DualBOOT WinXP and Win98

Similar Questions

• WinXP and first 6.5 and Dv500

  As I mention here http://www.pacifier.com/~jtsmith/ADOBE.HTM I use a Pinnacle Dv500 to digitize analog tapes... and I could not first 6.02 to run under Windows XP (maybe because the XP I had included SP2 when I installed first 6.02) so I found myself running dualboot with Win2000 use the Dv500 and WinXP to edit with PPro3

  But... before I create a new i7 computer... I found a new beam first 6.5 and Dv500 (never opened)

  Does anyone remember if added P6.5 compatibility Windows XP?

  P6.5 will work well if I insatll a previous version of XP that did not include SP2?

  Because I'm going again to dual boot, I use WinXP just to P6.5 and the Dv500 and scan then Win7 64 bit for real editing with PPro5 (when it comes out)

  She is an interior decorator, and when she doesn't have a client to use the generator idea in his mind, she looks around OUR House and it happens with projects

  Although not an interior designer, we'll often similar around our House too, if I can share your pain!

  Hunt

• Reading of Win95 and Win98 readers 3.5 "with XP Pro?

  I have a some floppies of 1.44 MB 3.5 "with files I want to transfer my XP Pro desktop computer.  When I try to play I get the message "Disk needs to be formatted" will erase all info on diskette.

  Is it possible to read these with XP.  They have been created using Win95 or Win98.  Some alumni have even Mac.

  The Mac which are not readable on a Windows System. Disks are a terrible way to keep data because they are deteriorating, damaged, and they can also become physically deformed so they will work only in the original floppy drive. If the disks are stored next to a monitor, the magnetic field of the wiped monitor them. It is not a question of Win9x-XP but more of a physical problem with floppy disks. A way to see if the discs are viable is with a USB floppy drive or the computer floppy drive another if you can find one. If they are illegible, even in this case, you can try the floppy data recovery programs. And here's one:

  http://www.jufsoft.com/BadCopy/floppy_recovery.asp

  Otherwise, just mix records in the trash. MS - MVP - Elephant Boy computers - don't panic!

• SP 420CDT - card PCMCIA and Win98

  Hello

  Don't know if anyone can help me, I recently bought a Satalite Pro 420CDT second hand with a fresh install of Win 98 SE.

  Win 98 recognizes that the PCMCIA ports are there and it says there are no conflicts but does not recognize the card when I insert it (I try to use a USB card with her to get USB ports).

  If anyone can help... Please

  Thank you

  Philip.

  Hello

  It's an old unit and only I can tell you is to check the BIOS settings. Press the ESC key while the laptop starts.

  at the second site of the bios is a PCMCIA card from point. Please change this setting

• dualboot 8 and 7 victory

  Hello
  
  I wanted a moment of 15 years and I would have win 7 for some old software operating mode. I have win 7 and its key and I made a bootable image. I mounted the image on a USB key by appropriate Microsoft software. What can I do now? Old computer mode I had to change the boot priority in the bios, what happened here? I don't know anything about new bios and uefi.
  
  Thank you

  Hello:

  You need to change some settings in the BIOS to be able to install and run windows 7.

  Please see the info below for the settings to change.

  http://support.HP.com/us-en/document/c03736054

• Qosmio G30-145: WinXP and RAID driver - no response

  I did everything that is needed for the installation of windows xp for Qosmio G30-145.

  Installation process is as a result: as in http://support.toshiba-tro.de/kb0/TSB56012H0001R01.htm and that worked, but during the installation of windows has started, you will be asked once more (first time I did format and second time that I did ' t format HARD drive): "INSERT THE DISK LABELLED"TOSHIBA RAID DRIVER"in the A: drive... "Press on enter when ready '- but no reaction... SOLUTION!

  Thanks in advance.

  Hello

  According to the Toshiba page suggested when installing Windows using to partition or format the HARD drive, the RAID driver is deleted in the process. This causes the shot the next time that the machine start-up.
  To avoid this, perform a partitioning and formatting before you run the manual installation of Windows.
  This behavior is not displayed during the installation of Windows XP with SP2 integrated

  Well, perhaps, you need a CD OS Win SP2 integrated?

  But why you do not use the recovery CD Toshiba delivered?
  On this CD, all drivers are preinstalled and you only need to install the OS from the recovery CD. All should work properly.

  PS: Just for the record: in the BIOS, you should find an option to disable (or change) the RAID.

• Equium L350 - 10L: how to make dualboot - Vista and XP

  I need help.

  How could I install an operating system of Windows XP and all keeping my Windows Vista.
  It's like having two operating systems in one.

  My laptop model is Toshiba Equium L350 - 10L.

  Thank you.

  Best regards

  Carol

  Hello Carol

  Just in a few words: If your laptop is preinstalled with Vista original recovery image please make sure that the HARD drive has two partitions (C and D also check disk management). Windows XP must be installed on the second partition. For the installation of Windows XP Home edition, you need Storage Manager. Without this Storage Manager disk HARD won't be visible for the installation of Windows XP Home edition CD.

  On this forum, you will find number of threads with the exact description how do.

  At the end you must start Manager. Using this boot manager, you will be able to choose which operating system you want to use.

  If you have any other questions please post again.

• M10: Recovery WinXP and datas

  Hello!

  Is it possible to avoid erasing the data on the HARD C: drive when you use the recovery of re CD - install Win XP?
  My M10 does not start Win xp to all options, but I need data on C bad.

  [Edited by: admin December 27 05 07:05]

  Hello

  The media recovery, you can only use for the installation of the OS and this way all data will be deleted because before the OS installation starts the HARD drive will be formatted. If you need certain data from the C partition, you can connect this HDD on another unit as external one.

  But if your data is already deleted from the trash I n t see is possible to do it again.

• Brightness, function keys, WinXP and Satellite Pro A200

  Hello

  I recently bought a Satellite Pro A200 (serial PSAE7E) with WIndows Vista and try to install Windows XP next.
  After hours of hunting for drivers (with moderate success) and try to install a XP in a privileged way (3rd partition main, 2nd is for Vista), I stopped.

  I am not able to get to work a function keys (keys, light, monitor, CPU frequency and wireless) XP. Under Vista, these keys only works when Toshiba Flash Cards application is running - when I turn this app, these keys are also unavailable (why?).

  I browsed a forum and found a few threads also wrote about this topics, update BIOS to version XP
  But I do not found answers to my questions:

  (* 1) * is a software (like FlashCards, but for XP) _Activer under XP system function keys? configuration: (Vista + XP + BIOS for Vista)

  (* 2) * if I install a BIOS XP version, what happens to my Vista system installed on my laptop? It stops stating, or function keys stop responding or even a different Components would be inaccessible?
  Someone has tested the configuration like this (Vista + XP + BIOS for XP)

  (* 3) * it is possible to Flash the BIOS to the version of Vista the XP version and still the version of Vista? (maybye I should Flash the BIOS before you start the system?)

  Currently I use the BIOS version 1.70 of Vista, Vista Toshiba Recovery DVD and XP SP2.

  Hi mate,

  long discussion, short answer:

  1. no it not there no software (no software officially released and taken in charge) that is available for XP on a Sat A200.

  2. your system will operate normally, only the behavior of the function keys on bios level will change. If you Flash the bios with the XP version that the function keys should be available under XP without any software.

  3 Yes, it s definitely possible to reflash the BIOS since many clients have machines with XP and want to use Vista (I never understand but hey..)

  I hope that every question has been answered.

  Welcome them

• nightmare of Java! do I have to have java on my dell laptop wit winxp and IE8?

  Downloaded version the most recent runtime and immediately lost internet connectivity. by mistake, they lack my safety to a proxy but did not provide an address. I want that they out of my computer.  are they essential?

  Hi rosearenas,

  Welcome to the Microsoft community.

  I suggest you go through the following information.

  You receive an automatic download of Java, it is from the Sun, not Microsoft.

  It is not for Windows XP; It is to your Web browser and you just, if you visit a site with Java Web content.

  You can follow the steps to uninstall the updates:

  a. Click Start.

  b. go to the control panel.

  c. navigate to add/remove programs.

  d. check the "Show updates" and then scroll down to the update that you want to delete.

  e. remove the update and restart the computer.

  You can also perform to restore the system to a system restore point before installing the updates. How to restore Windows XP to a previous state.

  http://support.Microsoft.com/kb/306084?WA=wsignin1.0

  You can also refer to:

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you need more assistance, answer us, we will be happy to help you.

• 10.2.01 install binary files on WinXP and Win2K

  Hi friendz,.
  
  I have an external usb with 1.5 to size.
  I want to join my laptop and install it on Oracle 10g.
  Say that the external drive is named e:\oracle
  
  Then after the installation of Oracle 10 g on it, I loose my laptop and attach it to a Win 2 K Server with the same disk name e:\oracle computer.
  
  My question is, the Oracle 10 g database will start at the new address? They are compatible to the binary format?
  I have to run some cloning or programs of restoring links?
  
  Thank you very much

  My question is, the Oracle 10 g database will start at the new address? They are compatible to the binary format?
  I have to run some cloning or programs of restoring links?

  There is a quiet difference under Win2k & XP, you are unable to connect these two binary.

• Android and Windows 8 DualBoot - Acer W700P

  Hi folks, I'm David from South America and I have this great Tablet since last year, that's great, but I would like to install android and Android, so that I can dualboot windows 8.

  I tried to install the latest 'android - 4.2.2_r1 - ia2"use"Generic UEFI Installer", I followed the steps as shown in the quick start page, but I found problems between the path, the first was a message while trying to start mode EUFI saying that the:

  DiskName % has been blocked by the current security policy

  then I read somewhere that the implementation of a supervisor password would allow me to change the settings of the UEFI, within those parameters has been an option for select trust uefi files, browsing the UEFI USB created in the quickstar page and select all the files in a folder called efi EFI, I could then start the first screen of the installer , and then you try the manual installation option gives me an error and get stuck there...

  I know that some people were succesfull install Android from the page open source intel so please could you share the steps to follow to install Android and have dualboot with the large W700

  Please share your comments, because for sure, there are a lot of people willing to try the DualBoot - Android and windows 8

  Disable your security strategy uefi on yout start menu, assign an administrator password and disable the security check. DualBOOT android AI on w700 has been done successfully.

• How to share a printer Canon MP 970 with a WinXP Dell laptop and a Dell of Win7 desk top?

  I recently implemented a Dell PC in Win7 professional desk top which is ethernet connected to Verizon FIOS router home. This configuration has replaced a desktop Dell 7 years under Win XP computer. In an adjacent room, I have a Canon MP970 USB printer connected to an old Dell Laptop for six years under Win XP and connected wireless to the router home. I was unable to configure the latest desktop computer Win7 to share Canon printer. Older Dell/WinXP (replaced) desktop has been configured to share the printer Canon with Dell laptop, WinXP and did successfully...

  In the laptop, I selected control panel > printers and faxes > sharing > drivers additional > environment, but can find no list for Win7. My thought is that the laptop must have the appropriate driver that allows it to recognize the request of Win7 Office to share the Canon MP970 printer. Thank you fo all help and advice from the community can offer.

  GrampyH

  Hi GrampyH,

  If you have a printer connected to your computer, you can share it with anyone on the same network. No matter what type of printer you have, as it is installed on your computer and is directly connected with a USB cable or other type of printer cable. The people from that your choice to share the printer will be able to use it to print, as long as they first locate your computer on the network.

  Printers that are directly connected to a network and not connected to a computer are available to anyone on the same network. These printers must have a network port or wireless connection that allows them to connect directly to the network.

  You can read these articles and check if that helps.

  Share a printer: http://windows.microsoft.com/en-in/windows7/share-a-printer

  File and printer sharing: frequently asked questions: http://windows.microsoft.com/en-in/windows7/file-and-printer-sharing-frequently-asked-questions

  Sharing files and printers: http://windows.microsoft.com/en-in/windows/sharing-files-printers-help#sharing-files-and-printers=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Dual Boot Vista and XP in separate hard drives?

  I currently installed on a hard drive in Vista and I have an extra which is 160 GB I want to install XP on so that I can dualboot both, is it possible?

  Remember that there is no partition in question here.

  The key which makes the task easier is to preformat the drive, assign a disk label (example: WinXP) and then launch the installation.

  How to dual boot Vista and XP (with Vista installed first) - the guide step by step with screenshots
  http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm

  Install Windows XP on your pre-installed Windows Vista computer
  http://www.howtogeek.com/HOWTO/Windows-Vista/install-Windows-XP-on-your-pre-installed-Windows-Vista-computer/

  As always, with the project like this create an image backup of your entire hard drive (to an external USB drive) first.

  Acronis True Image 2011 - has a 30 day trial version available.
  (Install Acronis and then create a restoration/Rescue CD Media before starting the creation of an image backup)
  http://www.Acronis.com/homecomputing/products/TrueImage/
  The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/download/docs/

  J W Stuart: http://www.pagestart.com

• Convert the remote physical computer Win98

  = & gt; SEE maybe INSTEAD: http://communities.vmware.com/message/1144827

  TOO MANY DEAD ENDS. I am very frustrated. Please help me find a new path, or convert a dead-end in a path of success!

  I need to move from a legacy Win98 to a virtual machine, bringing with it boot disk software that may not be installed or activated again.

  = #1 END =.

  I put the disc in a remote computer as boot drive. I can't convert Win98 remote physical computer to a virtual machine. )

  From VMware Workstation 6.5, I File/Import, connect to the remote computer successfully (name = michelle, username = guest, password = *). Then, I like the VMware Converter Agent needs to be installed temporarily on your remote computer. I then get a "failed to connect" error. In the vmware log file, I see the converter tries to a share named "\michelle\ADMIN$" there is no such action, and I don't know how you would set this to the top on the Win98 machine. This attempt will never succeed? In a help file, I read "the wizard of Conversion of VMware in Desktop allows you to import the following types of virtual and physical machines:"and Win98 is NOT in the list. "

  = #2 END =.

  Otherwise, I could build a v2I backup (.sv2i) and try to convert that. However, I vaguely remember trying to do this a few years ago, and it does not Win98. It may concern the converter does not support Win98

  = DEAD END #3 =.

  Otherwise, maybe I need to go back to a 'METHOD ZERO' tablecloth topic (http://communities.vmware.com/message/1140447#1140447) earlier suggested continuum "Port loses Win98 bootdisk to the virtual machine (guest)? ((I'm waiting on backup .qic below before taking the disc off another motherboard and put it in the host machine.))

  However, his method includes the use of vmware - vdiskmanager.exe. I do not have this program, and it appears to come only with the GSX server. All I have is VMware Workstation 6.5.X.

  = #4 END =.

  Otherwise... I'm currently a .qic BackupMyPC backup of the original diskette of Win98, now begin on another card mother. I hope that later have a Win98 VM with BackupMyPC and restore my backup of .qic original Win98 disk in the virtual machine. HOWEVER, I can't create the virtual Win98 machine. Other current running VMs can get to my CD, but this one won't boot off of it. I got the new VM at startup of a Win95 boot in DOS disk, and this virtual machine will now Boot C: in DOS mode. However, it does not recognize my CD-ROM as d:, whatever the configuration (image autodetect, d: or iso). So, I'm stuck again!

  = #5 END =.

  I noticed that Ghost 14 has its own ability to export to a VMware virtual image. However, Ghost 14 does not work under Win98.

  = DANGEROUS END #6 =.

  If I try to upgrade the operating system of the real legacy disk Win98, I'll probably break some features of other old tools I need, which are the reason why I can't start over again. Physically I could clone the drive, but it's probably another series of dead ends. The worst would be to get it all cloned and running to find the legacy of garbage tools...

  =================

  Thank you very much

  Helmut

  PS Where can I find vdiskmanager continuum 'method of zero?

  PS how to add this community to 'my communities '?

  You did say "or a second VM.  Of course, I don't know why a 'second' VM.  All I think that I need is a single machine virtual to run Acronis restore.  Why do I need TWO of them, or why I need this product LiveCD?

  Instead of overwrite your Windows XP guest, you can simply attach a new virtual disk... and replace this one... then remove the new virtual disk from VM WinXP and attach the same disk to your guest of win98 and start from there.

  It will be useful,

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki