers
  .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
  Wireless and monitoring subject matter Expert

  Please note the useful messages and let know when your question has been answered.

• Access points dropping from top to bottom

  I have anywhere from 5 to 20 points of access drop goes up and down all day on a total of about 200. I try currently to cross and understand why we our access points are conducting many issues and how I might be able to solve.

  One of the newspapers I see often is:

  AP "exp - p13,' interface '802. ' 11A ' controller ' 10.2.192.25 '. String passed to ' 44 ""60"due to 'None '. Energy interference before update is ' 0 'and after update is ' 0'. Noise before update is ' 0 'and after that update is ' 0'. Interference before update is ' 0 'and after update is ' 0'.

  Is any way to determine what the cause of this?

  The controller firmware: 4.2.130.0.

  Model AP-AIR-LAP1242AG-A-K9

  IOS Version 12.4 (10B) JA4

  Sounds as if it was just the Radio Resource Management (RRM) on the controller. You can disable this if she is down to customers. Go to the wireless tab, look on the left and click on the 802. 11A / n or 802.11b/g/n dropdown. Then click on the drop down RRM, click Auto RF.

  My advice is to change the algorithms of subpoena power and channel to "On Demand. You can call them to the need to maintain an optimal network. By default, it automatically calls the update every 10 minutes.

  Give it a try and see if it helps. If this isn't the case, we can explore more.

• Effects of the performance of 802. 11B clients on customers 802.11 g

  Can someone tell me what effect in what concerns the speed a 802. 11 customer b would have on a customer 802.11 g. Especially on a network using AIR-LAP1242AG-E-K9 access points.

  I've read elsewhere that when you use the older client 11 b AP will be degregate performance for 11g clients. Is this always the case for the AIR-LAP1242AG-E-K9?

  Does anyone have a stat for this?

  Dylan

  Hi Dylan,.

  Yes, customers of 'B' will be stil have a significant effect to take a look at this clip.

  When 802. 11B clients are * associated with an access point 802.11 g, the access point will start a protection mechanism call Request to Send/Clear to send (RTS/CTS). Originally a mechanism to address the "hidden node problem" (a condition where two clients can maintain a connection to an access point, but due to the distance can not hear the other), RTS/CTS adds a degree of determinism to the other network to multiple access. When RTS/CTS is invoked, the clients must first request access in the middle of the access point with an RTS message. Until the access point replies to the client with a message from the CTS, the client will refrain from access to the average and transmitting its data packets. When received by customers requiring abstain to access the average, other that the one who sent the original RTS, CTS control is interpreted as a command "do not send". You can see that this mechanism will prevent 802. 11 customers to transmit simultaneously with a 802.11 client b g, which avoids collisions this drop in flow due to attempts. You can see that this additional RTS/CTS process adds a significant amount of protocol overhead, which also translates into a reduction in network throughput.

  In addition to the RTS/CTS, the 802.11 g standard adds another important condition to enable 802. 11B compatibility. Where a collision occurs due to simultaneous transmissions (the probability that is greatly reduced due to the RTS/CTS), client devices 'reverse' the network for a random period before attempting to access the average again.

  Note that the increase in throughput for 802.11 g running in mixed mode is relatively modest compared with the 802. "11b and is a fraction of the flow provided by 802.11 g, when he supported not customers not inherited.

  It is well described in this great doc;

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_white_paper09186a00801d61a3.shtml

  I hope this helps a bit!

  Rob

• Drag and Drop VMware Service dashboard

  Hello

  We try to create a VMware dashboard from a service.  We have three VMware data centre and we want to see one of them on a custom drag and drop that will be created from a service dashboard (we have created several of these dashboards for other objects of topology such as SQL Server, Exchange and standard hosts).

  We created the service, but when we try to add DataCentre_1 to it, it does not display the server in the data center.  We added service-specific components, selecting a search for 'All models', enlargement VMware model. virtualCenters.  None of the items selected under which show the VM customers.  We tried VMWVirtualCenter, VMWDatacenterCollection and VMWDatacenter.

  No matter which one is selected, when we try to create a table in the dashboard by dragging Services | All Services | | Guests in all, we still have a message "No data to display" in the preview window.

  Can someone please tell us where get you the guest list for the VMware data centre?

  Thank you

  Brian

  Hi Brian,.

  I think that the best way to do this is to define a Service that contains all ESX hosts in the target datacenter.

  You can do this by defining a Service then fill that Service with 'a rule to include a group of components', also known as a FSMDynamicManagedComponent. The definition of this rule begins with the root query "ESX hosts", to which we add a rule as a condition:

  virtualCenter.name like '% alvvmml01 '.

  Your Service will then contain all of the corresponding ESX hosts and you can then drag and drop the ESX host since the set service in your dashboard or report.

  Your first attempt did not work because the addition of things like VMWVirtualCenter, VMWDatacenterCollection or VMWDatacenter in the Service adds these items for the Service, but not the ESX hosts contained in these articles. /Hosts is also the list of physical or virtual host objects, not the ESX host objects you are looking for.

  Kind regards

  Brian Wheeldon

• How to create drop down menus ' if/and/then.

  I'm building a website for a transport service company and I was wondering how to create a function to display the prices based on the two sites chosen by the customer in a menu drop-down. Basically, it would look like this:

  (departure) (to get) [cost]

  The idea would be to have customers select two locations (departure and arrival) and then based on these two sites, the cost would be displayed. Is there a way to do this?

  Which would not be supported by Muse directly. You create a widget customized for this by using Javascript.