dualboot 8 and 7 victory

Similar Questions

• DualBOOT WinXP and Win98

  I tried to do for about 2 weeks, market and trying to get Windows 98SE & Windows XP dualboot correctly. I had success but am still not satisfied. Here's what I tried.

  1st attempt:
  -Essentially have a base with 2 primary partitions drive - a (Win98) one FAT32 NTFS (Windows XP). First, I installed Windows 98 on C: (FAT32), then installed Windows XP later on D: (WinXP). It was all great job for awhile and after some time I suddenly wasn't able to boot in Windows 98. Something had changed during the installation of programs over several days, so I restarted from scratch once again.

  2nd attempt:
  -Basic disk I had on a set of primary partition of 500 MB to active for just Boot (C: FAT32), about 1/3 of a primary partition for Windows 98 (E: FAT32) and about 2/3 of a primary partition for Windows XP (NTFS D :). Of course, I installed on the disks appropriate using C to boot to XP system files and 98. Installed XP first on D: and 2nd Win98 on E: - then I could only start XP again and Windows 98 was not able boot upward as he wanted to BE D: drive because Win98 is unable to see NTFS partition and think that there was nothing there so my boot.ini file were conflicts with that.

  3rd ATTEMPT (successful):
  After frustration, pulling on my hair and such things, I said screw it. I did an active primary partition (2/3 c: FAT32) and a 2nd primary partition (1/3 d: FAT32). So I installed Windows XP on C: first and Win98 on D: - it's all good and dandy except... I want my XP in NTFS security!

  AN IDEA: So right now, I say to myself, screw the partitions, equip a 2nd hard drive (primary slave / primary master). Master on XP NTFS, slave on 98 FAT32 - both primary partitions and can be active (or not?). But now I wonder if even that will work as loads off C: the boot for WinXP/98, and Windows 98 is an atheist, when it comes to NTFS partitions - they simply do not exist.

  ANOTHER IDEA: Find a decent boot loader. I've heard a lot of GRUB, but I wonder if this is the way to go because it seems that GRUB is used mainly for Linux/Unix dualboots.

  Here's WHAT I WANT: I want a WinXP NTFS (for security reasons) and a Win98 FAT32 work. Usually my Windows XP is about 2/3 of the space system and Windows 98 is of about 1/3 the space system.

  For all partitions to dualboot I use a 60 GB so you do the math. I have a spare 40 GB I thought put in Windows 98 separate conflict still further, but for some reason any after my failures, that it doesn't seem like I'm going to avoid conflicts...

  WHY THE TROUBLE? : you can ask - I just want to be able to play old games on Windows 98 with DX8.1 and have a working system of XP for all newer games (which are still old...) - in other words to benostalgic.

  Other questions on the installation made me know.

  PS Wait I will post everything trying to launch BITLOCKER partition Win7 with Bootcamp on my Macbook Pro. This one will be even more interesting...

  Get Ranish Partition Manager and install sound code MBR bootmanager.

  Then, at the prompt "boot HD...", press 1 or 2 to select the boot partition.

  No need to make entries special boot.ini, as boot partitions quite separately from this way.

  Also works for Linux, install LILO/Grub in the boot sector of partition, NOT the MBR, and once again you just press the partition number to select.

  http://www.Ranish.com/part/

  "P.S. wait until I post about trying to run BITLOCKER on partition Win7 with Bootcamp on my Macbook Pro." This one will be even more interesting... »

  Don't call us... I don't know that forum Mac Help well. (Just don't tell them we said that!)

• for a week and the victory like 7 and mse will be automatically updated and the problem is not repeated on my copy of licened end clean to stall

  I installed clean several times to offer since the victory of 10 factory restore was deleted in July 2016 none of my operating system of windows and MS security essentials error code 0 x 80004004 were able to auto update via windows update.

  I used the stand-alone version and which do not work Ive used all update patches, they do not work ive not done reference also with the cmd no results at this stage, the problem is not on my end, so the problem seems to be in the Microsoft server ends that would be true?  net internet connections work on my end

  Windows 7 update problems? First read this.

  :)

• Equium L350 - 10L: how to make dualboot - Vista and XP

  I need help.

  How could I install an operating system of Windows XP and all keeping my Windows Vista.
  It's like having two operating systems in one.

  My laptop model is Toshiba Equium L350 - 10L.

  Thank you.

  Best regards

  Carol

  Hello Carol

  Just in a few words: If your laptop is preinstalled with Vista original recovery image please make sure that the HARD drive has two partitions (C and D also check disk management). Windows XP must be installed on the second partition. For the installation of Windows XP Home edition, you need Storage Manager. Without this Storage Manager disk HARD won't be visible for the installation of Windows XP Home edition CD.

  On this forum, you will find number of threads with the exact description how do.

  At the end you must start Manager. Using this boot manager, you will be able to choose which operating system you want to use.

  If you have any other questions please post again.

• How to fix corupt fileC:Documents and Settings\Victoria\Local Settings\Temp\toolbar_log.text also known as vprot.exe is file corrupted how can I do

  vprot.exe is the corrupted file, how to fix

  [Moved from comments]

  Hello

  (1) did you make any changes before the show?

  (2) which you use Windows operating sytem?

  (3) who is the program antivirus installed on the computer?

  Vprotection is a part of AVG Safe Search Toolbar; Some malware will be a miscarriage as vprot.exe.

  If you have installed the AVG program, I suggest you to uninstall and reinstall the moy.

  If you need help with the application, I suggest you to contact AVG support.

  Reference:

  AVG forums

  http://forums.Avg.com/in-en/AVG-forums?sec=theme&Act=show&ID=1

  Let us know if that helps.

• Mg8220 and new victory 10 computer drivers help

  Hello

  I need to install new drivers on my computer running win10 x 64. I have a MG8220 multifunction printer. There are several pilots and I need help to choose between xps and mp drivers. Can you tell me what to choose please?

  MG8200 series MP Driver Ver 1.01 (Windows 10/10 x64/8.1/8.1 x 64/8/8 x 64/7/7 x 64/Vista/Vista64/XP/XP x 64)	22/07/15	18.29 MB	SELECT
  MG8200 series XPS Printer Driver Ver. 5.56 (Windows 10/10 x64/8.1/8.1 x 64/8/8 x 64/7/7 x 64/Vista/Vista64)	22/07/15	15,68 MB	CLOSE
  This file is a printer driver for printers Canon IJ. XPS printer drivers supports 16-bit printing, which allows to print more smooth gradation than the current drivers (8 PCB printing). File name xp68-win-mg8200-5_56 - ejs.exe

  Do I have to install the firmware too?

  Printer Firmware Updater (Windows) for the series MG8200 Ver.2.2	11/11/15	43.00 MB	SELECT
  MG8200 series printer Updater Instructions for download	12/28/11	116.03 KB

  Thanks in advance for any help

  Hello.

  Download and install the driver for the MP.  The XPS driver is optional and is required for some programs.

  It is not necessary to update the firmeware for Windows 10 use.

  If additional information is required, find more help contact us.

• Dual boot 7 and 8 victory

  I'm dual booting win 7 and 8 on my old computer win 7 but cannot get my win 7 programs on win 8. Win 8 says there is no conflict of compatibility, so can't understand why I can't run these programs. What do I need to reinstall completely all programs on the connected to them, like Quicken data files and what others?

  I'm dual booting win 7 and 8 on my old computer win 7 but cannot get my win 7 programs on win 8. Win 8 says there is no conflict of compatibility, so can't understand why I can't run these programs. What do I need to reinstall completely all programs on the connected to them, like Quicken data files and what others?

  Yes, you will need to reinstall all your applications. In regards to your personal files, you could probably go through the partition of Windows 7 under Users\Your_Account

  You may experience permission errors, so it is recommended you start in Windows 7 and backup your data using Windows Easy Transfer and restoration of Windows 8.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• Android and Windows 8 DualBoot - Acer W700P

  Hi folks, I'm David from South America and I have this great Tablet since last year, that's great, but I would like to install android and Android, so that I can dualboot windows 8.

  I tried to install the latest 'android - 4.2.2_r1 - ia2"use"Generic UEFI Installer", I followed the steps as shown in the quick start page, but I found problems between the path, the first was a message while trying to start mode EUFI saying that the:

  DiskName % has been blocked by the current security policy

  then I read somewhere that the implementation of a supervisor password would allow me to change the settings of the UEFI, within those parameters has been an option for select trust uefi files, browsing the UEFI USB created in the quickstar page and select all the files in a folder called efi EFI, I could then start the first screen of the installer , and then you try the manual installation option gives me an error and get stuck there...

  I know that some people were succesfull install Android from the page open source intel so please could you share the steps to follow to install Android and have dualboot with the large W700

  Please share your comments, because for sure, there are a lot of people willing to try the DualBoot - Android and windows 8

  Disable your security strategy uefi on yout start menu, assign an administrator password and disable the security check. DualBOOT android AI on w700 has been done successfully.

• Satellite Pro L850-1NR - dualboot Win7 / Win8

  Hello world

  I use my L850 - 1NR Satellite Pro for the school. I go to a technical school for information technology, and we use windows 8. The problem is that * Windows 7 preinstalled * on my laptop and home, each PC works with Windows 7.

  When you buy a Satellite Pro L850 1NR, you get two * installation Windows 8 CD *, if I want to make one * dualboot Windows 7 and Windows 8 *. I know how to create a new volume on my hard drive, but when I run the first disc, the only option is to remove Windows 7 and install Windows 8.

  Is it possible to dualboot this and if it is possible, what should I do?  :|

  Hello

  Windows 7 is pre-installed on your laptop. 8 win was provided on DVD discs.

  In both cases; Win 7 and Win 8 is part of the image of Toshiba.
  Toshiba is a package containing all the drivers, tools and utilities.

  It s is not possible to keep the Win 7 on the HARD drive and install 8 additional to win using the recovery disk provided.
  Why? Because this isn't clean system Win 8, but as mentioned; his image.

  But in general, its possible to have a system dual boot (8 Win and Win 7). The start menu will be created that will allow you to choose between Win 7 and Win 8 OS.

  You will need to create simply new partition in Win 7 system.
  Then, you must start the MS Win 8 disk clean and could install the 8 Win on the new created partition.

• After you have installed Windows 7 Ultimate, why is-from my laptop very high fan speed and battery remaining time very low?

  I installed the Service Pack 1 of Windows 7 Ultimate 64 bit on my laptop HP 1000. Since my cooling fan is almost went crazy and running at full speed all the time after in idle state for a half hour. The battery consumption also increased a lot.

  for example battery time was quite good before (3.4 hours) with fair use, but now he says 40 Minutes remaining with 50% battery left.

  There is no heavy process in the Task Manager.

  I have not installed a game or fancy software. (drivers & media players, browsers and photo viewers)

  Operating system: Service Pack Windows 7 Ultimate 64-bit (6.1, Build 7601)

  Model: HP 1000 Notebook PC

  BIOS: Version InsydeH2O 03.72.24F.12

  Processor: Intel Core i3-2370

  RAM: 2048MB RAM

  Need help.

  Thank you.

  Well until you install specific drivers of HP and no victory update drivers, you are flogging a dead horse, that its all controlled by the pilots of the system, not of victory

• Rescue and recovery question

  Can I do the following with the installation of a new hard drive in my x 200 under xp pro update with all SPs and patches victory. ?

  1 create a Rescue and Recovery Using ThinkVantage disc.

  2. backup the 'information' using windows backup on an external hard disk utillity.

  3. install the new hard drive in my x 200

  4. start x 200 with Rescue and Recovery disc

  5. connect the external hard drive and restore 'Any Information' using the xp utillity

  6 make essentially a version cloned my original hard drive in the hard drive installed one.

  Thanks for any help/suggestions.

  Of course, you can use your method

• Satellite 2450-101: slow video

  Hello!
  I see my nvidia in mode "snail". But I do not set up this mode.
  -Drivers OK!
  -J' have 512 MB of RAM. I use 256MB and nothing. I use one and the same.
  -In the BIOS, the value by default... but... the same thing.
  -In Windows XP and Linux (Knoppix 5.1)... the same thing.
  -In live CD Knoppix 5.1 USB DVD... the same thing.
  -In a film, the video is slow, its not slow.
  -In a test on another comparison system, my lost 2600 P4 and P2 victory for me. less than 100 MHz in R / w.
  That's happened? hard drive? NVIDIA in the motherboard?
  Sound of footsteps hear NOW, but I don't hear anything in the right (hotel?).
  HELP PLEASE?
  and thank you.

  Post edited by: JavierHernandez

  Post edited by: JavierHernandez

  Hello

  You should check if you have all codecs installed that is required by your system to play movies correctly.
  I suggest to restore your system, install the latest drivers for nvidia to these sites:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  and the last pack of codec from here:

  http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm

  After installation of all these things make him a comment if the problem persists...

  See you soon

• Satellite A200 - stop randomly

  Hello

  My laptop Toshiba Satellite A200 will stop randomly. First I thought, that the CPU is overheating, but its temperature is 50 degrees (Celsius), and it is good (I also change the fan). But my ATI radeon HD2600 graphics card has 50 degrees too and that's a too high temperature for nothing to do.

  Where could be the problem? What is the temperature of my gpu of closing?

  Thank you

  Sometimes when I turn on my computer, the temperature of the GPU is only 30 degrees
  I have a dualboot XP and Windows 7. When I turn on XP, the computer shuts down when booting, when I turn on Windows 7, it's not stop immediately

  Hey,.

  > First I thought, that the CPU is overheating, but his temperature is 50 degrees (Celsius)
  How to measure the temperature?
  As much as I know there is no formal program of Toshiba to check the temperature, and the 3rd party tools can show wrong temperatures.

  > But my ATI radeon HD2600 graphics card has 50 degrees too and that's a too high temperature for nothing to do.
  Who said that 50 ° C is too high for the GPU? In my opinion it s normal and ok, it won't be a problem.

  In your case, I would follow the instructsions here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  Theoretically it could also be possible that the thermal grease is too old and should be replaced. This can be done from an authorized service provider.

• Y510p clean install (software Lenovo)

  Hello

  I want to reinstall windows 8.1 on my Y510p with a USB (created with windows) recovery.

  First of all, I wanted to use the OKR (factory Windows 8), but I dualbooted ubuntu and know that it no longer works.

  I have al the drivers, but the problem is the software from Lenovo. I can't find Powerdvd, Youcam...

  Thanks for your help.

  Hello

  Today, I reinstalled successfully my laptop!

  First of all, I recreated all the OKR partitions with an ISO, I found on the web. Then I used a USB Ubuntu to put the file "install.wim" (which I have before backupped) on the recovery of the partition and then I could use the OKR to load the factory system!

  I'm so happy that my Lenovo is back to factory with work OKR settings!

  Thanks for your help!

• Replacement card mother T410

  Hi guys,.

  I've been Googling a few weeks now with no luck.

  I use a lenovo T410 Eh well try to use it, but keep freeze stops.
  I have windows7 64 bit installed, tried the dualboot win7 and linux, I tried linux only.
  I have checked/tested the hard drive memory, even replaced with ssd and continue to do so. I've updated to the latest version of the bios
  so, nothing has changed.
  So there must be something wrong with the motherboard.

  I am looking to replace the motherboard, but somehow, I can't find. I found a few but number of different type.

  Mine is 2519Y11, intel vga, fingerprint digital webcam sim slot 4 GB of ram, processor intel i5.

  So my question is what is the number of motherboard that I should look for what will be the same card?

  Thank you very much

  Alexa

  Welcome to the forum!

  If you want to keep the graphics card Intel you can search these FRU #.

  • 60Y5713
  • 60Y5714
  • 60Y5715
  • 60Y5734

  I hope this helps!

  MOD edit: Fixed bad FRU #.