Photosmart Plus B209 wireless connection not available

Similar Questions

• Wireless connection not available in CP?

  Hello

  I apologize in advance for asking, but I can't find an answer in the knowledge base.

  I did a clean install on a new HD in Win7x64. The old HD was Win7x32, and I have been trading in and out of the connector on the drive C: to perform troubleshooting and other tasks. The old HD OS connects to the internet via my router wireless without fault (that is, there is no hardware problem). I can also open the tab "set up a new connection" / "connect to the internet" and find choices both broadband and wireless. However, in the new installation of the OS, I find that the option high speed. I have updated the adapter wireless for the same driver & rebooted without change. What else might work?

  Solution:

  There is no wireless adapters installed - only wireless device controller. After downloading & installation original owner Lenovo WLAN adapt, it worked. No idea why Win7x64 includes not an adapter, what with thousands of functions, programs and updates - appears as a FAIRLY BASIC ELEMENT, since you can't do any update or troubleshoot offline more. And no clue as to what's missing...: /

• Can not install the software for my HP Photosmart Plus B209 on Windows 8.1

  I could not install the driver/software package downloaded for my HP Photosmart Plus B209 Printer on my new HP laptop w/Windows 8.1. I get an error message that the following file is missing; \AppData\Local\Temp\7zS4D84\Setup\hpzshlaut4.0... I have 3 other computers of the OS windows 7 that I had no problem with the printer using this same download driver/software package. Any help you could offer would be greatly appreciated.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• drvers for HP Photosmart Plus B209

  I was using a HP Photosmart Plus B209 printer for many years without any problems unsolved. I've recently had prints fuzzy and weak.

  I reinstalled the HP using HP software online. Now my Windows 7 computer cannot connect to the printer.

  The drivers do not reinstall. 2 supplement tries to install the drivers on the line failed.

  I think it's my problem now. Please advise me how to install the drivers.

  Thank you, Joe

  I have download the drivers successfully. Then I discovered that the print head was deffective so I'm going to buy a replacement, Photosmart plus 6520. Thank you everyone for your suggestions. Joe

• 564XL cartridges Cyan, Magenta and yellow for Photosmart Plus B209

  Before my shift or I turned off and spends a lot of money for the ink cartridges for our Photosmart Plus B209 printer, can anyone tell me for sure ifXL 564 (cyan, yellow and magenta) color cartridges will be really appropriate in this printer?  I looked at the connectors of the cartridge in the printer and they don't look big enough to take something bigger than 564 regular cartridges I have there now.

  I already made the mistake of buying a combo pack of cartridges with 564 yellow cartridges, Cyan, Magenta and black Photo.  I discovered, after the fact, the 564 Photo Black does not fit into the B209.  So, before you make the same mistake with color cartridges, I was hoping that someone could tell me if the 564XLs of Cyan, yellow and Magenta in fact fits.

  I know the black cartridge 564XL will adapt, but it is obvious because of the cartridge housing is greater.

  Anyone can answer this question reliable?  I would really appreciate it.  I need to order a certain number of cartridges and if color XL cartridges will be adapted, I want to get these.

  564xl color cartridges will fit the Photosmart B209a.  Color xl cartridges are the same physical size as the cartridges 'standards', but are filled with ink more.

• Remote Assistance error: "Easy connect, not available.

  Original title: easy Remote Assistance connect will not work

  I have 2 systems of windows 7 on a local network using Qwest PK5000 modem-router.  Both systems are connected via the home network and share files between them very well and there is only 1 active network.

  If I run the MSRA command on the 64-bit computer and select easily connect using the option "help somebody", the system displays the security code for the other system to use or "invite".

  On the 32-bit machine when I try either options it goes to the "easy connect, not available.  Network Diagnostics has found no problem, but if I try to access the Internet connectivity evaluation tool I can't in the tool.  It says at the bottom "IE6 is required" and nothing happens.   So I don't know if the PK5000 was the Peer Name Resolution Protocol on it or not.  Qwest or Actiontec will not respond to the request.  I guess it's OK if the 64, but the machine would not immediately come with the password to use on the other machine.  The command ipconfig/all look the same on both machines. Furthermore, both systems are (Inspiron 580) and DELL (XPS 420).

  Please give me more advice on this problem.

  Problem solved!

  Downloaded "Teamviewer.exe www.teamviewer.com.  It is a product of superior quality on remote assistance and is free for non-commercial use and it works great both ways. And it allows control over the other system instead of simply consider.

• HP Photosmart plus b209a-metres will not print wireless

  This printer has had me very confused for a long time now.  When I got to the printer, I have had no problem in his wireless installation and be able to print things wireless.  But after that I had to restore my laptop I had a few problems.  I reinstalled and everything seems to work properly.  When I go in the settings of the printer and look at the wireless connection, he tells me that it is connected to my router, also when I look in my networks on my laptop, I see the printer.  But then when I want to print something wireless it tells me in the HP Solution Center that the printer is offline.  This makes absolutely no sense to me at all...

  I don't know what to do, I tried searching on google for 30 minutes for a solution, but I couldn't understand anything.
  Any help is greatly appreciated.

  Thanks in advance,
  Sweyko5

  Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

• OfficeJet Pro 8600 Plus: network capability are not available

  Dear Sirs,

  The Officejet Pro 8600 Plus has already been set for a wireless connection. It was primarily used with the USB port.

  We've tried lately set up the wireless connection, and we couldn't.

  We received the message: network capabilities are not available.

  We could not move forward.

  We tried the factory reset, buit didn't work.

  I appreciate your help to resolve this isse.

  Concerning

  Ibrahim

  Please come back to me @Shahin_ij. I think the printer reset will solve the problem. I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• problems with the HP Photosmart Plus b210a Wireless

  Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
  The printer on the network report says "Success" for each element

  It is the same for the iPhone 4 and iPad 2

  The system is composed of:

  MacBook Pro 13 "with OSX 10.6 update now
  Connected to the Internet router Wavewgate Digicom3G150 with key
  HP Photosmart B210 Pro Aio series with ultimate drivers Apple

  Network:
  D4 HW (MAC) address: 85...
  192 168 123 102 (non-static) IP address
  DHCP configuration
  Authentication: WPA - PSK
  Encryption: Auto (AES / TKIP)

  The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

  Thank you for the help that you can give me

  OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

  Make sure that your OS X is healthy:

  1. download and install OS X Combo Update.
  2. download and install the printer drivers HP from Apple.

  After that, you can reset the printing system once more.

• P036TX Ralink Wireless is not available

  Dear users. I just bought a new HP laptop p036TX, but I can't get wifi to work. I installed all the drivers and updates available to your Web site for this product, but the wifi connection is not available. It is not even appear in the network manager or to the manage devices under network adapters, the only network that is Realtek PCI. So I can connect through the ethernet cable and use internet but I can not use wifi, can't even see my wifi device. Not sure if I need to activate the wifi somehow because on my keyboard it has no wifi icon at all. I checked the manual and there is no mention about wifi key. The F12 key, there is only the airplane mode which does not work, if I press it separately or with the FN, he does nothing. Other FN keys work well and I reinstalled the driver of QUcikButton as well.
  So my question is: How can I activate wifi {assuming that there is a key for activation of it} or what driver should I install so I can even see the network wifi device? Please help I'm desperate groing

  Troubleshooting steps: I tried to install several drivers from the Ralink site and 802. 11B drivers which is suppose to be the wifi device I have on this machine. Also tried several reboots laptop. I also tried searching google and went through a lot of topics here, but never found same problem or a solution to my problem. Would be grateful for any advice, thanks.

  I don't know exactly what card ralink I have because I do not see in the devices

  This problem has been resolved here

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/problem-in-finding-wireless-LAN-driver/m-p/4597202

  Thank you!!!

• Cannot install HP Photosmart Plus B209 full feature drivers on Windows 8

  Help, please. I'm stuck in a swirl of installation nightmares HP and there seems to be no leaks.

  I have a new laptop to Windows 8. The short story is that whenever I have try and install drivers for my HP Photosmart Plus B209a all-in-one comprehensive features, nothing happens. Although printing function still works, neither Windows nor an app or program that recognizes the scanner, and therefore I can't scan. I tried following instructions for a clean uninstall of the old drivers and then reinstalling the most comprehensive features, but still no installation occurs.

  History a little longer: the entire system (including scan) worked fine on my old laptop to Windows 7. As explained above, printing works fine on the new laptop Windows 8 (Windows seemed to automatically install some drivers when he realized everything first the HP device has been connected to the network), but I can't scan for love nor money - Windows Fax and Scan or MS Paint never recognize that there is a connected scanner. I tried to install the latest drivers for full functionality and the center of solutions for the product (file name: PS_AIO_06_B209a - m_140_408.exe [1/1, 228.58 M] from: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109701-1&cc=us&dlc=en&lc=en...) but each time, after downloading and extracting, nothing happens - no setup or welcome screen just nothing. Files extracted up to 100%, a CD cymbol appears briefly, then nothing. Bizzarely once, did it come with the screen of welcome Setup with the options 'Install' or 'Out', but after clicking in 'Install', nothing happened. Since then, I can't seem to go beyond the stage of extraction

  So I have followed the steps proposed elsewhere to do a clean removal of the old drivers and reinstall - notably by ensuring that all relevant programs are uninstalled, the temporary files are erased, the device is removed in Device Manager, restart the computer, etc., but nothing works. Whenever I have download the new driver, it will not be passed the phase of extraction.

  All advice on this, or there at - it another way to get the work of service scan? Please put me out of my misery...

  Thank you, Jack

  At this point, I'd run the option Windows 8 r .

  This Microsoft link explains this option.

  Read the note & WARNING messages.

  Make sure you have a backup of all your b4 of personal files running the Update.

• Wireless connection not connected

  Original title: wireless connection

  I am running winxp and have a netgear wndr3400 wireless router. my laptop will not recognize the wireless network, regardless of how many times I install it. The network connection again, it is not connected, but it is! I'm at my wits end with this thing. Anyone can connect to it, except me. Help!

  Hi rowinghome,
   
  Here is an article that lists resources to help you solve problems of network connection in Windows.
   
  In Windows network connection issues

• PHOTOSMART PLUS B209a-m: PHOTOSMART PLUS B209a-m does not print the data entered.

  Printer was working fine, but recently had a few power outages in 48 hours.  After the second blackout, we noticed that if we tried to copy and print something, what we would have would be a picture or a diagram of a post, for example I tried to print a tax document of our mortgage company.  The pre-printed outline was shaped did print, but the data that have been added by the mortgage company (name, address, etc.) do not have.

  If someone can guide me in the right direction to rectify this situation I would really appreciate it.

  Hi @Whitey16,

  Welcome to the HP Support forum.

  I understand that your printer HP Photosmart Plus all-in-one worked very well until you've had a few power outages. Since the outages, the printer has been printing a ' photo or diagram of a post "where to send print jobs to the printer on your computer Mac OS X 10.11 El Capitan. I would like to help with that.

  The first thing we want to do is to test the functionality of the printer without a computer. Try to print a report to ensure that the functions of the printer printer ok on its own.

  

  If the report of the State of the printer print, then we need to look at the software & drivers used by the computer.

  Then I would reset the printing on Mac system. Here is a document of support from Apple that you can use if you need help with that - reset the printing on your Mac system.

  Once the system has been reset you will need to add the printer back in. When you add the printer you want to be sure to choose the printer drivers and not the driver "Airprint" in the menu drop-down 'Use' on the window "Add" of the printer. Here is an another Apple su [document report that can help you with that - Add or remove a printer.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HP Photosmart Plus B210 Series does NOT print black

  I use Windows 7 to print to the printer HP Photosmart Plus B210 Series. The black cartridge has been listed as half full, but I installed a new black cartridge with no improvement. I selected the clean and align the print head, but the printer prints only the color inks and not black. I checked the vent of the cartridge on the black ink cartridge, and it is clear.

  Any suggestions?

  I have completed the troubleshooting steps and nothing fixed the problem. I even followed the instructions for soaking the printhead for 10 minutes in hot water. I guess that the printhead has gone bad and needs replaced. Thanks for your help.

• Wireless connection not detected

  I recently bought a new HP Pavilion 15 PC, and the first weeks the WiFi worked until a couple of days, when it shows just an X on the spectacle of the wireless connection that I am not connected. I checked the wifi of the University which worked well for everyone.

  Please can someone advise me on how to solve this problem.

  Here is a link to the driver wireless for your laptop:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134463-1&cc=nz&DLC=en&LC=en&OS=4158&product=7132453&sw_lang=