Dublex on Officejet 8610

Similar Questions

• OfficeJet 8610: HP Officejet 8610 is offline now

  I bought an Officejet 8610 5 months and it has worked very well - so far.  It is continually being disconnected and I questions online.  Most of the time, I need to powercycle the 8610 and it usually comes online.

  Connected wireless

  I put the IPv4.

  3 PC, iphone, iPad 2, all work very well on wireless environments

  HP Print & Scan doctor sees no problem

  I can start the ability to scan when printing is offline.

  Is this a hardware possible security problem?

  Hello
  
  Thank you for using the HP Forums.
  
  Can you try using a TCP/IP port?
  
  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.
  
  This video resource will show you how do:
  
  Create & use TCP IP port
  https://goo.GL/BBI671
  
  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
  
  Let us know if it works

• OfficeJet Pro 8610: HP Officejet 8610 x 64 pro semi full rest

  HP Officejet 8610 x 64 pro semi full rest, administrator of lock on all the features after a power outage, now cannot print over the network, USB or wireless to the printer because the Administor lock on all the features.

  Found youtube video https://www.youtube.com/watch?v=_i1JkQJRhBM on how to do

• OfficeJet 8610: OfficeJet 8610 when you copy in duplex, one side to the other side

  When I try to copy multi-page documents, goes to 1 side 2 sides, one side is upside down. This works when the pages are in portrait setup but not when they are in the configuration of the landscape.

  It's COPY, not print, so I can't follow the advice to replace the flip setting. There seems not to be a setting on the printer itself to change that.

  I did a chat session with HP, but the problem was not resolved. I got a call a supervisor (level 2, no doubt), but I have not worked with them again.

  The printer is connected wireless. I run the installation wizard and the Finder solution and the update as well as the doctor of printing and scanning without result.

  Any ideas?

  Hi @Tiggy626A,

  I see you are having problems copying 2 sides in landscape mode. I will definitely do my best to help you.

  From the front panel of the printer, you can bind only on the long side, there is no option to change the copy to the short edge. I tried to copy 2 faces on our Officejet 8610 laboratory, one side released head downstairs. By experimenting, I found a solution, by loading the two documents to copy in the ADF file, load the other down. This will allow the copy two facing the landscape properly the printer. I know that's not very practical, but it worked out this way.

  This feature is available if you choose to scan documents and then print as a 2-sided document with a link on the edge short.

  Here is a document for the HP Officejet Pro printers 8610 - copying Documents.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• HP OfficeJet 8610: Install a new printer to replace an old HP printer

  I don't know what software to remove it from my computer.

  I am replacing an OfficeJet 7310 with an OfficeJet 8610.

  I installed the printer, then ran the tool on the site to make sure that it was installed correctly.

  I can't access my printer features as Solutions Center will not update. Looking for the old OfficeJet 7310.

  Here are the messages:

  Use the tool, you said. Yes, I did. Everything is installed correctly, here is the message: the current full HP software is already installed and drivers seem to be installed correctly. To check the functionality completely, click on the Test button below.
  
  Then I click on the HP Solution Center program.
  HP solutions Center can not run because your device installation is not complete.
  Please connect the USB cable or re-run the Setup program from the installation to a network installation CD.
  If it does not complete the installation or if you do not have the CD, access the HP help files, blah blah blah

  Hello

  The HP Solution Center program is affiliated with your old printer, it have nothing to do with the most recent 8610 printer.

  I would say running the 7310 below installation selecting uninstall, which will remove all the components of your old printer such as the driver of the printer, the HP, the features of HP digital imaging solution center to avoid such confusion:

  http://ftp.HP.com/pub/softlib/software11/COL30951/MP-76831-1/AIO_CDB_Net_Full_Win_WW_130_141.exe

  The software for your new printer (HP Priner Assistant) can be started by clicking on the HP Officejet Pro 8610 icon from your desktop or from the startup of the printer folder.

  Respect,

  Shlomi

• All-in-one HP OfficeJet 8610: All in one HP 8610 does not print right to police

  Hello

  you just bought a new HP all-in-one officejet 8610 to replace my 8600.

  I use a police - Babylon5 hollow - to print a message (like "COPY") to the text, in red (but result in black or any other color is the same).

  While my 8600 (and all my other printers) does it perfectly, the 8610 messes things.

  The lines of the police (I use the 50 size) are so thin that the text is as good as not there.

  I checked the settings of the printer, and they are substantially the same as for the 8600.

  Any ideas? I use this font for years, and I am very attached to it :-)

  Thank you

  Leo

  Hello

  It is not the solution, but I solved my problem by using another font.

  Thanks for the support,

  Leo

• Hp OfficeJet 8610: 8610 OfficiceJEt driver for win2008std R2 Server

  Dear Experts,

  I got the solution to install this printer driver OJ8610 on this thread:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/HP-OfficeJet-8610-can-t-print-using-STA...

  Now I need to install this printer on my Windows 2008 Server R2 64 bit.

  I stuck to find the right driver.

  Could you please help?

  Thank you

  Finally I found the solution here

  Thank you so much everyone

• How to eject an Officejet 8610 flash player after analysis of a file inside.

  I used the controls on the front panel of my Officejet 8610 to scan an image to a flash drive plugged into the front of the 8610.

  The 8610 has welcomed the presence of the player very well and placed the scanned image on it as you wish.

  But for the life of me, I can't figure out how to make a controlled release of the flash player.  (I finally made a stop controlled of the 8610 and removed the drive after that the 8610 turns off.)

  How do you make a disc flash of the façade, USB port?

  Hello

  Thank you for reporting the issue.

  For printer, you don't need to go to controlled ejection. Just remove it (out) of the printer and that there will be no problem for printer or your drive noise deaf. You don't need to close the printer to do.

  It's easy as 1.2 3.

  Good impression

• OfficeJet 8610: Trouble with sweep Officejet 8610

  I set up my officejet 8610, installed the disc is it came with. I'm trying to scan a doc on my Mac. It gives me a message failure scan noting that it could be the connection to the computer (which is not the case), scan app on mac is in use (I don't think), OCR app is not installed on the mac (what is this?). I don't know where to start. Please notify. Thank you.

  Hello @Robert34!

  Thanks for posting on the HP Forums!

  I would be happy to provide assistance about scanning with your Officejet 8610 to the Mac computer.  Software OCR stands for optical character recognition.  It's text-recognition software in a scanned image, so you can change it.  Unfortunately, it is not available for the Mac, but it should not prevent you from being able to scan.

  I recommend that you check the HP on the Mac utility to see if the scan of the computer is turned on.  To open HP utility go in your application and click on the Hewlett-Packard folder.  In the Hewlett-Packard folder, you should be able open HP utility.  Once you have the HP utility open click on Manage scan of the computer to see if it is enabled.

  If you are unable to scan, then I recommend using the Image Capture to scan.  Image capture is also located in the folder of the Application on your Mac.  You can also locate it by typing Image Capture in the spotlight (magnifying glass) in the upper right corner of the Mac.  Image capture to start the analysis of the Mac.  It has more options and settings for scanning and saving.

  Once you are in the Image Capture, select your scanner on the left side of the window.  It can be located under shared.  Once the scanner is selected, you should be able to change all settings on the right side before you click scan.  Below is a screenshot of what picture Capture looks like and all available parameters.  If you have not any settings that you should be able to click on show details at the bottom of the window.

  

  If please, after back and let me know if this worked for you!

• Select the default tray when printing from MS Word or any other application HP OfficeJet 8610

  Hello

  We have HP OfficeJet 8610 with additional tray. So, we have Tray1 and bac2. That's what I read in the specs of the printer about how we can use the bins:

  • Loaded into all of the paper trays and use paper from a tray if the other tray is empty
  • Loaded into all trays and paper of one of the bins first use
  • Be able to choose plain paper and another type of paper that you use occasionally

  My question is:

  Let's say that we have put the tray 2 as the default tray.

  In MS Word or any other application in layout, you can define special tray (say 1 tray) paper source. This means that the document should be printed on paper from the selected tray (Tray 1). But in our case, the document is always printed using paper from the default tray (tray 2).

  Could you please confirm that this is the expected behavior?

  Thank you so much, Ana.

  Hi @AnaGligorijevic,

  I understand that you want to be able to print the same document at different trays and change the setting via the Word software. This printer is not able to change the settings of the tray for different pages in the same document to multiple pages.

  To work around this problem, you can use the parameter to "print pages." "Select it print pages selected, then for other pages ' print pages" yet once and then change the parameters of the status bar of the application.

  The application, you can change the settings of the tray for 1 page or a multiple page document. But it will print all pages of the specified tray.

  Hope that makes sense. Thank you!

• HP officejet 8610: HP Officejet 8610 do not printing on HP premium photo 10 x 15 cm paper

  I tried printing on HP premium photo paper and it does not work. The message of the printer's paper. I tried with one page, 2 and 10 white sheets. The book is marked by HP's print face down. I tried to clean the rollers as shown here: http://support.hp.com/us-en/document/c04117836/

  The printer is new, it is the 4th piece of paper, that I try to print after 2 weeks in our House.

  Welcome to the community @lelouHP.

  I understand that your HP Officejet 8610 knows problems printing on photo paper. I will do my best to help out you.

  Did you try the other troubleshooting steps in the document below?

  Displays a Message "Out of paper" and the printer doesn't pick up paper for Printer series e-all-in-one HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 "

  If this isn't the case, I recommend you try all the steps in order and get back to me with the results as well as the problems or the error codes that you met.

  If you have tried all the steps in this document and you still experience the problem, then you will need to contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• OfficeJet 8610: Print PDF files

  I'm unable to print PDF files on my laptop my Officejet 8610.

  Please read this post then provide some details.  What operating system on your laptop? How is the connected printer - USB, wired LAN or wireless? There the error messages on the computer screen or the printer?

  What program are you printing from?  I would suggest trying the latest Adobe Reader, I've heard of some issues with some programs PDF.

• Officejet 8610 printing from iPad Air

  I just bought an all-in-one OfficeJet 8610.  I can use it to print from my iPhone, but not from my iPad Air.

  The only way I can print from my iPad Air is to use the hp eprint app.  Any suggestions?

  Thank you

  Hello

  Also, you should be able to print from your iPad to air. Try to restart your ipad to look and see if it appears in your list of printers avaialable - it's a simple solution that works sometimes.

• HP officejet 8610 Cup logos at the top of the emails

  My brand new HP Officejet 8610 Cup logos on e-mail printing

  Thanks a lot for your information.  I find the problem.  I am running Windows 7 and had "changed" the 'appearance' on my computer to default print size to print "means".  I went in a change of the 'appearance' to factor together, and he took care of the problem!  Thank you!

• HP Officejet 8610: what impression

  Under windows 7 and HP 8600 (I think) I could see what was printing and what was
  waiting to print.
  Under windows 10 and HP 8610 I can't find the option to do this.
  Thanks.
  

  @laruesj

  Printer:

  E-all-in-one printer, HP Officejet Pro 8610 range

  Full software features:

  File name: OJ8610_198.exe