Dual OS, do not install it

Similar Questions

• beatsaudio all in one office: drivers for broadcom WLAN dual band do not install

  After the upgrade to windows 10, I checked the updates from Microsoft and HP through the HP support Assistant.  All updates installed HP exceptiont for 'dual-band Broadcom WLAN drivers for Windows 10'. It will go through the controls and good download.  I retried several times after you restart the computer.  Also do not install is Office XP Service pack 3 - microsoft updates.  Error message 0 x 80096004.  I was wondering if I missed something.

  Hello

  I seemed to have solved my problem with the installation. I went on HP website and download drivers page

  http://WWW8.HP.com/UK/en/drivers.html

  then I went through the features of the device (I put in my model number product after choosing a couple of options).

  This led me to a page showing a photo and a description of my all-in-one and below and on the left side who has been

  Solution and Update Finder

  • Troubleshooting
  • Software and Drivers 3
  • How
  • Product information
  • User guides
  • Video tutorials
  • Several Support Options

  Solution and Update Finder

  The update and the Solution finder scans the connected HP product that you use to identify and recommend possible solutions:

  • Software and firmware updates or missing drivers
  • Errors and hardware problems

  Find Solutions

  How to install the software and collect HP?

• Software CyberLink will not install on Win 8

  H8 1380 t CTO, Intel i7 3820 processor. 16 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, Radeon HD 7570-1 GB graphics card.

  Hello

  Installed Win 8 (own) on a second partition, (dual-boot factory Win 7 and Win 8 on the second partition). Installed all the software and drivers from HP for this system without any problems except for the elements of Cyberlink,"error 1603" code.

  Any suggestions on why Cyberlink programs will not install?

  Thank you

  Hello

  Check the compatibility of your products from Cyberlink here.

  The HP position maintenance for Cyberlink is only an update.

  If you have installed under W7 from Cyberlink, then try the "check compatibility" button to see if improvements are required.  So just try to install Cyberlink under W8 then click on the products tab Compatibile.

  BTW, nice PC.

• Some of my important software are not installed on my system

  VISTA WITH XP

  SIR / MY AM RECENTLY I M USING WINDOW VISTA HOME PREMIUM, BUT SOME OF MY IMPORTANT SOFTWARE ARE NOT INSTALLED IN MY SYSTEM.

  THEN I TRY TO INSTALL WINDOW XP SP2 WITH VISTA BUT XP WOULDN'T BOOT...

  PLEASE GIDE ME HOW CAN I INSTALL XP ALONG WITH VISTA...

  Thank you

  Hello

  do not post in all capitals

  It is considered being shouting and is VERY difficult to read!

  Dual Boot Vista and XP with Vista already installed

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html

  How to dual boot Vista and XP (with Vista installed first) - the guide step by step with screenshots

  http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm

  ____________________________________________________________

  and reading this on your programs:

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.

• Vodaphone VMB Lite will not install on Windows 8 Pro clean install

  Vodafone Dongle (Huawei K3770) advertising software. NetFramework 3.5 (versions 2 & 3 inc) must be installed via the internet - download 3.5 full version via Windows 7 will not install on Windows 8 Pro - tick Windows 8 Pro add features to install also calls to access the Internet - this own is almost useless without internet access and must be considered incompatible with Vodaphone Dongles and combination of dual-boot.

  The upgrade on Windows 7 H & P (providing 7 is fully updated) works ok but degrades to the operating speed of the Hp Pavilion dv7 3111ea

  Hi, I have activated. NETFramework 3.5 as explained above. The driver of the Vodafone Dongle loaded but when I connect, the PC gives the following error message and reboot: bad_pool_caller

  What can I do?

• How to restore a security entrancecode that was not installed by updating to ios10?

  Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed.

  I use an entrycode before this and the same works after that.

  No longer is my ability to import on my Imac out of the photo on my iphone, it says in Iphoto: cannot import as device is held by entrancecode, you need to unlock the device to import the photo.

  My unlock does not work. I tried to connect to itunes, tried to reset, but so far nothing works.

  What can I do?

  Hello

  Go to settings touch id & password if you can't do this support.apple.com contact

  See you soon

  Brian

• Sierra of downloaded OS but have not installed. What should I do now?

  I downloaded macOS Sierra, but it has not installed. I rebooted the MacBook Air without success. What should I do now to get installed it.

  Download and installation are separate steps. You should be able to find 'Install macOS Sierra' in your Applications folder. Double-click it to start the installation. It would really be a good idea to first make a backup complete and bootable.

• I have a 2008 iMac - how do Yosemite or El Capitan.  Sierra will not install.

  I have a 2008 iMac - how do Yosemite or El Capitan.  Sierra will not install (I want either the hack).

  I never 'got' Yosemite or El Capitan when they were available on the Mac App Store.

  The only way I've found is to get it on Apple's developer site, but I'm not a developer.  Apple how to flip the switch to the Mac App Store so that it shows up on top of my list?

  On this iMac, you should still be able to download El Capitan:

  Update of OS X El Capitan - Apple Support

• IOS 10 problems, do not install

  Do not install ios 10

  Lost all cellular network connection, only the research/network not aviable

  IPhone 6

  Hello, johrog!

  Thank you for joining the communities Support from Apple! Looks like you are having a problem connecting to your cellular service. I know how important it is that the iPhone is connected correctly. Learn the steps of articles If you can not connect to a cellular or mobile data network. This will give you some great options to solve the problem and be able to use your iPhone!

  See you soon!

• Not able to restore iphone6 due to error code "latest version of itunes is not installed", however the latest version of itunes is installed.

  Not able to restore the iphone 6 due to the error "latest version of itunes is not installed", however itunes version 11.4 is installed.

  11.4 is not the latest version of iTunes.

  12.4.3 is the latest version of iTunes.

  It requires Windows 7 or later or OS X 10.8.5 or higher.

• Primetime content decryption module do not install

  I have recently 'refreshed firefox' and now the Primetime content decryption Module is not installed. I never had this problem before and I refreshed firefox several times, but the Plugin is still installed. He repeats to me "Module of Primetime content decryption provided by Adobe Systems, Incorporated will settle soon."

  Please reply and thanks for the help.

  
  

• Airport utility will not install

  When I try to install AirPort Utility on my iMac running OS X El Capitan 10.11.6

  I get the following message;

  AirPort utility cannot be installed to this disk.

  The version of Mac OS X on this volume is not supported.

  could you please help.

  concerning

  Stephen

  OS X El Capitan is already bundled with AirPort Utility v6.x. It seems that you try to install the older v5.x for the utility. Unfortunately, this older version will not install on later versions of OS X.

  If you require administer an older 802.11 g AirPort access point you will need a Mac running OS X Lion or earlier or a Windows XP or 7 PC.

• El Capitan will not install. Window disappears after pressing the button install.

  Hello world

  Looks for some install help. I try to install El Capitan for my Mac Mini. Here are some features:

  Mac Mini (mid-2011)

  OS X Yosemite 10.10.5

  Intel Core i5 2.5 GHz

  Question: El Capitan does not install anything after clicking on the button after choosing the drive. The window simply disappears and nothing happens.

  I have read all the threads to locate the file "install OS X El Capitan", but it leads to the same question.

  What other options can I here? I tried to create a new admin user to install the operating system, restarted my computer, re - download the file, etc..

  I ran out of options here. Help, please!

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Firefox 37.0.2 is not installed

  Manager tasks indicates that 7z SFX (32-bit) Setup is running in the background, but the application does not install.

  Try this:

  • Download the installer of Firefox and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/
  • Start the installation by double-clicking on the desktop icon

  You may need to temporarily disable your security software or start the computer in Mode safe mode with network support Windows (on the startup screen, press F8), if you keep problems.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/