DTP plugin failed to connect to 10g DB that uses SERVICE_NAME instead of SID

Similar Questions

• Connectting to a modem that uses the Protocol PPPoA

  That's basically the problem.  There is no PPPoA options to select and I'm not sure what I should do!

  Thank you

  Mark

  OK, after losing an entire day on what I finallly got this job.  If you connect a Livebox to a router Linksys-WRVS4400N, using the Livebox as modem DSL (PPPoA) is what you need to do.

  1. find the version of the Linksys router.  Its on the router itself, mine was version 1.1

  2. update the firmware.  It's a pain to find.  The WRVS4400N is in the section of small business on the Cisco site.  You must then go to the model of router page and look very carefully through the links from the bottom.  I tried searching directly for it and seemed to have no chance.

  3. I think he should just keep resetting the router whenever you do something, but go to the Livebox configuration and change the settings of firewall to low.  The router will replace it.

  4. The Livebox is just a modem now so its probably to a value to disable the wireless network.  Then turn off the Livebox

  5. plug ethernet in the lan on the Livebox red and the other end into the Internet port on the WRVS4400N, switch on the Livebox

  6. plug WRVS4400 LAN 1 on PC.

  7. when it connected goto 192.168.1.1

  8 Hope you get login and see the installation/summary page.

  9. click on Setup - WAN and ensure that his auto in DHCP

  10. it's the bit you need to know.  Click on configuration - LAN tab and change the IP 192.168.2.1.  It's the missing piece!

  10.1 the setup page now is 192.168.2.1 to remember or you will fall with yourself!

  11 go back in the configuration - summary, then click on renew DHCP.  You should see the address IP WAN to change and the LAN IP 192.168.2.1 read.

  12 watch this world very satisfing appears on the logo of connections.

  I deserve a bloody Medal!

  Thanks to Linksys UK dept for your help and all the other bitty posts, I've read through to get this working.

  PS To change your pronto security settings and make sure your network attachments are behind the Linksys, not the Livebox!

  Mark Britton

  (Mod Note: deleted non-public information.) (Thank you.)

• How to stop the connectivity between two computers that use the same IP address... ?

  Today, I managed to connect two computers with the same IP address. But now it is to be feared. for example, a person can access my computers using my IP and MAC address. So now, how can I stop the connectivity between these two computers. should what setting I use to stop.

  Tahnks.

  Hello

  1 have. what measures you taken to connect 2 computers with the same IP address?

  2. How are the 2 computers connected?

  3. how exactly you want to stop the connectivity between 2 computers?

  I want to tell you that 2 computers on the same network cannot have the same address. Each machine must have a unique address to identify it. A private network, as a home network connected to the internet, can be connected to a router to connect to the network, will have only 1 address, public IP address.

  In addition, if we know the IP address of a computer along the user ID and password, we can access the computer/shared files.

   
  If you are referring to the change of the IP address of the two computers, you can follow these steps and check.
   
  a. network connections open. Click the Start button, and then click Control Panel. In the search box, type 'adapter' and then, under center network and sharing, click view network connections.
  b. right click on the connection you want to change. Click on properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the network tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click the properties button. To specify your IP for IPv4, click on use the following IP address, and then, at the address IP, subnet mask, and gateway boxes by default, type IP address settings.
   
  A typical IPv4 address looks like 192.168.0.2; a typical subnet mask is 255.255.255.0. The default gateway is usually the address of your router.
  For example, IP address: 192.168.0.2 by 192.168.0.12 (for computers)
  Subnet mask: 255.255.255.0
  DNS: 192.168.0.1
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?

• PE2950 DRAC5 - failed to connect - channel access denied

  I have a new PE2950 with DRAC5.   When you try to start a console from the webmin DRAC, (after all security warnings, updates plugin warning, blah blah aaargh) I get an error "Failed to connect" "channel access denied."  It's using IE7 for a Windows XP PC.  The server is running Windows 2003 Enterprise Edition.

  I notice that, unlike the older DRAC, I see no drivers or DRAC hardware listed in the Windows 2003 Server OS device manager.  Maybe the Windows 2003 drivers are needed?   I could not of course find them on the OpenManage CD supplied with the system (despite the label of the CD to the contrary)

  
  

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.

• Cannot get mail that failed to connect to my server

  Cannot get mail

  Failed to connect to my server

  Hello parkspa,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!

• Failed to connect, what is my password to overcome this problem?

  Failed to connect to the server imap - mail.outlook.com ; Enter the new password. A new password has been entered, but nothing happened.

  Email passwords are between you and your email provider. Nobody here knows your password.
  The best solution is to find a reliable perspective of supplier and dump. There someone here on all the other days with the same problem with outlook.

• Get the "Failed to connect to server" error after having my hosting of emails expire and reconnected. Using the latest version of Thunderbird.

  Hi, I am probably doing something really basic and easy to fix but facepalmingly pls have patience with this n00b...
  My emails with Crazy Domains Hosting has expired a couple of months, I've just managed to get it reconnected.
  When I open Thunderbird once again, I kept getting the error msg "Failed to connect to server".
  I checked all the settings for the account, they are all fine as far as I KNOW. Updated to the latest version of Thunderbird, tried to restart the program and doesn't have the obligatory IT Crowd "troid torning it and turn it on again", still get the same message.

  Plaaaaiiss... Halllp!

  Regardless of my fault for typing. What is important is that there is nothing in the DNS or whois on the domain.

  Look at their own whois server it shows pending deletion, expired in April. http://www.crazydomains.com.au/WHOIS/littleredfoxdesign.com/#result

  Until these public information are corrected your not likely to be able to connect because Thunderbird can not find the server. There is no DNS records to point to it.

• failed to connect to the SMTP server

  I can't send mail in ThunderBird sometimes. I use 31.5.0 version but I was wrong this problem in older versions either.

  It is said:
  "The message could not be sent because the server name of the SMTP server connection failed. The server is may be unavailable or refuses the SMTP connections. Please check that your SMTP server is correct and try again, or else contact your network administrator. "

  Sometimes, every time. But really bad situation for me. It happens with hotmail, gmail and with my own email accounts. For the time being. It sends to all accounts except for Hotmail. I tried not in http://kb.mozillazine.org/Connection_errors_-_SMTP , but there is no change.

  Could you help me please abou this problem?

  Is - this smtp.live.com which does not send?
  Try this:

  SMTP.live.com / 587 / TLS

  Authentication the same as POP3 (username and password)

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• Utility of fingerprinting Toshiba - "Failed to connect to the sensor.

  Having a problem with the Toshiba fingerprint utility. The program works fine until I try to use any sort of firewall/antivirus program, even the built-in Windows Firewall: S the scanner still works fine for the boot time scanning, as well as for windows logonm but as soon as any kind of firewall/antivurus software loads up, it fails to connect on the sensor. I added the program to the lists allow but still nothing... So far I tried with AVG Internet Security, Outpost Security Suite and by default, the Windows Firewall. Windows Firewall turned on for awhile, I got when I bought the laptop and there was no problem.

  It's a Qosmio X 500 - 00 X, it uses the same installation of windows when I bought...

  See you soon!

  Hello

  Please update the software of fingerprint. You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try a different firewall and AntiVirus. I have good experiences with AntiVir and Kaspersky Security Suite.

• Drive not work in IE and saying failed to connect with fingerprint sensor

  Hi all

  I purchased a Qosmio x 500 10 t a couple of months back. For the first two weeks, I had no probs using the fingerprint reader to log on windows and connect to Web sites in Internet exploer.

  All of a sudden it would not work on any website that is stored. The Green banner was shown in the upper part of the site and asked finger drag, but nothing happened when I slipped. I rebooted and it worked again but not for long before failing. This time a restart didn't work so I deleted my fingerprints and Web sites and started from scratch. It worked for a few attempts before probs started. And to try to enter the utility of fingerprint it says the connection of sensor failure. So, I did a system restore. He worked for some time yet and then same probs. So I found the update utility software, uninstalled the old and put on the new. Even once worked for a couple of times then failed.

  I couldn't find anything about it is stuck in the registry but to be on the safe side I did a full system own return to the original using disks of backup configuration. Hey presto, I thought that he had worked. Everything goes ok for the first 24 hours and then same problems start to occur. Only this time it's also prompting me to register fingerprints even if I already have. And when I try to enter the utilioty it says cannot read the sensor again.

  The fingerprints for windows log still works as long as I do not close the utility of fingerprinting before stopping. If I quit the utility I can't reopen it as it says failed to connect to the sensor only. And then I have to uninstall and reinstall the utility software. Aty at the time where he occasionally works on sites stored Web, but most of the time it does nothing.

  Help, please. I have to return Toshiba laptop?

  Have you seen this FAQ?
  + Log on to websites with Authentec Fingerprint Software (TrueSuite) and Internet Explorer 8 +.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=62

  I recommend looking in the forum and read the HowTo and FAQ section in this forum
  Could still be interesting

• Satellite L855 - 11 p: Win 7 - user profile Service failed to connect

  Can not connect. The message reads user profile Service failed to connect. User profile cannot be loaded"

  Y at - it a bypass key?
  Ideas please.

  Fine machine when I logged out/shut down last night but can not pass this message today.

  Hello

  Please take a look here in this Microsoft Knowledge base article:

  [You receive a "the user profile Service has no logon error message:"] http://support.Microsoft.com/kb/947215]

  There are different ways to fix it.

  Your comments would be appreciated.

• the adobe flash plugin failed and none of the solutions have helped

  the adobe flash plugin failed and none of the solutions listed in the section help objects! I tried all the solutions listed, but none seem to work.

  This has happened

  Each time Firefox opened

  He started a week ago ==

  Why Flash is now so unstable in Firefox? Flash broke down indicator is now a familiar visitor (it's usually when I refresh the page isn't extremely mortal!) But... I'll have to go back to IE to check the reliability with my own sites - which are heavily dependent on flash for animation and video. What can we do? My installations of Firefox and Flash are updated. Really disappointing.