Dual display Windows XP

Similar Questions

• 7 merger, El Capitan, dual display: Windows now refuses to use the second screen

  Fusion 7.1.2

  End 2012 27 "iMac (2560 x 1440, 2.9GHz i5, 24GO RAM) with a 24 '' Dell Ultrasharp (1920 x 1200) connected by a Thunderbolt-HDMI connector cable.

  Guest operating system Windows 7 (and a couple of VM Ubuntu, not relevant here).

  Before, I would start merging and Windows 7 would start automatically, as it has to do. He will start in his own space and use two screens, with the windows desktop 'main' (with the taskbar on the screen of the Mac) and the Dell used to extend space office (just like OSX).

  I just upgraded to OSX to El Capitan and now it's borked:

  1 Windows 7 starts automatically with Fusion (despite still be configured for this purpose). It is a minor annoyance but nothing more.

  2. that's the real problem:

  Windows displays the "BIOS" screen, and then the graphic screen "starting windows", then goes black. In preview VM library, I can see the login screen, but in the space of Windows, nothing. Just black.

  When it happened first, I disconnected the monitor Dell, rebooted, logged on to Windows on one screen, then plugged the Dell back in and it worked. However, reconnected the external monitor on each startup of the machine is not my idea of fun or "just work".

  I changed the display settings of VM Win7 molten (changed "use full resolution for the retina display" section, "Scaled high resolution" 'Unity only' drop-down to "all display modes" and now I can see the Windows login screen in half the width and height of the main screen.) If I log in I get two desktops to a Windows display value, crammed into the width, and half of the height of the 27 "display, with nothing on the external monitor. No amount of reconnected does not change this.

  I restarted the VM and OSX more than once since upgrading to El Capitan, so a simple reboot won't be the solution.

  Help!

  He drives me crazy, any suggestions?

  I had another couple of VM Ware support calls and there is a solution (which works for me) and a fix promised in the next version of Fusion 8 (I presume it comes to version 8.0.2) which should be days (rather than weeks) away.

  The fix may or may not be folded in to Fusion 7.

  The workaround is: parameters of OSX--> Mission control--> check "screens have a separate space.

  The downside is that when dragging between spaces, you often have to swipe the two screens, top menu bars have more two screens in OSX, but I can cope with it for a few days.

• Explore Windows crashes when multiple instance are open on the dual display

  When I have several instance of Explorer windows open on the dual display and I start copying files from one folder to another folder, Explorer plant

  Thanks, it works for me.

  I uninstalled DisplayFusion and there are no more problems with the files to be copied.

• SE Pavilion a4313w support dual display?

  My A4313W will support dual display? If this is not the case, what should I upgrade and what should I put to date?

  2.2 GHz AMD Sempron

  3 GB RAM

  Windows 7 64 bit

  Here are the full specifications for your HP Pavilion a4313w desktop. As we said already, your factory-installed power supply is only 250 watts and cannot support the requirements of most graphics cards at retail. If you want to install a discreet graphics card into the PCIe x 16 computer slot, you will need to upgrade your power supply the minimum required by the graphics card. For more information, see Guide of Big_Dave for the selection of a discrete video card .

  If you don't do any game and want more screen space for the trading day, spreadsheets, word documents, etc., please consider a video-to-USB adapter as the EVGA UV more + UV19 or EVGA UV more + UV39.

• Dual display capability

  I own several PC Slimline box office 400-314. Supposedly, they are able to dual display. Can I just connect 2 monitors to integrated video connectors (one VGA and one DVI) motherboard and re - configure the OS Setup ' display? If so, I'll be able to expand the office and 2 browser windows open?... .or will the office be duplicated?

  Hello

  Review the specifications of the motherboard and such information as published at HP.

  HP has an official presence on this forum other than for administration and moderation. The help you receive is mainly by volunteers.

  If you have any other questions, contact HP support. HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Why my "display windows and tabs from last time ' does not work?

  Hi all

  I used to have my settings set to "display windows and tabs from last time." For some reason, it does not. Whenever I close my tabs, Firefox warns you me I close many tabs, and when I reopen it Firefox, I only get my home page.

  In the menu options, I put 'windows and tabs from last time' options, and in private life, I have "Firefox will remember history", so I do not think it is related to my settings.

  I saw a thread on 'browser.sessionstore.enabled' must be true about: config, but I don't have even a name preference that says "browser.sessionstore.enabled. Maybe that's the problem? If so, I have NO IDEA how to fix this. I only am not at all computer savvy.

  If someone could find a solution to this very annoying problem, I would be very grateful. If it takes a lot of work of programming/techno, please be VERY descriptive (pretend I'm a 5 year old child in giving directions).

  Thank you!

  Browser.sessionstore.Enabled is no longer used, worry not if you can't find it.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history – which will prevent the restoration of the work session.
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  You can check the prefs of . browser.sessionstore * including browser.sessionstore.resume_from_crash on the topic: config page and reset the browser.sessionstore prefs that are correct (in bold) user via the context menu in the default value to make sure that the Session Restore is enabled and functional.

  • http://KB.mozillazine.org/Session_Restore

• Dual Boot windows Linux 8.1 on Pavilion 17-e157eo

  Will there be a completely safe way for a dual-boot Windows 8.1 and Linux on a Pavilion 17-e157eo?

  I searched the dualboot topics, but solutions do not seem to apply in this case.  Secure boot has been disabled. Quick start has been disabled. In this PC disk partitions are not dynamic but simple.

  Starting from a Live Linux DVD results in a blank screen even if the DVD player is clearly read something.  Is the problem due to the fact that this PC has the INTEL 4600 graphics chip and an AMD Radeon 8670 M?

  A better solution would be to use VMware or VirtualBox, set up a Linux guest operating system, the host system is of course Windows 8.1?

  No problem, glad I could help. If you could mark one of my posts with an acceptable Solution and congratulations if this information was useful, it would be much appreciated and it would be useful to other institutions. Thank you and have a great day!

  Mario

• Re: Tecra S11 - Dual boot Windows 7 and XP

  I installed Windows 7 (from the hidden to the hardrive recovery section) on my new Tecra S11. I would like to know if I can use the Windows XP
  recovery media provided by Toshiba to create a dual boot Windows 7/Windows XP rather than go back to XP?

  Hi dualboot.

  As far as I know it of not possible to create a dual boot with XP and Windows 7 Toshiba Recovery disk. The problem is that the recovery disk erases the entire HARD disk, so there is no option to create a dual boot with another operating system.

  If you want XP too you need to a normal XP installation disk Microsoft or you use virtualization of Windows 7 XP mode, if some n t applications run on Windows 7. ;)

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them

• Display windows and tabs from last time, how to make Firefox...

  In my 'options', I selected "display windows and tabs from last time '. On some accounts of users, or in some cases, it will be, in fact, open all the windows from a previous session. At other times, or in some cases, it opens only the last window I closed. How do all the windows to open since the last time I was online?

  Only the last window is restored if you close one by one with the X Windows close in the title bar.
  
  You must use File > Exit Firefox to close all the open windows at the same time if you want to reopen several windows.

• CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Tile: CMT Compaq dc7100 Dual Boot, Windows 7 Pro and XP Pro

  Hello everyone.  My computer is adjustable having the dual boot with Windows 7 Pro on disk 0 (320 GB SATA Seagate Barracuda 7200.11) and XP Pro disk 1 (40 GB SATA Samsung SP0411C). As the two systems are available at the start but most all the time Windows 7 Pro would use. The computer is Compaq 7100, WCL PP255US, 3.2 GHZ Intel Pentium 4, 3 GB of ram, Council ch h 0968, bios HP 78 1 v01.05 16/06/2004, chip Intel 915 G Express.  According to the website of Seagate Barracuda 320 GB with (quote), ' he not there no master/slave because every player relationship is considered to be a master in a relationship from point to point.» If two drives are connected to a Serial ATA host adapter, the host operating system considers that the two devices as if they were the two "masters" on two ports separated. Both drives behave as if they were device 0 (master) devices.  On the drive Samsung (SP0411C) I put a jumper for master, it is connected to the motherboard instead of disk 1. Used rider illustrated for Samsung SP0411N since I did not see the SP0411C listed. When selecting information for Samsung Seagate site sometimes showed data for their readers. This is perhaps due to the recent acquisition of Samsung or maybe my mistake.  Tried swapping around wiring of each drive but that didn't work of course. Looked at the settings in the BIOS but did not see a way to create the dual boot.  Please let me know if you need more information. If you know how this can be done or have some suggestions, please let me hear it. As always, thank you very much for your comments.

  Oscar

  Hello oscarmint, I checked the specifications of your system and it does not show the system supports two types of hard drives.

  The system supports only Serial ATA (Sata) synchronous Maximum 150 MB/s transfer rate

  You would need to make the jumper on the Seagate 320 GB Sata Drive pin, set at 150 MB/s.

  You are right that the Seagate would not Cable Select or slave settings and it would be the master and only on cable.

  If the 40 GB hard drive is a type of ATA (IDE), you'd better put as selection of cables (CS).

• I added third monitor display windows on it but the mouse is not going on the third screen

  I added third monitor display windows on it but the mouse is not going on the third screen

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. does the problem occur when you are working on a particular application?

  We will define the third monitor as primary monitor and check the functionality of the mouse.

  Link:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=XT_Tjm0Ldrb

  Please return to the State of the question.

• Due to an unidentified problem, Windows cannot display Windows Firewall for windows server 2003 r2

  I opened the firewall windows on windows server 2003 R2 and also installed a quick heal antivirus total security 2009 valid until April 2, 2012

  display error on the screen due to an unidentified problem, Windows cannot display Windows Firewall settings

  thanx

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• due to an unidentified problem, windows cannot display windows firewall settings

  I am running win xp home edition SP3, cant acess windows firewall. I get the following error message: due to an unidentified problem, windows cannot display windows firewall settings

  Any ideas on how to solve this problem?

  "Due to a problem not identified, Windows cannot display Windows Firewall settings" error, try:
  Start > run regsvr32 hnetcfg.dll [Enter]
  MS - MVP - Elephant Boy computers - don't panic!

• "Receive error message" due to an unidentified problem, Windows cannot display WIndows firewall settings "when you turn the Windows Firewall

  Original title: how to enable the Windows Firewall?

  How can I activate the Windows Firewall?

  When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".

  I use Microsoft Essentials antivirus.

  Hi Tom,

  A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.

  Perform the steps from the link below and see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Hope this information helps.