Dual monitor issues

Similar Questions

• Dual monitor issues on Windows

  I run a workstation Xeon Dell dual with a NVIDIA Quadro NVS 310 512 MB video card. Several times my monitor is black when you enter a keyword. Other times, the screens of 1st and 2nd swap locations. Today, I lost the main screen of LR and had only screen 2nds discovers. At the same time, the windows, the task bar disappeared, so I Ctrl = alt = delete to exit.

  Someone knows how can I avoid these problems?

  Blessed excrement! After frustrating months of bi-ecrans LR questions and a month of waiting for an answer on this forum, I called Adobe technical support. Only five minutes before dialing, I had updated my PhotoShop CC application. When the useful Adobe tech classmate is online, I can't reproduce all the issues that had been plaguing me. It is a stretch... a biiiiig stretch... but he is feels/figure/seems that PhotoShop CC update has fixed my bi-ecrans LR problems! I'll keep track of what other programs I use and open while LR - ing to see if they are relaxing, but for now, everything is quite in front of two monitors.

• How to install dual monitors in Windows XP?

  Original title: I have more xp dell. Two monitors. A video card plus double the original video card. How can I get my TV wired to computer with s-video plug in? Thank you

  I installed the dual video card. I got hooked tv before but unplugged & cannot get hooked again.

  Hi Ben,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you cannot configure both monitors. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  Did you of recent changes to the computer before this problem?

  Try the methods provided for in article below and then check after each method:

  Setting up dual monitor:

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=1bZqH23uobu

  If the problem persists, post your reply with results and questions above. We are happy to help you with the advanced troubleshooting steps.

  It will be useful.

• How to hide the icon of Timbuktu pro, if you use a dual monitor?

  Original title: TIMBUKTU Pro

  Hello

  Is it possible to hide the icon of TIMBUKTU Pro, if you use a dual monitor?
  Either way, TIMBUKTU Pro is a program to monitor a machine without noticing that they are under surveillance.
  Thank you.
  Kind regards
  tan111

  Hello

  I "d suggest that you contact the manufacturer for the best help on the issue.

  http://www.Netopia.com/software/products/TB2/win/

• Dual monitor crashing my computer

  Hello

  I am currently under a dual screen setup with my monitor and a separate screen. It seems to work fine for a while and then all of a sudden my computer will start to act up, and then it will go to the blue screen of death. A small window pop up at the bottom left says there is a problem with my video card driver, but I have updated their and still get the same problem.

  Info:

  Laptop - Toshiba Satellite M300 - 4 GB RAM - Vista Home Premium

  Screen - Samsung SyncMaster 245BW

  Graphics - ATI Mobility Radeon HD 3470 graphics card

  Also, I checked the information page on the ATI website for this video card, and they even state it supports dual monitor.

  
  

  Thanks in advance, Scott

  EDIT - if I remove the VGA cable connect my laptop on the screen while my computer crashes, it will return to normal after a second or two. However, if I try to plug it back in then it will take to crash my computer.

  Hello

  Could be hardware related if they update the video drivers would be way to start
  This troubleshooting. Don't forget to check the minidumps and the event viewer for more information
  and you can paste the relevant information in a message here by using the two utilities listed below. His
  possible controls of catalyst can be in the game, check with Support ATI and their forums
  for problems known.

  ATI - drivers
  http://support.AMD.com/us/gpudownload/pages/index.aspx

  ATI - Support
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI/AMD forums
  http://forums.AMD.com/game/

  =======================================

  You may also check with the support from Toshiba and forums for known issues.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ===================================================
  ===================================================

  To solve the problems:

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Dell MDS14 Dual Monitor Stand, Portrait orientation?

  Hi all there a Dell MDS14 Dual Monitor Stand. I just want to confirm if one of the monitors can be in portrait orientation?

  I want to mount one 24 inches horizontally and the other 24 inches in portrait mode.

  Thanks in advance.

  If anyone is interested, Yes, you can mount the monitor in portrait mode using the included vesa plate.

  All you need to do is fix the vesa plate in the necessary direction and fix.

  The only issue is that it adds about 5mm is not Ras if you align perfectly flat monitors horizontally.

  But if use you it like me and have a slight angle inward at the portrait screen it's a problem no.

  PS, if you need to rinse, you can always mount two monitors with vesa :) plate

• Dual monitor dilemma: dvi - d, out of reach

  I have been running this Setup dual monitor since late December and have had no problems so far. But before I did my primary secondary monitor and tried to run 'Civilization beyond Earth' (which I've cranked up for the highest possible settings) on it and was greeted with "dvi - d out of reach of the 67.5 khz/60 Hz" on a black screen. So I restarted my computer, which only complicated the issue because my LG (which again, read "dvi - d out of reach of the 67.5 khz/60 Hz") was my main monitor, and so I couldn't connect. It's been fixed only when I unplugged my other monitors the dvi cable, and my login screen appears.  I can run the other monitor as my primary, but only if the LG is unplugged, and as soon as I plug my LG it becomes main monitor and displays new "dvi - d out of reach of the 67.5 khz/60 Hz", which means that I can't do my other monitor primary so that the two are connected.

  My questions are: You have an idea, what is the problem? Or how to fix it? I can't stop the LG to the monitor main spot? Why is it read "dvi - d out of reach of the 67.5 khz/60 Hz" when the two are connected?

  Graphics card: AMD Radeon R9 270 X

  Monitior problem: 20 "backlit LED LG 1600 x 900 display

  Hey Joe,

  Thanks for posting your concern on the Microsoft community.

  With the description you've provided, looks like there could be some problems with the resolution of the video card.

  I suggest you increase the refresh rate of the video card and check if that helps. You can follow the steps described in the following article:

  http://Windows.Microsoft.com/en-us/Windows/correct-monitor-flicker-refresh-rate#1TC=Windows-7

  Note: If you notice flicker on a CRT monitor, you may need to change your screen resolution before changing the refresh rate. The resolution is high, the higher your refresh rate should be, but not every screen resolution is compatible with every refresh rate.

  For more information, see

  Change your screen resolution:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Changes to the refresh rate affect all users who log on the computer.

  Hope this information helps. Let us know the State and do not hesitate to write back to us for assistance.

• The main screen becomes secondary in a Setup dual monitor (DVI-HDMI)

  Original title: WINDOWS PROGRAMMERS: problem with OS Windows7 not being not able change the numbers of identifiers when using multiple screens and HDMI

  To be clear... This problem is with the Win7 OS - no video card GUI that allow to change number ID display on multiple monitors.

  Problem with several screens and the use of HDMI cables substituent and #1 assuming that for its corresponding display view identifier.

  Not always ID desired.

  But there is no way to change this.

  EXAMPLE:

  Monitor is configured as primary display (ID #1) using a DVI cable

  Then I connect my SONY Bravia or my LG HDTV displays using HDMI cables, the new screen automatically takes over as the display identifier #1 and the monitor becomes identifier #2.

  -This introduces to the identifiers is not something I want, need or want to deal with every time I use several displays. And it creates problems.

  There is NO way to correct or modify the identifiers.

  Please provide a FIX as soon as possible if you have an ounce of concern for the customer service.

  The solution can be as simple as:

  GO to THE control panel - appearance and customization - display - change display settings:

  Right CLICK... on one of the displays in the window to the left of "Detect" / "identify."

  Then the OPTION 'Change display login' with a list of relevant identifier numbers according to the number of multiple connected screens.

  Click 'apply '.

  CLICK ON 'OK '.

  and Voila! View identifiers are defined.

  WINDOWS:

  We, your customers, look forward to the difficulty of Windows update that contains this fix a lot expected and necessary.

  Thanks in advance for your collaboration and concerns about our satisfaction and ease of use than the loyal customers of your software.

  Feel free to send me the BETA version of the patch when his complete: * e-mail address is removed from the privacy *.

  Hi Jean-Pierre.

  Thank you for all the information related to the issue.

  This problem may occur if the display of the configuration settings dual monitor retain the configuration. Possible reasons could be installed on the computer outdated display driver.

  1. What is the brand and model of the computer or the graphics card?
  2. Are you using double display card? Sometimes changing the display settings for the display cards might solve the problem.

  First of all, if you have a display of the map or media panel installed on the computer, go to the control panel and change the setting under multiple display change. Assign the identity number according to the status monitor, then check if it retains the configuration when you restart the computer.

  Additionally, make sure that you have installed the latest version of the display driver for Windows 7 from the website of the manufacturer of the computer. Sometimes, if the driver is not being updated, the setting may not keep the entire installation. See the link to know how to update the driver on Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please keep us informed.

• I have a Setup dual monitor.  When I paste develop settings from one image to the other, Lightroom going on the active window.

  Strange problem.  5.5 Lightroom.  Windows 8.1. Setting up dual monitor.

  I am processing a lot important photos.  I have #1 monitor set as my main to develop the window with #2 monitor configured only to display a larger version of the image, I work with. If I copy the parameters of development out of a picture and try to paste them on another image, Lightroom will increase from the #1 to the monitor #2 monitor in the main window to develop and does not display anything on the monitor #1.

  If I then try to paste develop settings on another image on the monitor #2, LR then displays a larger version of the image, I have been working with the #1 monitor.

  To work like I want to, I have to constantly drag my develop the window back to the #1 monitor whenever I try to paste the settings on a new image of development. How can I make this stop?

  I have similar (but different) problems dual monitor. Just posted this on my thread unanswered. It may be useful:

  Blessed excrement! After frustrating months of bi-ecrans LR questions and a month of waiting for an answer on this forum, I called Adobe technical support. Only five minutes before dialing, I had updated my PhotoShop CC application. When the useful Adobe tech classmate is online, I can't reproduce all the issues that had been plaguing me. It is a stretch... a biiiiig stretch... but he is feels/figure/seems that PhotoShop CC update has fixed my bi-ecrans LR problems! I'll keep track of what other programs I use and open while LR - ing to see if they are relaxing, but for now, everything is quite in front of two monitors.

• Dual monitor in first Pro CC

  Just updated yesterday and thousands of others.  Had no problems whatsoever.  Opened for the first time this morning and support dual monitor disappeared.  I go into Preferences-> playback and the box is always checked yesterday.  I unchecked, saved, restarted the computer, restarted, it re-enabled and the second monitor displays always only my desktop.  Pulls up to After Effects and support dual monitor still works fine.  My colleague has not had the same problem.  I'm on an iMac 2012 with 20 GB of Ram, using a bolt of lightning DVI adapter for the second monitor.  Still, second works fine for everything but the first monitor and it worked yesterday.  Any ideas?

  Thanks for the quick response.  I came back to the post that we had solved when I saw your post.  In my case, the issue was that first was 'pending' just a pixel or two on my second monitor that prevented to use it as a second screen.  Not sure how that is spent, but thought I'd share in case someone else has the same problem.  I'll keep your thing in mind for the future too.

  Thank you.

• Dual monitor problems / external

  I recently bought a netbook NB200/007 and want to use two monitors (mainly for display of pictures etc on larger screens)

  It came preloaded with Windows 7 starter, after having found that the Starter edition did not support dual monitor that I've upgraded to Windows 7 Home Premium, but I'm still not yet to make it work.

  When the external monitor is connected, the netbook picks it up and sets up two monitors, but the external screen does not light (it remains in standby mode) I tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my main screen.

  If anyone has a suggestion of how I could get it to work, I would greatly appreciate.

  Kind regards.

  Hi puma325,
  install the 'value added package.
  This will add some features like "Fn + F5" for switching the display...

• HP Compaq dx2000 format Microtour - upgrading graphic support dual monitor?

  Hi, I have a question about the HP Compaq dx2000 format Microtour. The link to the form is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=support...

  I was asked to provide a solution for this machine that will support dual monitor. Can someone tell me please on a possible graphics card I buy (probably second-hand) that will be compatible with the motherboard on this machine and will also support dual monitor?

  Thank you very much!

  Paul

  Hello:

  If you only run XP and don't have no plan to upgrade to Windows Vista or Windows 7 and just VGA (not DVI) output, this PCI video card should work for you, and your machine has only PCI slots.

  http://www.eBay.com/ITM/PNY-nvidia-fx5200-Dual-VGA-DDR-256MB-video-card-PCI-/160704820819?PT=PCC_Video_TV_Cards&hash=item256ac0f653

  You will need to read the installation manual on the support page and the driver of your PC because I believe that you need to change a setting in the BIOS to the PCI card to the video card main.

  Or you can search for a similar PCI card with a DMS-59 output with video split cable that goes to two monitors.

  Paul

• E-mail and calendar will not connect on a dual monitor system.

  I have a MacBook Pro (15-inch, mid-2012) running on Yosemite 10.10.5.  I currently have a system of dual monitor hooked up with an Acer monitor (version: AL1916W Abd ~ Jan. 2008).  When I use this monitor as Desktop 2 and move my apps to email and calendar to this office, I suddenly find that mail will not receive any new messages very well and the calendar will often lose the connection and does not update to mobile.  I thought maybe of interference on the WiFi, but Google Chrome runs on the desktop at the same speed as on my laptop.  Perhaps it is still a form of interference, but I don't know what is the cause or how to fix it.  Perhaps the monitor is too old and now is not compatible with my operating system?  The monitor is connected with a VGA XAVIER to converter Thunderbolt and a VGA cable normal VGA.

  The internet I use is the internet at the University where I work, so reset the router or something like that is not an option.  Help?

  Please open the Mission control pane in system preferences and uncheck the box marked

  Viewers have separate spaces

  Log off or restart the computer.

• HP 251-a123w: I have a Setup dual monitor using VGA and DVI - D ports?

  I want to connect my HP 22uh monitor to my office using a DVI - D to DVI - D configuration.  Then I would like to complete a Setup dual monitor by connecting an Acer X193w monitor to my office using a VGA VGA configuration.

  Is this possible?  Two ports on my desktop computer can be used at the same time to support dual monitor?

  I see that the cables double monitor are in the form of Y and I thought that maybe a single port may be used simultaneously.  If someone knew this information then it would save some time & money on experimentation...

  Monitor HP 22uh was bundled with my new desktop PC and I cleaned the Acer to my now deceased Vista system.  It is in very good condition, would like to add.

  LSUfan71

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the use of the video taken two DVI and VGA and wanted to help.

  According to the technical specifications of HP for your PC, both of these jacks can be used at the same time.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Dual monitor on HP Pavilion p6610f

  I would use two monitors on my HP Pavilion p6610f desktop computer.  I have two lcd monitors.   I buy a vga adapter digital and connected a monitor to the VGA in the back of the computer and plugged the adapter connected to the other lcd screen in the digital output on the back of the computer. The monitor connected to the digital output signals no signal.

  Can I use a Setup dual monitor on a pavilion p6610f using video output that is on the motherboard, or do I need an additional video card?

  Thank you

  cardsinstl

  Hello

  The monitor which does not have a DVI port?  What make and model of the monitor does not work?

  Sending a digital signal to an analog monitor won't work.